Commit
This commit does not belong to any branch on this repository, and may belong to a fork outside of the repository.
Initial commit of a balun breakout board for the Mini-Circuits TC1-1-…
…13 transformer.
- Loading branch information
Showing
5 changed files
with
387 additions
and
0 deletions.
There are no files selected for viewing
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Original file line number | Diff line number | Diff line change |
---|---|---|
@@ -0,0 +1,82 @@ | ||
tc1-1-13-breakout | ||
================= | ||
|
||
A breakout board for Mini-Circuits TC1-1-13 transformer in | ||
a bal-un configuration. One side of the balun is configured | ||
for an unbalanced signal, and the other is configured for a | ||
balanced signal. | ||
|
||
Status | ||
====== | ||
|
||
This board has been fabricated but not yet assembled and | ||
tested, so its functionality is not verified. Use this | ||
design at your own risk. | ||
|
||
Bill of Materials | ||
================= | ||
|
||
This board was designed using the Mini-Circuits AT224-1 | ||
footprint. It should support any < 3 GHz transformer with | ||
the same footprint and pinout. See the corresponding | ||
component datasheets for further details. | ||
|
||
For Mini-Circuits TC1-1-13 | ||
-------------------------- | ||
|
||
The Mini-Circuits TC1-1-13 family of transformers operate | ||
between 4.5 MHz and 3 GHz. | ||
|
||
* T1: [Mini-Circuits TC1-1-13M+] | ||
(http://www.minicircuits.com/pdfs/TC1-1-13M+.pdf) | ||
* C1,2,3,4: DC blocking capacitors, 0402, C0G, value to | ||
suit application (typical value 100nF). | ||
* R1,2: Terminating resistors (optional), 0402, 1% or | ||
better, value to suit application. | ||
* J1,2: SMA jack, [Emerson 142-0701-801] | ||
(http://www.emersonconnectivity.com/OA_MEDIA/drawings/dr-1420701801.pdf) | ||
|
||
Requirements | ||
============ | ||
|
||
* [EAGLE 5.11 Hobbyist, Standard, or Professional] | ||
(http://www.cadsoftusa.com/shop/pricing/) | ||
|
||
Because this design uses four PCB layers, EAGLE "freeware" version | ||
will not be useful for editing this design. | ||
|
||
Files | ||
===== | ||
|
||
* tc1-1-13-breakout-breakout.sch: | ||
|
||
Schematic for circuit board, drawn in EAGLE 5.11. | ||
|
||
* tc1-1-13-breakout-breakout.brd: | ||
|
||
Circuit board layout, drawn in EAGLE 5.11. | ||
|
||
* tc1-1-13-breakout-breakout.dru: | ||
|
||
EAGLE design rules used to validate schematic and PCB. | ||
|
||
* tc1-1-13-breakout-breakout-laen4.cam: | ||
|
||
EAGLE CAM file used to generate Gerber RS-274X files for | ||
circuit board production via | ||
[Laen's four-layer PCB Order] | ||
(http://dorkbotpdx.org/wiki/pcb_order). | ||
|
||
License | ||
======= | ||
|
||
This design is licensed under a | ||
[Creative Commons Attribution-ShareAlike 3.0 Unported License] | ||
(http://creativecommons.org/licenses/by-sa/3.0/). | ||
|
||
Contact | ||
======= | ||
|
||
ShareBrained Technology, Inc. | ||
|
||
<http://www.sharebrained.com/> |
233 changes: 233 additions & 0 deletions
233
radio/circuit-board/tc1-1-13-breakout/tc1-1-13-breakout-laen4.cam
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Original file line number | Diff line number | Diff line change |
---|---|---|
@@ -0,0 +1,233 @@ | ||
[CAM Processor Job] | ||
Description[en]="<b>Generates Extended Gerber Format</b><p>\nThis CAM job consists of five sections that generate data for a two layer board.<p><p>\nYou will get five gerber files that contain data for:<br>\ncomponent side *.cmp<br>\nsolder side *.sol<br>\nsilkscreen component side *.plc<br>\nsolder stop component side *.stc<br>\nsolder stop solder sid *.sts<br>" | ||
Section=Sec_1 | ||
Section=Sec_2 | ||
Section=Sec_3 | ||
Section=Sec_4 | ||
Section=Sec_5 | ||
Section=Sec_6 | ||
Section=Sec_7 | ||
Section=Sec_8 | ||
Section=Sec_9 | ||
Section=Sec_10 | ||
Section=Sec_11 | ||
|
||
[Sec_1] | ||
Name[C]="Cream" | ||
Name[en]="Cream" | ||
Prompt[C]="" | ||
Prompt[en]="" | ||
Device="GERBER_RS274X" | ||
Wheel=".whl" | ||
Rack="" | ||
Scale=1 | ||
Output=".tcream.ger" | ||
Flags="0 0 0 1 0 1 1" | ||
Emulate="0 0 0" | ||
Offset="0.0mil 0.0mil" | ||
Sheet=1 | ||
Tolerance="0 0 0 0 0 0" | ||
Pen="0.0mil 0" | ||
Page="12000.0mil 8000.0mil" | ||
Layers=" 31" | ||
Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0" | ||
|
||
[Sec_2] | ||
Name[C]="Cream" | ||
Name[en]="Internal plane 1" | ||
Prompt[C]="" | ||
Prompt[en]="" | ||
Device="GERBER_RS274X" | ||
Wheel=".whl" | ||
Rack="" | ||
Scale=1 | ||
Output=".internalplane1.ger" | ||
Flags="0 0 0 1 0 1 1" | ||
Emulate="0 0 0" | ||
Offset="0.0mil 0.0mil" | ||
Sheet=1 | ||
Tolerance="0 0 0 0 0 0" | ||
Pen="0.0mil 0" | ||
Page="12000.0mil 8000.0mil" | ||
Layers=" 2 17 18" | ||
Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0" | ||
|
||
[Sec_3] | ||
Name[C]="Cream" | ||
Name[en]="Internal plane 2" | ||
Prompt[C]="" | ||
Prompt[en]="" | ||
Device="GERBER_RS274X" | ||
Wheel=".whl" | ||
Rack="" | ||
Scale=1 | ||
Output=".internalplane2.ger" | ||
Flags="0 0 0 1 0 1 1" | ||
Emulate="0 0 0" | ||
Offset="0.0mil 0.0mil" | ||
Sheet=1 | ||
Tolerance="0 0 0 0 0 0" | ||
Pen="0.0mil 0" | ||
Page="12000.0mil 8000.0mil" | ||
Layers=" 15 17 18" | ||
Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0" | ||
|
||
[Sec_4] | ||
Name[C]="Component side" | ||
Name[en]="Component side" | ||
Prompt[C]="" | ||
Prompt[en]="" | ||
Device="GERBER_RS274X" | ||
Wheel=".whl" | ||
Rack="" | ||
Scale=1 | ||
Output=".toplayer.ger" | ||
Flags="0 0 0 1 0 1 1" | ||
Emulate="0 0 0" | ||
Offset="0.0mil 0.0mil" | ||
Sheet=1 | ||
Tolerance="0 0 0 0 0 0" | ||
Pen="0.0mil 0" | ||
Page="12000.0mil 8000.0mil" | ||
Layers=" 1 17 18" | ||
Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0" | ||
|
||
[Sec_5] | ||
Name[C]="Solder side" | ||
Name[en]="Solder side" | ||
Prompt[C]="" | ||
Prompt[en]="" | ||
Device="GERBER_RS274X" | ||
Wheel=".whl" | ||
Rack="" | ||
Scale=1 | ||
Output=".bottomlayer.ger" | ||
Flags="0 0 0 1 0 1 1" | ||
Emulate="0 0 0" | ||
Offset="0.0mil 0.0mil" | ||
Sheet=1 | ||
Tolerance="0 0 0 0 0 0" | ||
Pen="0.0mil 0" | ||
Page="12000.0mil 8000.0mil" | ||
Layers=" 16 17 18" | ||
Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0" | ||
|
||
[Sec_6] | ||
Name[C]="Silk screen CMP" | ||
Name[en]="Silk screen CMP" | ||
Prompt[C]="" | ||
Prompt[en]="" | ||
Device="GERBER_RS274X" | ||
Wheel=".whl" | ||
Rack="" | ||
Scale=1 | ||
Output=".topsilkscreen.ger" | ||
Flags="0 0 0 1 0 1 1" | ||
Emulate="0 0 0" | ||
Offset="0.0mil 0.0mil" | ||
Sheet=1 | ||
Tolerance="0 0 0 0 0 0" | ||
Pen="0.0mil 0" | ||
Page="12000.0mil 8000.0mil" | ||
Layers=" 20 21" | ||
Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0" | ||
|
||
[Sec_7] | ||
Name[C]="Silk screen SOL" | ||
Name[en]="Silk screen SOL" | ||
Prompt[C]="" | ||
Prompt[en]="" | ||
Device="GERBER_RS274X" | ||
Wheel=".whl" | ||
Rack="" | ||
Scale=1 | ||
Output=".bottomsilkscreen.ger" | ||
Flags="0 0 0 1 0 1 1" | ||
Emulate="0 0 0" | ||
Offset="0.0mil 0.0mil" | ||
Sheet=1 | ||
Tolerance="0 0 0 0 0 0" | ||
Pen="0.0mil 0" | ||
Page="12000.0mil 8000.0mil" | ||
Layers=" 20 22" | ||
Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0" | ||
|
||
[Sec_8] | ||
Name[C]="Solder stop mask CMP" | ||
Name[en]="Solder stop mask CMP" | ||
Prompt[C]="" | ||
Prompt[en]="" | ||
Device="GERBER_RS274X" | ||
Wheel=".whl" | ||
Rack="" | ||
Scale=1 | ||
Output=".topsoldermask.ger" | ||
Flags="0 0 0 1 0 1 1" | ||
Emulate="0 0 0" | ||
Offset="0.0mil 0.0mil" | ||
Sheet=1 | ||
Tolerance="0 0 0 0 0 0" | ||
Pen="0.0mil 0" | ||
Page="12000.0mil 8000.0mil" | ||
Layers=" 29" | ||
Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0" | ||
|
||
[Sec_9] | ||
Name[C]="Solder stop mask SOL" | ||
Name[en]="Solder stop mask SOL" | ||
Prompt[C]="" | ||
Prompt[en]="" | ||
Device="GERBER_RS274X" | ||
Wheel=".whl" | ||
Rack="" | ||
Scale=1 | ||
Output=".bottomsoldermask.ger" | ||
Flags="0 0 0 1 0 1 1" | ||
Emulate="0 0 0" | ||
Offset="0.0mil 0.0mil" | ||
Sheet=1 | ||
Tolerance="0 0 0 0 0 0" | ||
Pen="0.0mil 0" | ||
Page="12000.0mil 8000.0mil" | ||
Layers=" 30" | ||
Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0" | ||
|
||
[Sec_10] | ||
Name[C]="Board Outline" | ||
Name[en]="Board Outline" | ||
Prompt[C]="" | ||
Prompt[en]="" | ||
Device="GERBER_RS274X" | ||
Wheel=".whl" | ||
Rack="" | ||
Scale=1 | ||
Output=".boardoutline.ger" | ||
Flags="0 0 0 1 0 1 1" | ||
Emulate="0 0 0" | ||
Offset="0.0mil 0.0mil" | ||
Sheet=1 | ||
Tolerance="0 0 0 0 0 0" | ||
Pen="0.0mil 0" | ||
Page="12000.0mil 8000.0mil" | ||
Layers=" 20" | ||
Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0" | ||
|
||
[Sec_11] | ||
Name[C]="Excellion Drill" | ||
Name[en]="Excellion Drill" | ||
Prompt[C]="" | ||
Prompt[en]="" | ||
Device="EXCELLON" | ||
Wheel=".whl" | ||
Rack="" | ||
Scale=1 | ||
Output=".drills.xln" | ||
Flags="0 0 0 1 0 1 1" | ||
Emulate="0 0 0" | ||
Offset="0.0mil 0.0mil" | ||
Sheet=1 | ||
Tolerance="0 0 0 0 0 0" | ||
Pen="0.0mil 0" | ||
Page="12000.0mil 8000.0mil" | ||
Layers=" 44 45" | ||
Colors=" 1 2 1 2 1 2 1 2 1 2 1 2 1 2 1 2 6 6 4 8 8 8 8 8 8 8 8 8 8 8 8 8 4 4 1 1 1 1 3 3 1 2 6 8 8 5 8 8 8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 4 2 4 3 6 6 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0" |
Binary file not shown.
72 changes: 72 additions & 0 deletions
72
radio/circuit-board/tc1-1-13-breakout/tc1-1-13-breakout.dru
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Original file line number | Diff line number | Diff line change |
---|---|---|
@@ -0,0 +1,72 @@ | ||
description[en] = <h3>JVB: MODIFIED for metric</h3>\n<b>EAGLE Design Rules for *4* Layer Designs (MLB)</b>\n<p>\nThis Sunstone Circuits 4 Layer .DRU has been set to cover our minimum requirements for our 4 layer MLB products. For questions, comments, suggestions, please contact Sunstone Customer Support:<p><b>Email:</b> mailto:support@sunstone.com<b><br>Phone:</b> 800-228-8198<p> v1.1Mod10/16/07~Layers-core reversal.Distance C/D.Restring%.Supply G\n<p>v1.2Mod12/06/07~Distance C/D to 20mils.<p>v1.3Mod12/12/07~Supply/Annulus Value to 12.5mils<p>1/15/08 SSC-EAGLE-4Lyr_v1.0.0.3~For Release<p>10/03/08 Description Edit<p>\n<i>Attention: Upon running the design check and making modifications, please remember to save any changes before closing the application and sending in your board file to Sunstone Circuits for conversion.<i> | ||
layerSetup = (1+2*15+16) | ||
mtCopper = 0.0178mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0356mm 0.0178mm | ||
mtIsolate = 12mil 28mil 12mil 0.1499mm 0.2007mm 0.1499mm 0.2007mm 0.1499mm 0.2007mm 0.1499mm 0.2007mm 0.1499mm 0.2007mm 0.1499mm 12mil | ||
mdWireWire = 0.2mm | ||
mdWirePad = 0.2mm | ||
mdWireVia = 0.2mm | ||
mdPadPad = 0.2mm | ||
mdPadVia = 0.2mm | ||
mdViaVia = 0.2mm | ||
mdSmdPad = 0.2mm | ||
mdSmdVia = 0.2mm | ||
mdSmdSmd = 0.2mm | ||
mdViaViaSameLayer = 8mil | ||
mnLayersViaInSmd = 2 | ||
mdCopperDimension = 20mil | ||
mdDrill = 16mil | ||
mdSmdStop = 0mil | ||
msWidth = 0.3mm | ||
msDrill = 13mil | ||
msMicroVia = 9.9898mm | ||
msBlindViaRatio = 0.500000 | ||
rvPadTop = 0.250000 | ||
rvPadInner = 0.250000 | ||
rvPadBottom = 0.250000 | ||
rvViaOuter = 0.250000 | ||
rvViaInner = 0.250000 | ||
rvMicroViaOuter = 0.250000 | ||
rvMicroViaInner = 0.250000 | ||
rlMinPadTop = 10mil | ||
rlMaxPadTop = 999mil | ||
rlMinPadInner = 10mil | ||
rlMaxPadInner = 999mil | ||
rlMinPadBottom = 10mil | ||
rlMaxPadBottom = 999mil | ||
rlMinViaOuter = 10mil | ||
rlMaxViaOuter = 999mil | ||
rlMinViaInner = 10mil | ||
rlMaxViaInner = 999mil | ||
rlMinMicroViaOuter = 8mil | ||
rlMaxMicroViaOuter = 999mil | ||
rlMinMicroViaInner = 8mil | ||
rlMaxMicroViaInner = 999mil | ||
psTop = -1 | ||
psBottom = -1 | ||
psFirst = -1 | ||
psElongationLong = 100 | ||
psElongationOffset = 100 | ||
mvStopFrame = 1.000000 | ||
mvCreamFrame = 0.000000 | ||
mlMinStopFrame = 3mil | ||
mlMaxStopFrame = 3mil | ||
mlMinCreamFrame = 0mil | ||
mlMaxCreamFrame = 0mil | ||
mlViaStopLimit = 13mil | ||
srRoundness = 0.000000 | ||
srMinRoundness = 0mil | ||
srMaxRoundness = 0mil | ||
slThermalGap = 0.500000 | ||
slMinThermalGap = 8mil | ||
slMaxThermalGap = 100mil | ||
slAnnulusIsolate = 12.5mil | ||
slThermalIsolate = 8mil | ||
slAnnulusRestring = 0 | ||
slThermalRestring = 1 | ||
slThermalsForVias = 0 | ||
checkGrid = 0 | ||
checkAngle = 1 | ||
checkFont = 1 | ||
checkRestrict = 1 | ||
useDiameter = 31 | ||
maxErrors = 50 |
Binary file not shown.