ramips: add support for Netgear JWNR2010v5

shibajee · Aug 5, 2020 · 85deca0 · 85deca0
1 parent bc9293f
commit 85deca0
Show file tree

Hide file tree

Showing 6 changed files with 156 additions and 0 deletions.
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -301,6 +301,14 @@ mzk-ex750np)
 na930)
 	set_usb_led "$boardname:blue:status"
 	;;
+netgear,jwnr2010-v5)
+	ucidef_set_led_default "power" "power" "$boardname:green:power" "1"
+	ucidef_set_led_switch "lan1" "lan1" "$boardname:green:lan1" "switch0" "0x08"
+	ucidef_set_led_switch "lan2" "lan2" "$boardname:green:lan2" "switch0" "0x04"
+	ucidef_set_led_switch "lan3" "lan3" "$boardname:green:lan3" "switch0" "0x02"
+	ucidef_set_led_switch "lan4" "lan4" "$boardname:green:lan4" "switch0" "0x01"
+	ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x10"
+	;;
 newifi-d1)
 	set_usb_led "$boardname:red:status"
 	;;

diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -33,6 +33,7 @@ ramips_setup_interfaces()
 	case $board in
 	11acnas|\
 	dir-615-h1|\
+	netgear,jwnr2010-v5|\
 	w2914nsv2|\
 	zbt-we2026)
 		ucidef_add_switch "switch0" \
@@ -534,6 +535,7 @@ ramips_setup_macs()
 	tew-691gr)
 		wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 4)" 3)
 		;;
+	netgear,jwnr2010-v5|\
 	tew-692gr)
 		wan_mac=$(macaddr_add "$(mtd_get_mac_binary factory 4)" 1)
 		;;

diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
@@ -38,6 +38,7 @@ get_status_led() {
 	mzk-w300nh2|\
 	nbg-419n|\
 	nbg-419n2|\
+	netgear,jwnr2010-v5|\
 	pwh2004|\
 	r6220|\
 	tplink,c20-v4|\

diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -112,6 +112,7 @@ platform_check_image() {
 	mzk-wdpr|\
 	nbg-419n|\
 	nbg-419n2|\
+	netgear,jwnr2010-v5|\
 	newifi-d1|\
 	d-team,newifi-d2|\
 	nixcore-x1-8M|\

diff --git a/target/linux/ramips/dts/JWNR2010v5.dts b/target/linux/ramips/dts/JWNR2010v5.dts
@@ -0,0 +1,125 @@
+/dts-v1/;
+
+#include "mt7620n.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	compatible = "netgear,jwnr2010-v5", "ralink,mt7620n-soc";
+	model = "Netgear JWNR2010v5";
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led_power: power {
+			label = "jwnr2010-v5:green:power";
+			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+		};
+
+		wan {
+			label = "jwnr2010-v5:green:wan";
+			gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>;
+		};
+
+		wlan {
+			label = "jwnr2010-v5:green:wlan";
+			gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy0radio";
+		};
+
+		lan1 {
+			label = "jwnr2010-v5:green:lan1";
+			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+		};
+
+		lan2 {
+			label = "jwnr2010-v5:green:lan2";
+			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+		};
+
+		lan3 {
+			label = "jwnr2010-v5:green:lan3";
+			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+		};
+
+		lan4 {
+			label = "jwnr2010-v5:green:lan4";
+			gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+
+		reset {
+			label = "reset";
+			gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+};
+
+&gpio2 {
+	status = "okay";
+};
+
+&gpio3 {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+
+	m25p80@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+
+		partition@0 {
+			label = "u-boot";
+			reg = <0x0 0x20000>;
+			read-only;
+		};
+
+		partition@20000 {
+			label = "firmware";
+			reg = <0x20000 0x3c0000>;
+		};
+
+		partition@3e0000 {
+			label = "nvram";
+			reg = <0x3e0000 0x10000>;
+			read-only;
+		};
+
+		factory: partition@3f0000 {
+			label = "factory";
+			reg = <0x3f0000 0x10000>;
+			read-only;
+		};
+	};
+};
+
+&ethernet {
+	mtd-mac-address = <&factory 0x4>;
+	mediatek,portmap = "wllll";
+};
+
+&wmac {
+	ralink,mtd-eeprom = <&factory 0>;
+};
+
+&pinctrl {
+	state_default: pinctrl0 {
+		default {
+			ralink,group = "pa", "ephy", "wled";
+			ralink,function = "gpio";
+		};
+	};
+};
diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk
@@ -401,6 +401,25 @@ define Device/na930
 endef
 TARGET_DEVICES += na930
 
+define Device/netgear_jwnr2010-v5
+  DTS := JWNR2010v5
+  BLOCKSIZE := 4k
+  IMAGE_SIZE := 3840k
+  DEVICE_TITLE := Netgear JWNR2010v5
+  SERCOMM_HWNAME := N300
+  SERCOMM_HWID := ASW
+  SERCOMM_HWVER := A001
+  SERCOMM_SWVER := 0x0040
+  IMAGES += factory.img
+  IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | \
+	pad-rootfs
+  IMAGE/sysupgrade.bin := $$(IMAGE/default) | append-metadata | check-size $$$$(IMAGE_SIZE)
+  IMAGE/factory.img := pad-extra 128k | $$(IMAGE/default) | pad-to $$$$(BLOCKSIZE) | \
+	sercom-footer | pad-to 128 | check-size $$$$(IMAGE_SIZE) | zip $$$$(SERCOMM_HWNAME).bin | \
+	sercom-seal
+endef
+TARGET_DEVICES += netgear_jwnr2010-v5
+
 define Device/oy-0001
   DTS := OY-0001
   IMAGE_SIZE := $(ralink_default_fw_size_16M)