-
Notifications
You must be signed in to change notification settings - Fork 0
Home
shijiang-zhou edited this page Mar 29, 2024
·
11 revisions
Welcome to the 3DD Capture wiki!
- Download 3DD Capture app from App Store
- Launch 3DD Capture after install.
- You will be asked to give the permission to use the camera. Tap OK.
- Read all instructions on the startup screen.
- Tap the button to turn on the camera.
- Select "No Mirror" option if no mirror is attached, or "Mirror Attached" if a mirror is attached.
- If it is the first time to use the app, the calibration will start right away. Otherwise, tap the button to start the calibration manually.
- Place a letter-size paper on a non-white table.
- Tap OK to continue.
- Flip the phone so that it is facing down, center the front camera (not the phone) with the paper.
- Keep the phone in the same orientation as the paper.
- Keep the phone screen parallel to the paper.
- Do not try to look at the phone screen.
- Slowly raise the phone to 12 inches or 30cm high.
- Flip the phone back, tap OK button if it says the calibration is done. If not, the yellow message on screen should explain why.
- Tap the button to turn on the camera if it is not already.
- Select "No Mirror" option if no mirror is attached, or "Mirror Attached" if a mirror is attached.
- Point the camera towards object and center the camera (not the phone) with the object.
- Keep the phone centered with the object, and keep this distance about 12 inches or 30 cm. Do not flip the phone to look at the phone screen.
- Tap the middle area of the screen to capture the 3D image.
- The 3D result will apprear shortly after.
- At the 3D result screen, you can flip, zoom in or zoom out by dragging, pinching inwards, or pinching outwards.
- If no mirror is attached, it is better not to look at screen while capturing the 3D image, just keep the phone centered with the object, and keep this distance about 12 inches or 30 cm.
- Increase the distance if the 3D result appears too small, or decrease the distance if the 3D result is cropped.
- If you really have to look at the phone screen, try to look at the phone screen from the direction of the target object.
Once all aspects of the object have been captured, you can navigate the 3D images using the on-screen buttons.
- To go to the previous 3D image, tap on button.
- To go to the next 3D image, tap on button.
- To delete the 3D image on screen, tap on button.
- To export all 3D images, tap on button.
- To view exported 3D images, tap on button.
If you want to share the 3D images with someone, they need to be exported first. To export all 3D images in a ZIP file:
- Tap on button. List of 3D images saved previously will appear.
- Enter the name for the ZIP file, and tap OK button.
- If you want to delete any previous 3D images, tap on it and then tap on button. This way you can save as the old file name, otherwise you will not be able to save if the same name exists.
You can view captures saved on your phone previously.
- Tap on button. List of 3D images saved previously will appear.
- Tap on the file you want to open. The button will appear, which allows you to do some cleanup.
- Tap on button again.
Any questions, please write to ictime@gmail.com.