homebridge-esp-co2

This plug-in is based on UDP Json.

UDP server for receiving JSON messages from remote sensors on your network, plugin for Homebridge

Installation

1. Install Homebridge using npm install -g homebridge
2. Install this plugin npm install -g shin4299/homebridge-esp-co2
3. Update your configuration file - see below for an example

Configuration

• accessory: "ESPCO2" ---- Require
• name: descriptive name ---- Require
• listen_port: UDP port to listen on for incoming messages ---- No-Require(default 8268)
• temperatureOn: 'true' or 'false' ---- No-Require(default true)
• carbonDioxideSet: Carbon dioxide value for notification   ---- No-Require(default 1200ppm)

Example configuration:

    "accessories": [
        {
            "accessory": "ESPCO2",
            "name": "Bedroom"
        }
    ]

or

    "accessories": [
        {
            "accessory": "ESPCO2",
            "name": "Bedroom",
       			"temperatureOn": false,
      			"carbonDioxideSet": 1000,
            "listen_port": 8268
        }
    ]

ESP Easy Controllers Setting

• Protocol: generic UDP
• Locate Controller: Use IP address
• Controller IP: 192.168.1.100 (Your homebridge server IP)
• Controller Port: 8268
• Controller Subscribe:
• Controller Publish: {"co2_ppm":%val1%, "temperature_c":%val2%}
• Enabled: check

License

MIT