Documentation: path fixes

hid-libusb.c was renamed hid.c long ago but documentation wasn't
updated.

README.txt

@@ -29,7 +29,7 @@ hidraw nodes associated with them.  Keyboards, mice, and some other devices
 which are blacklisted from having hidraw nodes will not work. Fortunately,
 for nearly all the uses of hidraw, this is not a problem.
 
-Linux/FreeBSD/libusb (libusb/hid-libusb.c):
+Linux/FreeBSD/libusb (libusb/hid.c):
 This back-end uses libusb-1.0 to communicate directly to a USB device. This
 back-end will of course not work with Bluetooth devices.
 

linux/README.txt

@@ -1,6 +1,6 @@
 
-There are two implementations of HIDAPI for Linux. One (hid.c) uses the
-Linux hidraw driver, and the other (hid-libusb.c) uses libusb. Which one you
+There are two implementations of HIDAPI for Linux. One (linux/hid.c) uses the
+Linux hidraw driver, and the other (libusb/hid.c) uses libusb. Which one you
 use depends on your application. Complete functionality of the hidraw
 version depends on patches to the Linux kernel which are not currently in
 the mainline. These patches have to do with sending and receiving feature
@@ -9,13 +9,9 @@ device, bypassing any Linux HID driver. The disadvantage of the libusb
 version is that it will only work with USB devices, while the hidraw
 implementation will work with Bluetooth devices as well.
 
-To use HIDAPI, simply drop either hid.c or hid-libusb.c into your
+To use HIDAPI, simply drop either linux/hid.c or libusb/hid.c into your
 application and build using the build parameters in the Makefile.
 
-By default, on Linux, the Makefile in this directory is configured to use
-the libusb implementation. To switch to the hidraw implementation, simply
-change hid-libusb.c to hid.c in the Makefile.
-
 
 Libusb Implementation notes
 ----------------------------

udev/99-hid.rules

@@ -2,7 +2,7 @@
 # to 0666 (world readable/writable) for a specified device on Linux systems.
 
 
-# If you are using the libusb implementation of hidapi (hid-libusb.c), then
+# If you are using the libusb implementation of hidapi (libusb/hid.c), then
 # use something like the following line, substituting the VID and PID with
 # those of your device. Note that for kernels before 2.6.24, you will need
 # to substitute "usb" with "usb_device". It shouldn't hurt to use two lines
@@ -12,8 +12,9 @@
 SUBSYSTEM=="usb", ATTRS{idVendor}=="04d8", ATTRS{idProduct}=="003f", MODE="0666"
 
 
-# If you are using the hidraw implementation, then do something like the
-# following, substituting the VID and PID with your device. Busnum 1 is USB.
+# If you are using the hidraw implementation (linux/hid.c), then do something
+# like the following, substituting the VID and PID with your device. Busnum 1
+# is USB.
 
 # HIDAPI/hidraw
 KERNEL=="hidraw*", ATTRS{busnum}=="1", ATTRS{idVendor}=="04d8", ATTRS{idProduct}=="003f", MODE="0666"