An Ansible Role that configures apcupsd on Proxmox VE. Notifications are sent using Promox built-in notification tool proxmox-mail-forward which will send emails to the address configured for the root user of the PVE node by default.
This role was tested on Proxmox VE 7.2.
None.
Available variables are listed below, along with default values (see defaults/main.yml):
pve_apcupsd_ups_name: ""
pve_apcupsd_ups_cable: usb
pve_apcupsd_ups_type: usb
pve_apcupsd_device: ""
pve_apcupsd_on_battery_delay: "6"
pve_apcupsd_ups_battery_level: "5"
pve_apcupsd_ups_minutes: "3"
pve_apcupsd_nisip: 127.0.0.1
pve_apcupsd_monitored_hosts: []
Default configuration should be enough to configure standard USB APC UPSes and corresponds to the default configuration shipped with apcupsd.
For additionnal information on configuration values for the apcupsd.conf file see the daemon documentation.
The key pve_apcupsd_monitored_hosts allows to configure hosts monitored by multimon and upsstats. Each entry in this list should contain the host address and description:
pve_apcupsd_monitored_hosts:
- address: 192.168.2.2
description: Server1
- address: 192.168.2.3
description: Server2
None.
- hosts: localhost
vars:
pve_apcupsd_ups_name: ""
pve_apcupsd_on_battery_delay: "10"
pve_apcupsd_ups_battery_level: "10"
pve_apcupsd_ups_minutes: "5"
roles:
- simoncaron.pve_apcupsd
MIT
This role was created in 2022 by Simon Caron.