Skip to content

Latest commit

 

History

History
243 lines (179 loc) · 8.47 KB

Logstash.rst

File metadata and controls

243 lines (179 loc) · 8.47 KB
Raw

Logstash

This chapter gives instruction for getting a basic configuration of Logstash working in a SIMP environment.

Logstash

Logstash is an open source tool that provides a means for SIMP implementations to have logs and events collected, searched, and forwarded (filtered or unfiltered) to another host. SIMP comes with three separate but related modules. The modules are:

  • Logstash: Installs the RPMs and configuration needed for log inputs, filters, and outputs.
  • Kibana: Installs the RPMs and configuration needed for the Kibana 3 web interface.
  • Elasticsearch: Installs the RPMs and configuration needed for Elasticsearch.

Warning

The Logstash class is incompatible with the SIMP rsyslog::stock::server class! You cannot enable both of them on the same sever.

Logstash Architecture

The overall model for Logstash is very simple. It takes inputs from various sources, optionally applies filters, and outputs the results to a specified target. It's likely that you can already forward logs to Logstash and output them in a useful format as part of your existing architecture.

Logstash filters can manipulate logs after ingest and before output. Examples of existing filters include fixing logs to split/combine lines, adding fields, normalizing time stamps, and adding GeoIP fields. Depending on the type of log manipulation that is desired, there is likely a filter and associated documentation that already exists.

Logstash SIMP Architecture

Applying the SIMP Logstash, Elasticsearch, and Kibana modules provides an implementation with a functioning log reduction and search capability. Unless scale dictates otherwise, these three modules can easily be applied to a single host.

The intent of providing Logstash in SIMP is to replace the default Rsyslog server with a capability that is easier to search and analyze over time. Once your Logstash server is set up, you simply need to direct your hosts to forward logs to your Logstash server. In a default SIMP configuration, this can be done by setting the $log_server variable in hiera.

Note

SIMP does NOT apply any filters to the logs by default.

It is up to each implementation to define and apply filters that meet their local requirements. While multiple output targets may be defined, SIMP only defines the Elasticsearch output by default. Please see the Elasticsearch Puppet module for details on how to define additional output targets.

SIMP Logstash Fow

Logstash, SIMP, and Security

The provided SIMP modules for Logstash, Elasticsearch, and Kibana have been built with connection security in mind. Overriding these settings could adversely affect the security of the logging infrastructure. The following list describes the security features in place with the default SIMP module settings:

Warning

The native (Java) Elasticsearch connections are not encrypted! This will be remedied in the future as sufficient methods are found.

  • User Name and Password Protection for Kibana: The Kibana web can be exposed to a defined list of hosts. If you are connecting to Kibana from anything other than the localhost, a user name and password is required for authentication. Both LDAP and local database users are supported.
  • Syslog over Stunnel: The default behavior in SIMP is to encrypt syslog traffic over Stunnel. This remains the case with Logstash. Unencrypted traffic is also supported for network devices.
  • Limiting Web Actions: The Kibana module restricts what HTTP commands a user can perform on the Elasticsearch data store. Full POST action must be given to the Logstash nodes and some nodes may require DELETE capabilities. Logstash hosts should be tightly controlled so that administrative users cannot modify data inside of Elasticsearch with carefully crafted commands. This is one reason that we use syslog on the local hosts.

Important

The Puppet modules for Logstash, Kibana, and Elasticsearch contain dozens of variables that may be manipulated. You should read each product's documentation and ensure you understand any setting that is changed from the default SIMP values. Changes can affect both security and functionality of the system.

Logstash Setup

Logstash System Requirements

The storage requirements for Logstash and Elasticsearch vary depending on how long you plan on keeping logs. If you use the settings in ?, then your logs are not being filtered and are being sent to Elasticsearch. When using Elasticsearch, the logs are formatted for Elasticsearch and stored in /var/elasticsearch. You can also configure how many days of data you wish to keep in Elasticsearch (keep_days => '99'). Therefore, you should ensure you have enough space on /var to keep your defined number of days worth of logs.

As you grow your Elasticsearch cluster to handle increasing log loads, you will want to ensure that your keep_days is set to handle your entire cluster appropriately.

Note

You should have at least 4G of memory available on any Elasticsearch node.

Important

You should NOT install Logstash, Elasticsearch, nor Kibana on your Puppet master. There will likely be conflicts with Apache and resource limitations.

Logstash Module Recommended SIMP Setup

The following example manifest can be applied to a single host with a large /var volume and 4GB of memory.

---
# Add these settings to only your Logstash node.

apache::ssl::sslverifyclient: %{hiera('kibana::ssl_verify_client')}

kibana::redirect_web_root: true
kibana::ssl_allowroot: %{hiera('client_nets')}
kibana::ssl_verify_client: 'none'
# You can add more groups under ldap_groups if you want others
# to be able to access your Kibana instance.
#
# Remember, whitespace matters!
#
kibana::method_acl:
  'method':
    'ldap':
      'enable': true
  'limits':
    'users':
      'valid-user': 'defaults'
    'ldap_groups':
      'cn=administrators,ou=Group,dc=your,dc=domain': 'defaults'

logstash::simp::keep_days: '30'

elasticsearch::simp::manage_httpd: 'conf'

classes:
  - 'logstash::simp'
  - 'kibana'

In the case of the Elasticsearch node setup below, it may be better to use a group match to pull your Hiera settings. To do this, you should add the following to a file like /etc/puppet/manifests/nodegroups.pp

if $trusted['certname'] =~ /es\d+\.your\.domain/ {
  $hostgroup = 'elasticsearch'
}

Then, ensure that a file called 'elasticsearch.yaml' is present in the .. only:: not simp_4

/etc/puppet/environments/simp/hieradata/hostgroups/ directory and contains the following

simp_4

/etc/puppet/hieradata/hostgroups/ directory and contains the following

content.

---
# All nodes running elasticsearch in your cluster should use
# these settings.
elasticsearch::simp::cluster_name: 'a_unique_hard_to_guess_name'
# This can be no more than the total number of ES nodes that you
# have in your cluster.
elasticsearch::simp::replicas: '2'
elasticsearch::simp::java_install: true

classes:
  - 'elasticsearch::simp'

Make sure you point your clients to the Logstash server by setting the log_server variable to the fqdn of the Logstash server in hiera. This is further covered in ?.

Using LogStash and ElasticSearch

With the default settings applied, you should be able to connect to port 443 on your Kibana host. If connecting from localhost, you will not be prompted for a password. If you are connecting from an external host, a valid LDAP account with that user being defined in the Kibana Class is needed. The page is SSL protected so use https://<hostname>/kibana

With the web interface up, you now have the ability to search logs.

There are several resources available to help with searching. The Kibana Overview Page and Elasticsearch Guide are a good place to start. You should also visit the main Logstash page to see demonstrations and read their tips for searching logs.

image