Skip to content
A web interface for the RPi + pan-tilt with ServoBlaster
Branch: master
Clone or download
Pull request Compare This branch is 25 commits ahead, 531 commits behind silvanmelchior:master.
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Permalink
Type Name Latest commit message Commit time
Failed to load latest commit information.
bin
etc
www-src
www
README.md
RPi_Cam_Web_Interface_Installer.sh
pic.jpg
pic2.jpg

README.md

Alt text Added a pan-tilt control (moving the sevos by software with ServoBlaster) in the web-interface from https://github.com/silvanmelchior/RPi_Cam_Web_Interface

By default is configured for using GPIO4 and GPIO17. It can be modified if needed by modifiying the up.sh down.sh right.sh left.sh scripts from directory /var/www/

Alt text Depends on ServoBlaster to move the servos, so you should install it first https://github.com/richardghirst/PiBits/tree/master/ServoBlaster

For Raspberry Pi 2 this is the only working version of ServoBlaster I found; https://www.raspberrypi.org/forums/viewtopic.php?p=699651&sid=c399f7fc62b79016f7678a4f73e6c1f4#p699651

Once ServoBlaster is installed and working, just follow the instructions like in the original RPi-Cam-Web-Interface but using this git repository.

sudo apt-get update

sudo apt-get dist-upgrade

sudo rpi-update

git clone https://github.com/skalad/RPi_Cam_Web_Interface_ServoBlaster_pan_tilt

cd RPi_Cam_Web_Interface

chmod u+x RPi_Cam_Web_Interface_Installer.sh

./RPi_Cam_Web_Interface_Installer.sh install

After the setup finishes, you have to restart your RPi. Now just open up any browser on any computer in your network and enter the IP of the RPi as URL.

You can’t perform that action at this time.
You signed in with another tab or window. Reload to refresh your session. You signed out in another tab or window. Reload to refresh your session.