The Clog V2 is a 34-key split keyboard. It has the following features:
- Choc V1 switches
- Wireless only with Seeeduino Xiao BLE controllers
- Pinky clusters (top pinky keys on the sides)
- Splay (4° between middle and ring, 8° between ring and pinky)
- SplitKB puck support for tenting
- EVQWGD001 roller support
The gerber ZIP has everything you'll need to get this printed. You can order from JLC by just uploading that ZIP archive and keeping the default options. I'd suggest removing the order number, otherwise they'll put one on the board somewhere randomly.
| Part Name | Quantity | Notes | Link |
|---|---|---|---|
| PCB | 2 (halves) | Look up hurr hurr | |
| Choc V1 Switches | 34 | https://mkultra.click/choc-switches | |
| Choc Keycaps | 34 | https://mkultra.click/mbk-factory-colors | |
| SMD Diodes | 34 | https://www.aliexpress.com/item/3256802562651339.html | |
| Power Switches | 2 | Technically optional | https://www.digikey.com/en/products/detail/nidec-copal-electronics/CUS-12TB/1124222 |
| Xiao BLE | 2 | Not technically optional | https://www.seeedstudio.com/Seeed-XIAO-BLE-nRF52840-p-5201.html |
| Small LiPo Batteries | 2 | https://www.aliexpress.com/item/2251832610867849.html | |
| Inch of Copper Wire | 1 | Use thin and sheathed | Any hardware store |
| MCU Sockets | 1 strip to chop | Optional, chop into sections of 7 pins | https://www.digikey.com/en/products/detail/mill-max-manufacturing-corp/316-43-164-41-006000/1212147 |
| MCU Socket Pins | 28 | Optional, buy extras, these are slippery | https://www.digikey.com/en/products/detail/mill-max-manufacturing-corp/3320-0-00-15-00-00-03-0/4147392 |
I'd solder the parts in this order:
- Diodes
- Power switches
- MCU sockets/Headers that came with the Xiao's
- MCU pins if you're socketing
- Batteries (To the +ve and -ve terminals)
- The "bodge" wire from the +ve charging pad on the controller to the "Bdg" hole
- Choc switches
