Skip to content

sq5bpf/k5prog

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

31 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

k5prog - Quansheng UV-K5 EEPROM and flash programmer  v0.9
(c) 2023 Jacek Lipkowski <sq5bpf@lipkowski.org>

This program can read and write the EEPROM of Quansheng UV-K5.
It can read/write arbitrary data, and might be useful for making backups of
the configuration, mass programming of radios or reverse engineering of 
the radio configuration. Please note that it is probably possible to break 
your radio by writing a bad configuration to it, so please use at your own 
risk.

Note that this program does not edit the contents of the EEPROM. Use an
external hex editor.


The program can also flash the firmware on the Quansheng UV-K5. This will
flash the raw binary, and not the Quansheng-encrypted firmware files. 
A Quansheng-encrypted firmware can be decrypted using the fw.py script from
here:
https://github.com/fagci/qs-uvk5-firmware-modder
An example decrypted file is provided in k5_flash_test.raw, this is the vendor
2.01.23 firmware without any modifications.
Please use extreme caution, as reprogramming the radioflash can potentially
brick your radio. If unsure, please use the vendor flashing software.

The flashing support in k5prog was used in at least 2 cases to recover radios
which were bricked by flashing firmware using the vendor flasher. I don't know
why this worked, but it did.


To compile, please see the compiling section at the end.


The program is written to (hopefully) run on POSIX systems. Testing was done 
on GNU/Linux, but macOS and Windows under Cygwin should work too. 

For licensing see the file LICENSE.


---- Usage ----

to display help run the program without arguments, or with the -h option. 

The configuration options are:
Quansheng UV-K5 EEPROM programmer v0.8 (c) 2023 Jacek Lipkowski <sq5bpf@lipkowski.org>

cmdline opts:
-f <file>       filename that contains the EEPROM dump (default: k5_eeprom.raw)
-b <file>       filename that contains the raw flash image (default k5_flash.raw)
-Y      increase "I know what I'm doing" value, to enable functionality likely to break the radio
-D      wait for the message from the radio flasher, print it's version
-F      flash firmware, WARNING: this will likely brick your radio!
-M <ver>        Set the firmware major version to <ver> during the flash process (default: *.01.23)
-r      read EEPROM
-w      write EEPROM like the original software does
-W      write most of the EEPROM (but without what I think is calibration data)
-B      write ALL of the EEPROM (the "brick my radio" mode)
-p <port>       device name (default: /dev/ttyUSB0)
-s <speed>      serial speed (default: 38400, the UV-K5 doesn't accept any other speed)
-h      print this help
-v      be verbose, use multiple times for more verbosity


---- Reading/writing the configuration EEPROM ----

For a basic usage use -r to read EEPROM, -w to write EEPROM. The -v option
gives more verbosity.

Read configuration:

sq5bpf@chronos:~/k5prog$ ./k5prog -r -v
Quansheng UV-K5 EEPROM programmer v0.5 (c) 2023 Jacek Lipkowski <sq5bpf@lipkowski.org>

k5_prepare: try 0
******  Connected to firmware version: [k5_2.01.23]
Successfully read EEPROM


The EEPROM contents are written to the file k5_eeprom.raw, this can be
changed with the -f option.


Write configuration from file k5_eeprom.raw:

sq5bpf@chronos:~/chirp/k5prog$ ./k5prog -w -v
Quansheng UV-K5 EEPROM programmer v0.5 (c) 2023 Jacek Lipkowski <sq5bpf@lipkowski.org>

k5_prepare: try 0
******  Connected to firmware version: [k5_2.01.23]
Read file k5_eeprom.raw success
Successfully wrote EEPROM



The -w option writes only the memory blocks which are written by the original
radio software, in the same order. 

The -W option is a bit braver as it writes all memory upto 0x1d00. I _think_
that the radio has calibration data above this address, but of course this is
not certain, because this knowledge is a result of reverse engineering, and not
information from the manufacturer.


The -B option is the "brick my radio" mode. It writes all memory, possibly 
allowing overwriting of calibration data (if there is any) or other data which
may be critical to the proper functioning of your radio. I have used this on
my radio, and it still works but please be extra-careful.

I have written the radio EEPROM with the -W option tens of times, and others 
have too. So far it hasn't produced any bad results. But of course beware.


---- Flashing support ----

The flashing support is for the really brave people who know what they are
doing (hence the -Y flag is needed).

It is possible to read the bootloader version using the -D option. This option
is safe, but needs the -Y value. Put the radio into flash mode and:

./k5prog -Y -D

Quansheng UV-K5 EEPROM programmer v0.5 (c) 2023 Jacek Lipkowski <sq5bpf@lipkowski.org>

"I know what I'm doing" value set to 1
********  k5 command hexdump [obf_len:44 clear_len:36 crc_ok:1 **********
## obfuscated ##

0x00002c |0 |1 |2 |3 |4 |5 |6 |7 |8 |9 |a |b |c |d |e |f |
---------+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+------------
0x000000: ab cd 24 00 0e 69 34 e6 2f 93 0f 46 3d 66 85 0a   ..$..i4./..F=f..   
0x000010: 24 44 16 8f 9a 6c 47 e6 1c bf 3d 70 0f 05 e3 40   $D...lG...=p...@   
0x000020: 27 09 e9 80 16 6c 14 c6 d1 6e dc ba               '....l...n..       
## cleartext ##

0x000024 |0 |1 |2 |3 |4 |5 |6 |7 |8 |9 |a |b |c |d |e |f |
---------+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+------------
0x000000: 18 05 20 00 01 02 02 06 1c 53 50 4a 37 47 ff 0f   .. ......SPJ7G..   
0x000010: 8c 00 53 00 32 2e 30 30 2e 30 36 00 34 0a 00 00   ..S.2.00.06.4...   
0x000020: 00 00 00 20                                       ...                
*****************
Flasher version is: [2.00.06]

The radio can also be flashed with the raw unencrypted binary.
An example binary is provided in the  k5_flash.raw  file (this is the 2.01.23
firmware). The binary file can be specified with the -b option. 
Flashing the radio requires the "I know what I'm doing value" of at least 5.

./k5prog -b k5_flash.raw  -YYYYYY -F                   

Quansheng UV-K5 EEPROM programmer v0.5 (c) 2023 Jacek Lipkowski <sq5bpf@lipkowski.org>

"I know what I'm doing" value set to 6
********  k5 command hexdump [obf_len:44 clear_len:36 crc_ok:1 **********
## obfuscated ##

0x00002c |0 |1 |2 |3 |4 |5 |6 |7 |8 |9 |a |b |c |d |e |f |
---------+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+------------
0x000000: ab cd 24 00 0e 69 34 e6 2f 93 0f 46 3d 66 85 0a   ..$..i4./..F=f..   
0x000010: 24 44 16 8f 9a 6c 47 e6 1c bf 3d 70 0f 05 e3 40   $D...lG...=p...@   
0x000020: 27 09 e9 80 16 6c 14 c6 d1 6e dc ba               '....l...n..       
## cleartext ##

0x000024 |0 |1 |2 |3 |4 |5 |6 |7 |8 |9 |a |b |c |d |e |f |
---------+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+--+------------
0x000000: 18 05 20 00 01 02 02 06 1c 53 50 4a 37 47 ff 0f   .. ......SPJ7G..   
0x000010: 8c 00 53 00 32 2e 30 30 2e 30 36 00 34 0a 00 00   ..S.2.00.06.4...   
0x000020: 00 00 00 20                                       ...                
*****************
Flasher version is: [2.00.06]
*** FLASH at 0x0000 length 0x0100  result=1
*** FLASH at 0x0100 length 0x0100  result=1
*** FLASH at 0x0200 length 0x0100  result=1
*** FLASH at 0x0300 length 0x0100  result=1
etc... until all flash is writtem


It is possible to set the flashed firmware version, which will be later
checked by the bootloader. Currently this is set to *.01.23, which all
known bootloaders will accept, but can be set explicitly to some firmware
version like:

/k5prog  -YYY -F -M '2.01.23' -b firmware.bin


---- Compiling ----

This software was tested to compile using gcc on GNU/Linux systems, using a
simple makefile:

sq5bpf@dellix:~/k5prog-0.1$ make
gcc -O2 k5prog.c -o k5prog

Other POSIX platforms should work also, including macOS. 

The software compiles under Cygwin/Microsoft Windows, but has not been tested.
According to the Cygwin documentation you should use /dev/comX to use port comX
(for example using com6: k5prog.exe -v -r -p /dev/com6)


If you port this to another platform, or do anything interesting with this
software, tell me about it.

---- Other uses ----

The file uvk5_original_eeprom.raw contains an EEPROM downloaded from an UV-K5
radio.  Maybe it can be used to resurrect another radio of the same type 
if it was broken (perhaps by the use of this software :).




---- Protocol ----

The programming protocol used by this software has been reverse engineered
by observing communications between the radio and the original programming
software. It is not a variation of the typical Baofeng-like protocol.


The format of the datagram sent to the radio is:

0xAB 0xCD len 0x00 <data bytes> <2 bytes CRC> 0xDC 0xBA

The length is the length of the data bytes.

The data is protected by a typical CRC-16 xmodem algorithm.
The data bytes and the CRC are obfuscated by xor-in it with an 8-byte 
sequence.

Fortunately the EEPROM data contains a lot of 0xFF and 0x00 bytes, so the XOR
sequence is easy to find by observing the traffic.


The datagram sent from the radio is the same, but the CRC field is set to
0xFFFF. This shows that the CRC is not for data integrity, but for further
obfuscation (same as the XOR).


I intend to publish a further description of the protocol, and the EEPROM
contents, meanwhile the sources can be used as documentation.


VY 73

Jacek / SQ5BPF