Skip to content

Releases: squishy-scsi/hardware

Squishy rev2 mainboard EVT

13 Jun 17:01
@lethalbit lethalbit
rev2-mainboard-evt
This tag was signed with the committer’s verified signature.
lethalbit Aki
GPG key ID: 58B2EF8A70E7F62C
Learn about vigilant mode.
2a035d7
This commit was signed with the committer’s verified signature.
lethalbit Aki
GPG key ID: 58B2EF8A70E7F62C
Learn about vigilant mode.
Compare
Choose a tag to compare
Squishy rev2 mainboard EVT Pre-release
Pre-release

Caution

This is an EVT (Engineering Validation Test) Version of the hardware, DO NOT use it for production

Squishy rev2 mainboard EVT

This is the finalized set of CAD and CAM files for the EVT/R&D version of Squishy rev2's mainboard. As stated in the warning above, this is not production hardware, it is not recommended to use these files, if you can, please wait for a full proper release.

The following file sets are provided:

  • squishy-mainboard-rev2-evt-{top,bottom}-pos.csv - Pick & Place cendroid files for a single mainboard
  • squishy-mainboard-rev2-evt-bom.csv - Bill of Materials for a single mainboard
  • squishy-mainboard-rev2-evt.zip - Generated Gerbers and Drill files for a single mainboard
  • squishy-mainboard-rev2-evt-panel-{top,bottom}-pos.csv - Pick & Place cendtroid files for a panel
  • squishy-mainboard-rev2-evt-panel.zip - Generated Gerbers and Drill files for a panel
  • squishy-manboard-rev2-evt-schematic.pdf - Plotted Schematic for the rev2-evt mainboard

Changes (2024-06-20)

  • Added missing control signals that were identified when work started on the first PHY board

Errata

  • 2024-07-17: Current release has a 48MHz XO specified for the Supervisor, replaced with ASE-32.000MHZ-L-C-T, only BoM needs updating
  • 2024-07-20: Current release has valid pins mixed up to use the supervisor MCU, meaning the FPGA comm channel needs to be bit-banged SPI rather than using the built-in SERCOM peripheral
Assets 10
Loading