This yaml configuration file integrates the Tinkerunity Warp 2 Charger (https://www.warp-charger.com/) into SmarthomeNG (https://www.smarthomeng.de/) by using the integrated MQTT module.
- Place the 'warp_charger.yaml' file into the 'smarthomeNG/items' directory of your installation.
- Make sure you set the MQTT Topic-Präfix value to 'warp_charger' in the Warp Charger MQTT setup webpage - otherwise you need to change all the 'mqtt_topic_in' and 'mqtt_topic_out' attribut values in the warp_charger.yaml file accordingly.
- Restart smarthomeNG service, so items will be accessible as 'sh.warp_charger.' items.
Note: Since the Warp Charger out of the box submits a significant amount of data through MQTT (basically anything that is available at the webpage for status and configuration) and not all of this may be significant in a typical SmarthomeNG environment:
- Not all available MQTT messages are represented in the warp-charger.yaml file (at least not yet)
- In case you may want to exclude subscriptions that are already included in the warp-charger.yaml, the simple way of doing this is to delete (or better comment out) those in your yaml file.