This is a SMD board layout for the amiga pi drive from Maurizio Ramondo http://amigadrive.blogspot.ch/
| Part | Value | Package | Description |
|---|---|---|---|
| BUTTONS | gnd | chg | wrt |
| C1 | 10uF | PANASONIC_B | Electrolytic Capacitor |
| C2 | 100nF | 1206 | Capacitor |
| C3 | 220pf | 1206 | Capacitor |
| "D1 – D5, D7" | SB140 | DO41-10 | Schottky Diode |
| D6 | 1N4148 | SOD-123 | Diode |
| IC1 | 74LS06D | SO14 | "Hex INVERTER, open collector high-voltage output" |
| JP1 | Amiga Floppy Power | 1X04/90 | Pin Header |
| JP2 | Amiga Internal Drive | 2X17 | Pin Header |
| JP3 | Raspberry PI | RPI_P1 | Pin Header |
| LED1 | BLUE | LED3MM | LED |
| R1 – R7 | 1k | 1206 | Resistor |
| "R8, R14, R16, R26, R27" | 4k7 | 1206 | Resistor |
| "R9 – R13, R17, R18" | 2k7 | 1206 | Resistor |
| R15 | 10k | 1206 | Resistor |
| R19 – R25 | 6k8 | 1206 | Resistor |
| R28 | 330 | 1206 | Resistor |
| S1 | SEL1 | DS-01 | Switch |