Add ADC DMA example

Cargo.toml

@@ -142,3 +142,7 @@ required-features = ["stm32l4x1"]
 [[example]]
 name = "lptim_rtic"
 required-features = ["rt", "stm32l4x2"]
+
+[[example]]
+name = "adc_dma"
+required-features = ["rt", "stm32l4x1"]

examples/adc_dma.rs

@@ -0,0 +1,107 @@
+#![no_main]
+#![no_std]
+
+use panic_rtt_target as _;
+use rtt_target::{rprintln, rtt_init_print};
+use stm32l4xx_hal::{
+    adc::{DmaMode, SampleTime, Sequence, ADC},
+    delay::DelayCM,
+    dma::{dma1, Transfer, W},
+    prelude::*,
+    time::Hertz,
+};
+
+use rtic::app;
+
+const SEQUENCE_LEN: usize = 3;
+
+#[app(device = stm32l4xx_hal::stm32, peripherals = true, monotonic = rtic::cyccnt::CYCCNT)]
+const APP: () = {
+    // RTIC app is written in here!
+
+    struct Resources {
+        transfer: Option<Transfer<W, &'static mut [u16; SEQUENCE_LEN], dma1::C1, ADC>>,
+    }
+
+    #[init]
+    fn init(cx: init::Context) -> init::LateResources {
+        let MEMORY = {
+            static mut MEMORY: [u16; SEQUENCE_LEN] = [0u16; SEQUENCE_LEN];
+            unsafe { &mut MEMORY }
+        };
+
+        rtt_init_print!();
+
+        rprintln!("Hello from init!");
+
+        let cp = cx.core;
+        let mut dcb = cp.DCB;
+        let mut dwt = cp.DWT;
+
+        dcb.enable_trace();
+        dwt.enable_cycle_counter();
+
+        let pac = cx.device;
+
+        let mut rcc = pac.RCC.constrain();
+        let mut flash = pac.FLASH.constrain();
+        let mut pwr = pac.PWR.constrain(&mut rcc.apb1r1);
+        let dma_channels = pac.DMA1.split(&mut rcc.ahb1);
+
+        //
+        // Initialize the clocks
+        //
+        let clocks = rcc
+            .cfgr
+            .sysclk(Hertz(80_000_000))
+            .freeze(&mut flash.acr, &mut pwr);
+
+        let mut delay = DelayCM::new(clocks);
+
+        let mut adc = ADC::new(
+            pac.ADC1,
+            pac.ADC_COMMON,
+            &mut rcc.ahb2,
+            &mut rcc.ccipr,
+            &mut delay,
+        );
+
+        let mut temp_pin = adc.enable_temperature();
+
+        let dma1_channel = dma_channels.1;
+
+        adc.configure_sequence(&mut temp_pin, Sequence::One, SampleTime::Cycles12_5);
+        adc.configure_sequence(&mut temp_pin, Sequence::Two, SampleTime::Cycles247_5);
+        adc.configure_sequence(&mut temp_pin, Sequence::Three, SampleTime::Cycles640_5);
+
+        // Heapless boxes also work very well as buffers for DMA transfers
+        let transfer = Transfer::from_adc(adc, dma1_channel, MEMORY, DmaMode::Oneshot, true);
+
+        init::LateResources {
+            transfer: Some(transfer),
+        }
+    }
+
+    #[idle]
+    fn idle(_cx: idle::Context) -> ! {
+        loop {
+            cortex_m::asm::nop();
+        }
+    }
+
+    #[task(binds = DMA1_CH1, resources = [transfer])]
+    fn dma1_interrupt(cx: dma1_interrupt::Context) {
+        let transfer = cx.resources.transfer;
+        if let Some(transfer_val) = transfer.take() {
+            let (buffer, channel, adc) = transfer_val.wait();
+            rprintln!("DMA measurements: {:?}", buffer);
+            *transfer = Some(Transfer::from_adc(
+                adc,
+                channel,
+                buffer,
+                DmaMode::Oneshot,
+                true,
+            ));
+        }
+    }
+};