Contents for recovery sdcard on Nook Tablet
Switch branches/tags
Nothing to show
Clone or download
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Failed to load latest commit information.

 Device configuration for the acclaim (Nook Tablet)

 Copyright (C) 2011 The Android Open-Source Project

 Licensed under the Apache License, Version 2.0 (the "License");
 you may not use this file except in compliance with the License.
 You may obtain a copy of the License at

 Unless required by applicable law or agreed to in writing, software
 distributed under the License is distributed on an "AS IS" BASIS,
 See the License for the specific language governing permissions and
 limitations under the License.

Initial pull and modify from WhistleStop repo as a base.

Other reference bases: android_device_bn_encore, android_device_motorola_targa, android_device_lge_p920.

Instructions on compiling CM7 for Nook Tablet (assuming you have set your cm7 repo and have necessary packages installed):

In your terminal, redirect to your cm7 build directory.

Outputted flashable roms,
  • location, out/target/product/acclaim/
Setting up sdcard,
  • Format micro sdcard with FAT32 LBA Boot (tested with 2GB SanDisk/Kingston microSD)
  • For Windows 7, Use EASEUS Partition Master Home Edition (free) or
  • MiniTool Partition Wizard Home Edition (free)
  • -Format sdcard,
  • -File System: FAT32
  • -Partition Label: Boot
  • -Create As: Primary
  • -Cluster Size: Biggest one, 64KB if available
  • -Apply patch
  • -Right click on Boot partition, Modify > Set status Active
  • -Apply patch again
  • Copy recovery.img from the directory, out/target/product/acclaim/ onto the root of your sdcard
  • Rename recovery.img to boot.img or use the contents here,
  • Copy contents (flashing_boot.img, MLO, and u-boot.bin) onto the root of your sdcard
  • Copy onto the root of your sdcard
  • Power off device (Nook Tablet)
  • insert sdcard to device
  • hold power button for a couple of seconds to power on
  • wait until device boot into recovery
Backup using recovery (If you are coming from stock)
  • At the CWM-based Recovery v5.0.2.8 screen
  • (navigate with volume keys and select with home button)
  • > backup and restore
  • > backup (to restore, use restore)
Installing rom from recovery,
  • (press power button to go back)
  • > install zip from sdcard
  • (navigate with volume keys and select with home button)
  • > choose zip from sdcard
  • > Yes - (wait up to a couple minutes)
  • > wipe data/factory reset (1st time installing)
  • > wipe cache partition (1st time installing)
  • > reboot system now (restart device)
First time booting sequence, Other flashable Files (Did you messed up your Nook Tablet?)
  • (use recovery to flash it. no more sdcard CWM Recovery)
  • Hold Power & “n button” down until the device turns on and off again.
  • Then press Power to turn the device on normally and access the recovery.
  • You can also boot to recovery by issuing command “reboot recovery” in adb or terminal
  • (a backup boot.img if needed to re-flash)
  • DO NOT FLASH it with other rom besides the rom created with this source and kernel.
  • (use it to restore stock recovery.img)
  • (use it to restore bootloader and x-loader)
  • Flash this if all you get is a black screen (no ‘n’ logo screen) when turning your Nook Tablet on.
  • (use it to restore to stock 1.4.2)
  • After restart, it will take up to a couple minutes to setup data and system folder.
  • It’ll be up to a couple of minutes before the setup screen shows up.
  • (use it to restore partition 1-6)
  • You will need to install afterward or a CM7 rom.
  • Click on a file and click open raw to download.
–HD (succulent on XDA)