Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Auto speed and Top Layer with change at height #553

Closed
Zulaner opened this issue Oct 10, 2020 · 4 comments
Closed

Auto speed and Top Layer with change at height #553

Zulaner opened this issue Oct 10, 2020 · 4 comments
Labels
bug Something isn't working as intended fix is live in the last release Please download /build the last release and try to reproduce.

Comments

@Zulaner
Copy link

Zulaner commented Oct 10, 2020

Version

2.2.53 (Retraction calibration edition)

Behavior

when using height change modifying only the TOP Layer count to 1
the entire printing speed is affected
image
image
@Zulaner
Copy link
Author

Zulaner commented Oct 10, 2020

Heart_EKG_Ear_Saver.zip.amf.zip

@supermerill
Copy link
Owner

supermerill commented Oct 10, 2020 •
edited

image

Your layer range is from 0.6mm so it affect everything after 0.6mm (up to 2mm)

I don't really understand what's wrong

@supermerill supermerill added the working as intended unless you prove me wrong. label Oct 10, 2020
@Zulaner
Copy link
Author

Zulaner commented Oct 10, 2020

See the speed...

@supermerill
Copy link
Owner

Ok, that's the gapfill inside the 'rectilinear / monotonous with gapill' that makes the auto-speed go to very low speed (because of very thin extrusion).

@supermerill supermerill added bug Something isn't working as intended and removed working as intended unless you prove me wrong. labels Oct 10, 2020
supermerill pushed a commit that referenced this issue Oct 10, 2020
#553 set extrusions to gapfill for gapfill's infillpatternWGapfill to…
8431ca1 
… not confuse the auto-speed
@supermerill supermerill added the fixed for the next version That means that you should be able to test it in the latest nightly build label Oct 10, 2020
@supermerill supermerill added fix is live in the last release Please download /build the last release and try to reproduce. and removed fixed for the next version That means that you should be able to test it in the latest nightly build labels Oct 22, 2020
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
bug Something isn't working as intended fix is live in the last release Please download /build the last release and try to reproduce.
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
2 participants
@supermerill @Zulaner