-
-
Notifications
You must be signed in to change notification settings - Fork 516
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Adaptive Infill does not work #744
Comments
same problem here, it produce a totally infill free object |
Still doesn't seem to work correctly in this version: https://github.com/supermerill/SuperSlicer/actions/runs/475680459 It does do infill, but it doesn't do the adaptive part. |
I find the same. Both adaptive and support cubic infill just print at a fixed density. |
Appears to be broken in the PrusaSlicer 2.3.0 official as well. No attempt to densify under this internal bridge (support cubic), or the walls (adaptive cubic): :Edit: I had the infill density at 20% for that screenshot. Upping it to 60% shows adaptive behavior for support cubic. Adaptive cubic still doesn't seem to work very well in PS 2.3.0 official: |
Version
2.3.55.1
Operating system type + version
Win 10 19042.662 x64
3D printer brand / version + firmware version (if known)
My own CoreXY design running on a Duet 2 with RRF 3.2b4
Behavior
The adaptive cubic and adaptive support infill settings do not produce any infill. I have tested this with my own profile, and with Prusa's profile with the same results. Testing was done with a 50mm box, generated from SS context menu. I have confirmed that this works on PS 2.3b4.
Project File (.3MF) where problem occurs
Shape-Box.3mf.zip
(rename to .3mf)
The text was updated successfully, but these errors were encountered: