Merge branch 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/…

…mmarek/kbuild

Pull misc kbuild updates from Michal Marek:

 - coccicheck script improvements by Luis Rodriguez and Deepa Dinamani

 - new coccinelle patches by Yann Droneaud and Vaishali Thakkar

 - debian packaging fixes by Wilfried Klaebe, Henning Schild and Marcin
   Mielniczuk

* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  Fix the Debian packaging script on systems with no codename
  builddeb: fix file permissions before packaging
  scripts/coccinelle: require coccinelle >= 1.0.4 on device_node_continue.cocci
  coccicheck: refer to Documentation/coccinelle.txt and wiki
  coccicheck: add support for requring a coccinelle version
  scripts: add Linux .cocciconfig for coccinelle
  coccicheck: replace --very-quiet with --quiet when debugging
  coccicheck: add support for DEBUG_FILE
  coccicheck: enable parmap support
  coccicheck: make SPFLAGS more useful
  coccicheck: move spatch binary check up
  builddeb: really include objtool binary in headers package
  coccinelle: catch krealloc() on devm_*() allocated memory
  coccinelle: recognize more devm_* memory allocation functions
  coccinelle: also catch kzfree() issues
  coccicheck: Allow for overriding spatch flags
  Coccinelle: noderef: Add new rules and correct the old rule

.cocciconfig

@@ -0,0 +1,3 @@
+[spatch]
+	options = --timeout 200
+	options = --use-gitgrep

.gitignore

@@ -67,6 +67,7 @@ Module.symvers
 #
 !.gitignore
 !.mailmap
+!.cocciconfig
 
 #
 # Generated include files

Documentation/coccinelle.txt

@@ -38,6 +38,15 @@ as a regular user, and install it with
 
         sudo make install
 
+ Supplemental documentation
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+For supplemental documentation refer to the wiki:
+
+https://bottest.wiki.kernel.org/coccicheck
+
+The wiki documentation always refers to the linux-next version of the script.
+
  Using Coccinelle on the Linux kernel
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
@@ -94,11 +103,26 @@ To enable verbose messages set the V= variable, for example:
 
    make coccicheck MODE=report V=1
 
+ Coccinelle parallelization
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
 By default, coccicheck tries to run as parallel as possible. To change
 the parallelism, set the J= variable. For example, to run across 4 CPUs:
 
    make coccicheck MODE=report J=4
 
+As of Coccinelle 1.0.2 Coccinelle uses Ocaml parmap for parallelization,
+if support for this is detected you will benefit from parmap parallelization.
+
+When parmap is enabled coccicheck will enable dynamic load balancing by using
+'--chunksize 1' argument, this ensures we keep feeding threads with work
+one by one, so that we avoid the situation where most work gets done by only
+a few threads. With dynamic load balancing, if a thread finishes early we keep
+feeding it more work.
+
+When parmap is enabled, if an error occurs in Coccinelle, this error
+value is propagated back, the return value of the 'make coccicheck'
+captures this return value.
 
  Using Coccinelle with a single semantic patch
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
@@ -142,15 +166,118 @@ semantic patch as shown in the previous section.
 The "report" mode is the default. You can select another one with the
 MODE variable explained above.
 
+ Debugging Coccinelle SmPL patches
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Using coccicheck is best as it provides in the spatch command line
+include options matching the options used when we compile the kernel.
+You can learn what these options are by using V=1, you could then
+manually run Coccinelle with debug options added.
+
+Alternatively you can debug running Coccinelle against SmPL patches
+by asking for stderr to be redirected to stderr, by default stderr
+is redirected to /dev/null, if you'd like to capture stderr you
+can specify the DEBUG_FILE="file.txt" option to coccicheck. For
+instance:
+
+    rm -f cocci.err
+    make coccicheck COCCI=scripts/coccinelle/free/kfree.cocci MODE=report DEBUG_FILE=cocci.err
+    cat cocci.err
+
+You can use SPFLAGS to add debugging flags, for instance you may want to
+add both --profile --show-trying to SPFLAGS when debugging. For instance
+you may want to use:
+
+    rm -f err.log
+    export COCCI=scripts/coccinelle/misc/irqf_oneshot.cocci
+    make coccicheck DEBUG_FILE="err.log" MODE=report SPFLAGS="--profile --show-trying" M=./drivers/mfd/arizona-irq.c
+
+err.log will now have the profiling information, while stdout will
+provide some progress information as Coccinelle moves forward with
+work.
+
+DEBUG_FILE support is only supported when using coccinelle >= 1.2.
+
+ .cocciconfig support
+~~~~~~~~~~~~~~~~~~~~~~
+
+Coccinelle supports reading .cocciconfig for default Coccinelle options that
+should be used every time spatch is spawned, the order of precedence for
+variables for .cocciconfig is as follows:
+
+  o Your current user's home directory is processed first
+  o Your directory from which spatch is called is processed next
+  o The directory provided with the --dir option is processed last, if used
+
+Since coccicheck runs through make, it naturally runs from the kernel
+proper dir, as such the second rule above would be implied for picking up a
+.cocciconfig when using 'make coccicheck'.
+
+'make coccicheck' also supports using M= targets.If you do not supply
+any M= target, it is assumed you want to target the entire kernel.
+The kernel coccicheck script has:
+
+    if [ "$KBUILD_EXTMOD" = "" ] ; then
+        OPTIONS="--dir $srctree $COCCIINCLUDE"
+    else
+        OPTIONS="--dir $KBUILD_EXTMOD $COCCIINCLUDE"
+    fi
+
+KBUILD_EXTMOD is set when an explicit target with M= is used. For both cases
+the spatch --dir argument is used, as such third rule applies when whether M=
+is used or not, and when M= is used the target directory can have its own
+.cocciconfig file. When M= is not passed as an argument to coccicheck the
+target directory is the same as the directory from where spatch was called.
+
+If not using the kernel's coccicheck target, keep the above precedence
+order logic of .cocciconfig reading. If using the kernel's coccicheck target,
+override any of the kernel's .coccicheck's settings using SPFLAGS.
+
+We help Coccinelle when used against Linux with a set of sensible defaults
+options for Linux with our own Linux .cocciconfig. This hints to coccinelle
+git can be used for 'git grep' queries over coccigrep. A timeout of 200
+seconds should suffice for now.
+
+The options picked up by coccinelle when reading a .cocciconfig do not appear
+as arguments to spatch processes running on your system, to confirm what
+options will be used by Coccinelle run:
+
+      spatch --print-options-only
+
+You can override with your own preferred index option by using SPFLAGS. Take
+note that when there are conflicting options Coccinelle takes precedence for
+the last options passed. Using .cocciconfig is possible to use idutils, however
+given the order of precedence followed by Coccinelle, since the kernel now
+carries its own .cocciconfig, you will need to use SPFLAGS to use idutils if
+desired. See below section "Additional flags" for more details on how to use
+idutils.
+
  Additional flags
 ~~~~~~~~~~~~~~~~~~
 
 Additional flags can be passed to spatch through the SPFLAGS
-variable.
+variable. This works as Coccinelle respects the last flags
+given to it when options are in conflict.
 
     make SPFLAGS=--use-glimpse coccicheck
+
+Coccinelle supports idutils as well but requires coccinelle >= 1.0.6.
+When no ID file is specified coccinelle assumes your ID database file
+is in the file .id-utils.index on the top level of the kernel, coccinelle
+carries a script scripts/idutils_index.sh which creates the database with
+
+    mkid -i C --output .id-utils.index
+
+If you have another database filename you can also just symlink with this
+name.
+
     make SPFLAGS=--use-idutils coccicheck
 
+Alternatively you can specify the database filename explicitly, for
+instance:
+
+    make SPFLAGS="--use-idutils /full-path/to/ID" coccicheck
+
 See spatch --help to learn more about spatch options.
 
 Note that the '--use-glimpse' and '--use-idutils' options
@@ -159,6 +286,25 @@ thus active by default. However, by indexing the code with
 one of these tools, and according to the cocci file used,
 spatch could proceed the entire code base more quickly.
 
+ SmPL patch specific options
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+SmPL patches can have their own requirements for options passed
+to Coccinelle. SmPL patch specific options can be provided by
+providing them at the top of the SmPL patch, for instance:
+
+// Options: --no-includes --include-headers
+
+ SmPL patch Coccinelle requirements
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+As Coccinelle features get added some more advanced SmPL patches
+may require newer versions of Coccinelle. If an SmPL patch requires
+at least a version of Coccinelle, this can be specified as follows,
+as an example if requiring at least Coccinelle >= 1.0.5:
+
+// Requires: 1.0.5
+
  Proposing new semantic patches
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 

scripts/coccicheck

@@ -1,14 +1,24 @@
 #!/bin/bash
-
+# Linux kernel coccicheck
+#
+# Read Documentation/coccinelle.txt
 #
 # This script requires at least spatch
 # version 1.0.0-rc11.
-#
 
+DIR="$(dirname $(readlink -f $0))/.."
 SPATCH="`which ${SPATCH:=spatch}`"
 
-trap kill_running SIGTERM SIGINT
-declare -a SPATCH_PID
+if [ ! -x "$SPATCH" ]; then
+    echo 'spatch is part of the Coccinelle project and is available at http://coccinelle.lip6.fr/'
+    exit 1
+fi
+
+SPATCH_VERSION=$($SPATCH --version | head -1 | awk '{print $3}')
+SPATCH_VERSION_NUM=$(echo $SPATCH_VERSION | ${DIR}/scripts/ld-version.sh)
+
+USE_JOBS="no"
+$SPATCH --help | grep "\-\-jobs" > /dev/null && USE_JOBS="yes"
 
 # The verbosity may be set by the environmental parameter V=
 # as for example with 'make V=1 coccicheck'
@@ -25,7 +35,28 @@ else
 	NPROC="$J"
 fi
 
-FLAGS="$SPFLAGS --very-quiet"
+FLAGS="--very-quiet"
+
+# You can use SPFLAGS to append extra arguments to coccicheck or override any
+# heuristics done in this file as Coccinelle accepts the last options when
+# options conflict.
+#
+# A good example for use of SPFLAGS is if you want to debug your cocci script,
+# you can for instance use the following:
+#
+# $ export COCCI=scripts/coccinelle/misc/irqf_oneshot.cocci
+# $ make coccicheck MODE=report DEBUG_FILE="all.err" SPFLAGS="--profile --show-trying" M=./drivers/mfd/arizona-irq.c
+#
+# "--show-trying" should show you what rule is being processed as it goes to
+# stdout, you do not need a debug file for that. The profile output will be
+# be sent to stdout, if you provide a DEBUG_FILE the profiling data can be
+# inspected there.
+#
+# --profile will not output if --very-quiet is used, so avoid it.
+echo $SPFLAGS | egrep -e "--profile|--show-trying" 2>&1 > /dev/null
+if [ $? -eq 0 ]; then
+	FLAGS="--quiet"
+fi
 
 # spatch only allows include directories with the syntax "-I include"
 # while gcc also allows "-Iinclude" and "-include include"
@@ -51,9 +82,14 @@ if [ "$KBUILD_EXTMOD" != "" ] ; then
     OPTIONS="--patch $srctree $OPTIONS"
 fi
 
-if [ ! -x "$SPATCH" ]; then
-    echo 'spatch is part of the Coccinelle project and is available at http://coccinelle.lip6.fr/'
-    exit 1
+# You can override by using SPFLAGS
+if [ "$USE_JOBS" = "no" ]; then
+	trap kill_running SIGTERM SIGINT
+	declare -a SPATCH_PID
+elif [ "$NPROC" != "1" ]; then
+	# Using 0 should work as well, refer to _SC_NPROCESSORS_ONLN use on
+	# https://github.com/rdicosmo/parmap/blob/master/setcore_stubs.c
+	OPTIONS="$OPTIONS --jobs $NPROC --chunksize 1"
 fi
 
 if [ "$MODE" = "" ] ; then
@@ -72,7 +108,7 @@ if [ "$MODE" = "chain" ] ; then
 	echo 'All available modes will be tried (in that order): patch, report, context, org'
     fi
 elif [ "$MODE" = "report" -o "$MODE" = "org" ] ; then
-    FLAGS="$FLAGS --no-show-diff"
+    FLAGS="--no-show-diff $FLAGS"
 fi
 
 if [ "$ONLINE" = "0" ] ; then
@@ -82,7 +118,26 @@ if [ "$ONLINE" = "0" ] ; then
     echo ''
 fi
 
-run_cmd() {
+run_cmd_parmap() {
+	if [ $VERBOSE -ne 0 ] ; then
+		echo "Running ($NPROC in parallel): $@"
+	fi
+	if [ "$DEBUG_FILE" != "/dev/null" -a "$DEBUG_FILE" != "" ]; then
+		if [ -f $DEBUG_FILE ]; then
+			echo "Debug file $DEBUG_FILE exists, bailing"
+			exit
+		fi
+	else
+		DEBUG_FILE="/dev/null"
+	fi
+	$@ 2>$DEBUG_FILE
+	if [[ $? -ne 0 ]]; then
+		echo "coccicheck failed"
+		exit $?
+	fi
+}
+
+run_cmd_old() {
 	local i
 	if [ $VERBOSE -ne 0 ] ; then
 		echo "Running ($NPROC in parallel): $@"
@@ -97,6 +152,14 @@ run_cmd() {
 	wait
 }
 
+run_cmd() {
+	if [ "$USE_JOBS" = "yes" ]; then
+		run_cmd_parmap $@
+	else
+		run_cmd_old $@
+	fi
+}
+
 kill_running() {
 	for i in $(seq 0 $(( NPROC - 1 )) ); do
 		if [ $VERBOSE -eq 2 ] ; then
@@ -106,10 +169,23 @@ kill_running() {
 	done
 }
 
+# You can override heuristics with SPFLAGS, these must always go last
+OPTIONS="$OPTIONS $SPFLAGS"
+
 coccinelle () {
     COCCI="$1"
 
     OPT=`grep "Option" $COCCI | cut -d':' -f2`
+    REQ=`grep "Requires" $COCCI | cut -d':' -f2 | sed "s| ||"`
+    REQ_NUM=$(echo $REQ | ${DIR}/scripts/ld-version.sh)
+    if [ "$REQ_NUM" != "0" ] ; then
+	    if [ "$SPATCH_VERSION_NUM" -lt "$REQ_NUM" ] ; then
+		    echo "Skipping coccinele SmPL patch: $COCCI"
+		    echo "You have coccinelle:           $SPATCH_VERSION"
+		    echo "This SmPL patch requires:      $REQ"
+		    return
+	    fi
+    fi
 
 #   The option '--parse-cocci' can be used to syntactically check the SmPL files.
 #

scripts/coccinelle/free/devm_free.cocci

@@ -29,7 +29,23 @@ expression x;
 @@
 
 (
+ x = devm_kmalloc(...)
+|
+ x = devm_kvasprintf(...)
+|
+ x = devm_kasprintf(...)
+|
  x = devm_kzalloc(...)
+|
+ x = devm_kmalloc_array(...)
+|
+ x = devm_kcalloc(...)
+|
+ x = devm_kstrdup(...)
+|
+ x = devm_kmemdup(...)
+|
+ x = devm_get_free_pages(...)
 |
  x = devm_request_irq(...)
 |
@@ -48,6 +64,16 @@ position p;
 (
 * kfree@p(x)
 |
+* kzfree@p(x)
+|
+* __krealloc@p(x, ...)
+|
+* krealloc@p(x, ...)
+|
+* free_pages@p(x, ...)
+|
+* free_page@p(x)
+|
 * free_irq@p(x)
 |
 * iounmap@p(x)