g2core-api

g2core-api is a node library module (g2core-api) and a bundled commmand-line utility (g2) to abstract communications and control of a device running Synthetos g2core firmware. Written and maintained by the Synthetos core team.

Usage as a library

// Require "g2core-api" to get access to the G2coreAPI class
const G2coreAPI = require("g2core-api");

// Then create a g2core_api object, we'll call it 'g2' in our examples
var g2 = new G2coreAPI();

Now you have a g2 object, you need to tell it to connect to a g2core device, then you can interact with that device.

See ./docs/ReadMe.adoc for more documentation

Usage as a command line utility

Note: This is for advanced users and is experimental.

First install the g2core-api npm globally, so the g2 command will be in your path:

  # NOTE: You may need to use sudo or log in as root
  npm install -g g2core-api

Now you can just execute the g2 command to get a full "terminal" experience to g2core device.

Or, if you have already g2core-api installed and in your local node_modules, you can refer to it as node_modules/.bin/g2 instead.

If there is only one g2core device attached over USB, then you don't need to provide any more parameters:

  my_host$ g2
  Pos: X=0.00 Y=0.00 Z=0.00 A=0.00 Vel:0.00 (Ended)
  g2core# g0x10
  Pos: X=10.00 Y=0.00 Z=0.00 A=0.00 Vel:0.00 (Stop)
  g2core# ^C

Note: Use Ctrl-C to exit.

To send a file with the g2 utility, simply pass the filename of a gcode file, and it'll give you interactive progress bar:

  my_host$ g2 my_awesome_project.gcode
  Found command port: '/dev/cu.usbmodem14521' with data port '/dev/cu.usbmodem14523'.
  g2core# Opening file 'my_awesome_project.gcode' for streaming.
  Progress |=========================================================______|  91%

If you wish to keep a log of the interaction between the g2core and the g2 utility, then add the -L option to make a log file next to the gcode filename with .log added to the name, or -g LOGFILE parameter to have it save the log in LOGFILE.

  my_host$ g2 my_awesome_project.gcode -L
  Found command port: '/dev/cu.usbmodem14521' with data port '/dev/cu.usbmodem14523'.
  Opening file 'my_awesome_project.gcode' for streaming.
  Progress |=========================================================______|  91%

Note: The g2 command line utility is still a little rough around the edges. It's still in active development, so update often!

g2(1) usage

Usage: g2 [gcode] [options]

gcode     Gcode file to run

Options:
   -p PORT, --port PORT        Name of serial port. Use -l to see the available
                                  ports. If omitted then it will attempt to
                                  auto-detect a g2core device over USB.
   -d PORT, --dataport PORT    Name of data-only serial port (optional).
                                  Use -l to see the available ports.
   -L                          Make or add to a a log file next to the gcode
                                  file with '.log' added to the filename.
   -g LOGFILE, --log LOGFILE   Log to LOGFILE.
                                  The last -L or -g will be honored.
   -l, --list                  List the available ports that can be detected.
                                  Note that this only lists USB devices.
   -v                          Raise the verbosity level of the command line.
                                  (Does not effect logging to file, which is
                                  always at full verbosity.)