2.1.0

Display protocol support of the "Soyosource with display" version added.

Please use the esp8266-display-display-version-example.yaml if your display is broken and you would like to attach a ESP8266 instead to monitor and/or change the inverter settings. A opto-coupler between the internal display port and the ESP is recommended!

2.0.0

This is a major release because it introduces a breaking change. Please update your configuration:

1. The soyosource_virtual_meter.operation_mode_id configuration option is called soyosource_virtual_meter.operation_status_id now.
2. The sensor.operation_mode_id sensor is called sensor.operation_status_id now.
3. The text_sensor.operation_mode is called text_sensor.operation_status now.

1.2.0

Bump component version

1.1.0

Feature complete Soyosource GTN WiFi version support added. All inverter settings can be controlled! 🎉

Please use the esp8266-display-example.yaml if you want to use a generic ESP8266 plus a level shifter (3.3 -> 5V) to interface the inverter via the TTL-WIFI port. If you want to convert your WiFi dongle to the alternative firmware please flash esp8266-wifi-dongle-example.yaml to your dongle. Don't forget to backup the stock firmware. You can find some details about the WiFi dongle here.

1.0.0

Disable the `inactivity_timeout` if set to 0s