Skip to content

HTTPS clone URL

Subversion checkout URL

You can clone with
or
.
Download ZIP
Branch: development
Fetching contributors…

Cannot retrieve contributors at this time

executable file 65 lines (42 sloc) 1.874 kB
# put your *.o targets here, make should handle the rest!
SRCS = main.c system_stm32f0xx.c
# all the files will be generated with this name (main.elf, main.bin, main.hex, etc)
PROJ_NAME=main
# Location of the Libraries folder from the STM32F0xx Standard Peripheral Library
STD_PERIPH_LIB=Libraries
# location of OpenOCD Board .cfg files (only used with 'make program')
OPENOCD_BOARD_DIR=/usr/share/openocd/scripts/board
# Configuration (cfg) file containing programming directives for OpenOCD
OPENOCD_PROC_FILE=extra/stm32f0-openocd.cfg
# that's it, no need to change anything below this line!
###################################################
CC=arm-none-eabi-gcc
OBJCOPY=arm-none-eabi-objcopy
CFLAGS = -g -std=c99 -O2 -Wall -TDevice/ARMCMx.ld
CFLAGS += -mlittle-endian -mthumb -mcpu=cortex-m0 -march=armv6s-m
###################################################
vpath %.c src
vpath %.a $(STD_PERIPH_LIB)
ROOT=$(shell pwd)
CFLAGS += -Iinc -I$(STD_PERIPH_LIB) -I$(STD_PERIPH_LIB)/CMSIS/Device/ST/STM32F0xx/Include
CFLAGS += -I$(STD_PERIPH_LIB)/CMSIS/Include -I$(STD_PERIPH_LIB)/STM32F0xx_StdPeriph_Driver/inc
CFLAGS += -include$(STD_PERIPH_LIB)/stm32f0xx_conf.h
SRCS += Device/startup_ARMCM0.s #Device/startup_stm32f0xx.s # add startup file to build
OBJS = $(SRCS:.c=.o)
###################################################
.PHONY: lib proj
all: lib proj
lib:
$(MAKE) -C $(STD_PERIPH_LIB)
proj: $(PROJ_NAME).elf
$(PROJ_NAME).elf: $(SRCS)
$(CC) $(CFLAGS) $^ -o $@ -L$(STD_PERIPH_LIB) -lstm32f0
$(OBJCOPY) -O ihex $(PROJ_NAME).elf $(PROJ_NAME).hex
$(OBJCOPY) -O binary $(PROJ_NAME).elf $(PROJ_NAME).bin
program: $(PROJ_NAME).bin
openocd -f $(OPENOCD_BOARD_DIR)/stm32f0discovery.cfg -f $(OPENOCD_PROC_FILE) -c "stm_flash `pwd`/$(PROJ_NAME).bin" -c shutdown
clean:
rm -f *.o
rm -f $(PROJ_NAME).elf
rm -f $(PROJ_NAME).hex
rm -f $(PROJ_NAME).bin
Jump to Line
Something went wrong with that request. Please try again.