Add option to remove some non-JSON MQTT topics

README.md

@@ -122,6 +122,7 @@ In a browser navigate to the IP address assigned to the ESP32.
 - Restart on disconnect: Enable to restart the Nuki Hub after 60 seconds without a connection to a network.
 - Enable MQTT logging: Enable to fill the maintenance/log MQTT topic with debug log information.
 - Check for Firmware Updates every 24h: Enable to allow the Nuki Hub to check the latest release of the Nuki Hub firmware on boot and every 24 hours. Requires the Nuki Hub to be able to connect to github.com. The latest version will be published to MQTT and will be visible on the main page of the Web Configurator.
+- Disable some extraneous non-JSON topics: Enable to not publish non-JSON keypad and config MQTT topics.
 
 #### IP Address assignment
 
@@ -263,6 +264,8 @@ In a browser navigate to the IP address assigned to the ESP32.
 - battery/maxTurnCurrent: The highest current of the turn motor during the last lock action (A) (Lock only).
 - battery/lockDistance: The total distance during the last lock action in centidegrees (Lock only).
 - battery/keypadCritical: 1 if the battery level of a connected keypad is critical, otherwise 0.
+- battery/basicJson: The current battery state (critical, charging, level and keypad critical) of the Nuki Lock/Opener as JSON data.
+- battery/advancedJson: : The current battery state (critical, batteryDrain, batteryVoltage, lockAction, startVoltage, lowestVoltage, lockDistance, startTemperature, maxTurnCurrent and batteryResistance) of the Nuki Lock/Opener as JSON data.
 
 ### Keypad
 

platformio.ini

@@ -66,7 +66,7 @@ board = esp32dev
 build_flags =
 	${env.build_flags}
     -DCORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG
-	-DCONFIG_NIMBLE_CPP_LOG_LEVEL=4
+	-DCONFIG_NIMBLE_CPP_LOG_LEVEL=0
     -DDEBUG_NUKIHUB
 	-DDEBUG_SENSE_NUKI
 	-DDEBUG_NUKI_COMMAND
@@ -80,7 +80,7 @@ board = esp32-s3-devkitc-1
 build_flags =
 	${env.build_flags}
     -DCORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG
-	-DCONFIG_NIMBLE_CPP_LOG_LEVEL=4
+	-DCONFIG_NIMBLE_CPP_LOG_LEVEL=0
     -DDEBUG_NUKIHUB
 	-DDEBUG_SENSE_NUKI
 	-DDEBUG_NUKI_COMMAND
@@ -94,7 +94,7 @@ board = esp32-c3-devkitc-02
 build_flags =
 	${env.build_flags}
     -DCORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG
-	-DCONFIG_NIMBLE_CPP_LOG_LEVEL=4
+	-DCONFIG_NIMBLE_CPP_LOG_LEVEL=0
     -DDEBUG_NUKIHUB
 	-DDEBUG_SENSE_NUKI
 	-DDEBUG_NUKI_COMMAND
@@ -110,7 +110,7 @@ build_flags =
 	${env.build_flags}
     -DFRAMEWORK_ARDUINO_SOLO1
     -DCORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG
-	-DCONFIG_NIMBLE_CPP_LOG_LEVEL=4
+	-DCONFIG_NIMBLE_CPP_LOG_LEVEL=0
     -DDEBUG_NUKIHUB
 	-DDEBUG_SENSE_NUKI
 	-DDEBUG_NUKI_COMMAND

src/MqttTopics.h

@@ -48,6 +48,8 @@
 #define mqtt_topic_battery_max_turn_current "/battery/maxTurnCurrent"
 #define mqtt_topic_battery_lock_distance "/battery/lockDistance"
 #define mqtt_topic_battery_keypad_critical "/battery/keypadCritical"
+#define mqtt_topic_battery_basic_json "/battery/basicJson"
+#define mqtt_topic_battery_advanced_json "/battery/advancedJson"
 
 #define mqtt_topic_keypad "/keypad"
 #define mqtt_topic_keypad_command_action "/keypad/command/action"

src/Network.cpp

@@ -264,13 +264,13 @@ void Network::initialize()
 bool Network::update()
 {
     unsigned long ts = millis();
-    
+
     if(ts > 120000 && ts < 125000 && _preferences->getInt(preference_bootloop_counter, 0) > 0)
     {
         _preferences->putInt(preference_bootloop_counter, 0);
         Log->println(F("Bootloop counter reset"));
     }
-    
+
     _device->update();
 
     if(!_mqttEnabled)
@@ -806,14 +806,15 @@ void Network::publishHASSConfig(char* deviceType, const char* baseTopic, char* n
                      "Battery low",
                      name,
                      baseTopic,
-                     String("~") + mqtt_topic_battery_critical,
+                     String("~") + mqtt_topic_battery_basic_json,
                      deviceType,
                      "battery",
                      "",
                      "diagnostic",
                      "",
                      {{(char*)"pl_on", (char*)"1"},
-                      {(char*)"pl_off", (char*)"0"}});
+                      {(char*)"pl_off", (char*)"0"},
+                      {(char*)"val_tpl", (char*)"{{value_json.critical}}" }});
 
     // Battery voltage
     publishHassTopic("sensor",
@@ -823,13 +824,14 @@ void Network::publishHASSConfig(char* deviceType, const char* baseTopic, char* n
                      "Battery voltage",
                      name,
                      baseTopic,
-                     String("~") + mqtt_topic_battery_voltage,
+                     String("~") + mqtt_topic_battery_advanced_json,
                      deviceType,
                      "voltage",
                      "measurement",
                      "diagnostic",
                      "",
-                     { {(char*)"unit_of_meas", (char*)"V"} });
+                     { {(char*)"unit_of_meas", (char*)"V"},
+                       {(char*)"val_tpl", (char*)"{{value_json.level}}" }});
 
     // Trigger
     publishHassTopic("sensor",
@@ -935,7 +937,7 @@ void Network::publishHASSConfig(char* deviceType, const char* baseTopic, char* n
                      "",
                      { { (char*)"en", (char*)"true" },
                        {(char*)"ic", (char*)"mdi:counter"}});
-                       
+
     // Nuki Hub build
     publishHassTopic("sensor",
                      "nuki_hub_build",
@@ -1333,13 +1335,14 @@ void Network::publishHASSConfigAdditionalLockEntities(char *deviceType, const ch
                      "Battery level",
                      name,
                      baseTopic,
-                     String("~") + mqtt_topic_battery_level,
+                     String("~") + mqtt_topic_battery_basic_json,
                      deviceType,
                      "battery",
                      "measurement",
                      "diagnostic",
                      "",
-                     { {(char*)"unit_of_meas", (char*)"%"} });
+                     { {(char*)"unit_of_meas", (char*)"%"},
+                       {(char*)"val_tpl", (char*)"{{value_json.level}}" }});
 
     if((int)basicLockConfigAclPrefs[7] == 1)
     {
@@ -2298,7 +2301,7 @@ void Network::publishHASSConfigAdditionalOpenerEntities(char *deviceType, const
                      "",
                      {{(char*)"pl_on", (char*)"ring"},
                       {(char*)"pl_off", (char*)"standby"}});
-  
+
     JsonDocument json;
     json = createHassJson(uidString, "_ring_event", "Ring", name, baseTopic, String("~") + mqtt_topic_lock_ring, deviceType, "doorbell", "", "", "", {{(char*)"val_tpl", (char*)"{ \"event_type\": \"{{ value }}\" }"}});
     json["event_types"][0] = "ring";
@@ -3032,14 +3035,15 @@ void Network::publishHASSConfigKeypad(char *deviceType, const char *baseTopic, c
                          "Keypad battery low",
                          name,
                          baseTopic,
-                         String("~") + mqtt_topic_battery_keypad_critical,
+                         String("~") + mqtt_topic_battery_basic_json,
                          deviceType,
                          "battery",
                          "",
                          "diagnostic",
                          "",
                          {{(char*)"pl_on", (char*)"1"},
-                          {(char*)"pl_off", (char*)"0"}});
+                          {(char*)"pl_off", (char*)"0"},
+                          {(char*)"val_tpl", (char*)"{{value_json.keypadCritical}}" }});
 
     // Query Keypad
     publishHassTopic("button",
@@ -3152,6 +3156,18 @@ void Network::removeHassTopic(const String& mqttDeviceType, const String& mqttDe
     }
 }
 
+void Network::removeTopic(const String& mqttPath, const String& mqttTopic)
+{
+    String path = mqttPath;
+    path.concat(mqttTopic);
+   _device->mqttPublish(path.c_str(), MQTT_QOS_LEVEL, true, "");
+
+    #ifdef DEBUG_NUKIHUB
+    Log->print(F("Removing MQTT topic: "));
+    Log->println(path.c_str());
+    #endif
+}
+
 
 void Network::removeHASSConfig(char* uidString)
 {

src/Network.h

@@ -55,6 +55,7 @@ class Network
     void publishHASSWifiRssiConfig(char* deviceType, const char* baseTopic, char* name, char* uidString);
     void removeHASSConfig(char* uidString);
     void removeHASSConfigTopic(char* deviceType, char* name, char* uidString);
+    void removeTopic(const String& mqttPath, const String& mqttTopic);
     void batteryTypeToString(const Nuki::BatteryType battype, char* str);
     void advertisingModeToString(const Nuki::AdvertisingMode advmode, char* str);
     void timeZoneIdToString(const Nuki::TimeZoneId timeZoneId, char* str);