-- under construction --
SMD (1206 size) version
| pcs | part | link |
|---|---|---|
| 1 | 470k 1/4w Resistor | link |
| 1 | 220k 1/4w Resistor | link |
| 1 | 4.7k 1/4w Resistor | link |
Thru hole version
| pcs | part | link |
|---|---|---|
| 1 | 470k 1/4w Resistor | link |
| 1 | 220k 1/4w Resistor | link |
| 1 | 4.7k 1/4w Resistor | link |
Generic parts to combine with SMD or Thru hole version
| pcs | part | link |
|---|---|---|
| 1 | DS18b20 | link |
| 1 | Wemos D1 Mini | link |
| 1 | MPU-5060 Gyro | link |
| 1 | TP4056 Li-On charger 5v1a | link |
| 1 | 18650 Li-On battery ~2200mah | link |
| 1 | 18650 Li-On Holder | link |
| 1 | 3-pin OnOff button ("Toy button") | link |
| 3 | 8-pin 2.54mm (male) | link |
| 4 | 1-pin 2.54mm (male) | link |
| 2 | 8-pin 2.54mm (female) | link |
| 1 | Anti-vibration M3 Sponge | link |
| 1 | XL BIG PET Micro Geocaching container | link |
- Flash the firmware to your Wemos (how to)
- Solder the 2x8 female pins
- Remove the 5v regulator beside the USB input
End result after soldering the 2x8 female pins
- Remove the LED diod (blue led)
- Solder the 8 male pins to it, the MPU-6050 upside should be facing down to the MRTEEL PCB backside.
