-
Notifications
You must be signed in to change notification settings - Fork 39
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
One touch blinkers not working if license plate light broken #198
Comments
Sorry for the lag! Are you sure this was related? It doesn't totally makes sense that one would cause the other. Typically, disabling Parking Lights helps the Comfort Blinkers work consistently... Thanks! |
Hi! No worries. Yes, I am pretty shure! I never use Parking Lights, so I did not change any of the configuration. The comfort blinkers stopped behaving normal the moment, the bulb went out and kept this way until I replaced it. Then immediatley worked again. It is an E39 with MID and the "advanced" Cluster, showing you the information that a bulb broke as text (in German something like "Kennzeichenleuchte defekt"). I wondered if this could be some kind of diagnosis message confusing the BlueBus? |
What comes to mind is that the bitmap of bulbs engaged may be different when a bulb is out. Would you remind removing a bulb and following this process? https://github.com/tedsalmon/BlueBus/wiki/Gathering-a-Log I would then just like for you to engage the blinkers in each direction once. Then, another log with working bulbs would be amazing as well! In my own E46s, I cannot replicate this problem. Thanks! |
Will do! But it will take some time, the E39 lives currently in the garage for some repairs :D |
I have an e39 and something is wrong with the wiring to the lic plate lights. I also have this issue where the soft touch blinker won't stop. I need to use the opposite signal and then turn it off. Its not always the case, seems it depends on the boot sequence. |
I've had the same blinker issue surface on my e85. I haven't identified a bulb outage or start-up sequence that's present when the blinker issue occurs, but the issue does appear intermittent. One time, I noticed that the streaming song wasn't the song metadata displayed on the radio interface, so I thought the blinker issue might've been related to a communication issue (delay). I haven't driven the e85 enough to establish a consistent pattern/behavior. |
If anyone with a broken license plate could grab a log, that would be amazing :) @dferguson08 -- Are you on Firmware 1.3.4? |
Hi Ted, hi all!
I recently noticed an interesting behavior: one of the bulbs of the license plate illumination went out, resulting in the one touch blinker function being broken. Broken means: on one touch, blinkers start blinking in the correct direction, but never stops. To stop it, you have to do a "fixed" (so no one touch) blinking in die other direction.
This has been observed in a 2001 E39 with MID.
The text was updated successfully, but these errors were encountered: