https://habr.com/ru/post/342310/
This role will install on Debian system
It's just an automation for this https://pve.proxmox.com/wiki/Install_Proxmox_VE_on_Debian_Stretch and some additionals to make system usable(Configure journald,chronyd) It was writed to be applicable to all versions of Debian and Proxmox(but I haven't tested it :) ). You can override defaults in your playbook to use other versions: - debian_version - debian_repo - pve_repo_keyurl - pve_repo_keyring
At first role will do all from https://pve.proxmox.com/wiki/Install_Proxmox_VE_on_Debian_Stretch excluding installation of open-iscsi. I have excluded package open-iscsi from installation because I don't use it and it shows warnings without configuring.
During performing tasks role will configure bridge for VMs(default is vmbr0) using bridge-utils. You can easly reconfigure it somehow else by modifying templates/interfaces.j2
Ansible (tested with 2.3.1.0) Python (tested with 2.7.5)
A description of the settable variables for this role should go here, including any variables that are in defaults/main.yml, vars/main.yml, and any variables that can/should be set via parameters to the role. Any variables that are read from other roles and/or the global scope (ie. hostvars, group vars, etc.) should be mentioned here as well.
defaults/main.yml:
ntp_pool: pool.ntp.org # Pool of ntp-servers
timezone: Europe/Moscow # Default timezone
debian_version: stretch # Default release
debian_repo: "http://mirror.yandex.ru/debian/" # Default repo address
add_pve-no-subscription: True # Add pve-no-subscription repository
disable_pve-enterprise: True # Disable commercial repo
pve_repo_keyurl # repo key url
pve_repo_keyring # gpg keyring
playbook vars( must be declared ):
proxmox_ip # ip address for new instance of Proxmox
proxmox_mask # network mask
proxmox_gateway # default gateway
proxmox_physnet # physical network for bridge (e.g. eth0)
proxmox_bridge # name of the virtual bridge (e.g. vmbr0)
proxmox_hostname_fdqn # fqdn for new Proxmox
A list of other roles hosted on Galaxy should go here, plus any details in regards to parameters that may need to be set for other roles, or variables that are used from other roles.
---
- hosts: proxmox_target
gather_facts: true
vars:
- proxmox_physnet: eth0
- proxmox_bridge: vmbr0
- proxmox_ip: 192.168.102.51
- proxmox_mask: 255.255.255.0
- proxmox_gateway: 192.168.102.1
- proxmox_hostname_fdqn: proxmox.testlab.lan
roles:
- tenhishadow.pve_on_debian
...GPL v 3.0