- RM Pro / RM2 / RM3 mini IR/RF controllers (device_type = 'rm')
- SP1/SP2 smart plugs (device_type = 'sp1' or 'sp2')
- A1 sensor (device_type = 'a1')
- MP1 power strip (device_type = 'mp1')
- Dooya DT360E curtain motor (device_type = 'dooya')
- BG1 BG smart socket (device_type = 'bg1')
Clone broadlink-mqtt repository using
git clone https://github.com/eschava/broadlink-mqtt.git
or download and unpack latest archive from
https://github.com/eschava/broadlink-mqtt/archive/master.zip
Also need to install required Python modules using
pip install -r requirements.txt
All configurable parameters are present in mqtt.conf file. But there is also custom.conf file. Changes from custom.conf overrides mqtt.conf and it's better to put changed configuration parameters there, to avoid conflicts while updating branch from repository.
Recorded commands are saved under the commands/ folder
Macros are saved under the macros/ folder
Usually broadlink-mqtt works with single Broadlink device only, but there is an experimental feature to support several devices connected to the same network.
Configuration parameters:
device_type = 'multiple_lookup'
mqtt_multiple_subprefix_format = '{type}_{mac_nic}/'
Second parameter defines format of sub-prefix for every found device. E.g. for RM2 device having MAC address 11:22:33:44:55:66, MQTT prefix will be
broadlink/RM2_44_55_66/
Format supports next placeholders:
{type}- type of the device (RM2, A1, etc){host}- host name of the device{mac}- MAC address of the device{mac_nic}- last 3 octets of the MAC address (NIC)
Just start mqtt.py script using Python interpreter
To record new command just send record message for IR command or recordrf for RF command to the topic broadlink/COMMAND_ID,
where COMMAND_ID is any identifier that can be used for file name (slashes are also allowed)
NOTE: It seems that Python3 is a must for recording RF signals
Example: to record power button for Samsung TV send
record -> broadlink/tv/samsung/power
and recorded interpretation of IR signal will be saved to file commands/tv/samsung/power
To replay previously recorded command send replay message to the topic broadlink/COMMAND_ID,
where COMMAND_ID is identifier if the command
Example: to replay power button for Samsung TV send
replay -> broadlink/tv/samsung/power
and saved interpretation of IR signal will be replayed from file commands/tv/samsung/power
Another format for replaying recorded command is using file name as a message and folder as MQTT topic.
Example: to replay power button for Samsung TV send
power -> broadlink/tv/samsung
and saved interpretation of IR signal will be replayed from file commands/tv/samsung/power
Smart mode means that if file with command doesn't exist it will be recorded.
Every next execution of the command will replay it.
This mode is very convenient for home automation systems.
To start smart mode need to send auto for IR command or autorf for RF command to the command topic
Example:
first time: auto -> broadlink/tv/samsung/power records command
every next time: auto -> broadlink/tv/samsung/power replays command
Macros are created to send several IR signals for single MQTT message.
To start macros execution send macro message to the topic broadlink/MACRO_ID,
where MACRO_ID is a path to scenario file in macros/ folder.
Macros scenario file could contain:
- IR commands (same as
COMMAND_IDin replay mode) - pause instructions (
pause DELAY_IN_MILLISECONDS) - comments (lines started with
#)
Need to set broadlink_rm_temperature_interval configuration parameter to a number of seconds between periodic updates.
E.g.
broadlink_rm_temperature_interval=120
means current temperature will be published to topic broadlink/temperature every 2 minutes
To switch power on (off) need to send command on (off) to broadlink/power topic
Need to set broadlink_sp_energy_interval configuration parameter to a number of seconds between periodic updates.
E.g.
broadlink_sp_energy_interval=120
means current used energy will be published to topic broadlink/energy every 2 minutes
Need to set broadlink_a1_sensors_interval configuration parameter to a number of seconds between periodic updates.
E.g.
broadlink_a1_sensors_interval=120
means current sensors data will be published to topics broadlink/sensors/[temperature/humidity/light/air_quality/noise] every 2 minutes
To switch power on (off) on outlet number N need to send command on (off) to broadlink/power/N topic.
Example:
switch on 2-nd outlet: on -> broadlink/power/2
Need to set broadlink_mp1_state_interval configuration parameter to a number of seconds between periodic updates.
E.g.
broadlink_mp1_state_interval=120
means current state will be published to topics broadlink/state/[s1/s2/s3/s4] every 2 minutes
To open/close curtains need to send a command to broadlink/action topic.
Possible commands are:
opento open curtainscloseto close curtainsstopto stop curtains in the current state
Also it's possible to set fixed position of curtains sending numeric position in percents to the topic broadlink/set
Need to set broadlink_dooya_position_interval configuration parameter to a number of seconds between periodic updates.
E.g.
broadlink_dooya_position_interval=30
means current curtain position in percents will be published to topic broadlink/position every 30 seconds
To change brightness of LED need to send value in percents to broadlink/brightness topic
To switch power on (off) on all (or single only) outlets need to send command on (off) to broadlink/power topic.
To switch power on (off) on outlet number N need to send command on (off) to broadlink/power/N topic.
Example:
switch on 2-nd outlet: on -> broadlink/power/2
Need to set broadlink_bg1_state_interval configuration parameter to a number of seconds between periodic updates.
E.g.
broadlink_bg1_state_interval=120
means current state will be published to topics broadlink/state/[pwr/pwr1/pwr2/maxworktime/maxworktime1/maxworktime2/idcbrightness] every 2 minutes