HW Setup

HW Setup

JTAG

These instructions are for JTAG debugging utilizing Olimex ARM-USB-OCD-H:

https://www.olimex.com/Products/ARM/JTAG/ARM-USB-OCD-H/

Cable adapter:

https://www.olimex.com/Products/ARM/JTAG/ARM-JTAG-20-10/

Connect JTAG debugger to Thingsee as in picture below:

TODO Insert picture here

UART

• Ground, UART Rx and Tx wires soldered to the Thingsee One

Check the test point specification from Thingsee One hardware specification

• FTDI USB to UART adapted cable TTL-232R-3V3

Check the cable pin order in the TTL-232R cable datasheet

TODO Insert picture here