chore(docs): document new commands

timrogers · May 5, 2024 · 57a16bc · 57a16bc
1 parent c8706b2
commit 57a16bc
Showing 1 changed file with 4 additions and 0 deletions.
diff --git a/README.md b/README.md
@@ -61,7 +61,11 @@ The following commands are available for controlling your devices:
 - `litra off`: Turn your Logitech Litra device off
 - `litra toggle`: Toggles your Logitech Litra device on or off
 - `litra brightness`: Sets the brightness of your Logitech Litra device, using either `--value` (measured in lumens) or `--percentage` (as a percentage of the device's maximum brightness). The brightness can be set to any value between the minimum and maximum for the device returned by the `devices` command.
+- `litra brightness-up`: Increases the brightness of your Logitech Litra device, using either `--value` (measured in lumens) or `--percentage` (with a number of percentage points to add to the device's brightness)
+- `litra brightness-down`: Decreases the brightness of your Logitech Litra device, using either `--value` (measured in lumens) or `--percentage` (with a number of percentage points to subtract from the device's brightness)
 - `litra temperature`: Sets the temperature of your Logitech Litra device, using a `--value` measured in kelvin (K). The temperature be set to any multiple of 100 between the minimum and maximum for the device returned by the `devices` command.
+- `litra temperature-up`: Increases the temperature of your Logitech Litra device, using a `--value` measured in kelvin (K). The value must be a multiple of 100.
+- `litra temperature-down`: Decreases the temperature of your Logitech Litra device, using a `--value` measured in kelvin (K). The value must be a multiple of 100.
 - `litra auto-toggle` **(Linux only)**: Automatically turns your Logitech Litra device on when your webcam starts capturing video, and off when it stops capturing video. This command should be left running in the background.
 
 All of the these commands support a `--serial-number`/`-s` argument to specify the serial number of the device you want to target. If you only have one Litra device, you can omit this argument. If you have multiple devices, we recommend specifying it. If it isn't specified, the "first" device will be picked, but this isn't guaranteed to be stable between command runs.