DSO5102P-Python

Access to the Hantek DSO5102P oscilloscope from Python 3.x

See this sites for details:

• https://elinux.org/Das_Oszi_Protocol
• https://randomprojects.org/wiki/Voltcraft_DSO-3062C

My Hantek DSO5102P reports VID:PID as 049f:505a so I added the file 99-dso5102P.rules to /lib/udev/rules.d/ (or to /etc/udev/rules.d/)

SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ATTR{idVendor}=="049f", ATTR{idProduct}=="505a", MODE="0666"

and reload udev rules with

$ sudo udevadm control --reload-rules
$ sudo udevadm trigger

Implemented and tested functions:

• Echo: send data bytes a returned unchanged
• ReadFile: read any file from the DSO filesystem
• LockControlPanel: lock/unlock DSO control panel
• StartAcquisition: start/stop acquisition in the DSO
• KeyTrigger: lets you simulate the press of nearly any button on the DSO's control panel.
• Screenshot: get a screenshot from the DSO (no color palette information)
• ReadSystemTime: read the DSO's system time
• RemoteShell: run shell commands in the DSO

Implemented and not tested functions:

• ReadSettings: read current DSO settings
• ReadSampleData: read sample data from the DSO CH1/CH2