configuration modbus
| Option | Description |
|---|---|
| Modbus Rx-Pin (Default 16) | Set the GPIO für RX Transmission |
| Modbus Tx-Pin (Default 17) | Set the GPIO für RX Transmission |
| Modbus Direction Control RTS-Pin (Default: 32) | if you have a half-dublex RS-485 module (see here you need the modbus direction control pin. Select anyone gpio pin if you don´t need that. |
| Solax Modbus ClientID (in hex) (Default: 01) | ClientID of your Solax Inverter, please check settings at your solax inverter |
| Modbus Baudrate (Default: 19200) | Modbus Baudrate of your Solax inverter, please check settings at your solax inverter |
| Interval for Datatransmission in sec (Default: 5) | measure and transmit each x second your live data |
| Interval for ID Datatransmission in sec (Default: 3600) | measure and transmit each x second the ID data of your Solar Inverter |
| Select Inverter Type (Default: Solax X1) | Select Solax-X1 or Solax-X3 |
| Enable OpenWB Compatibility | If enabled, all activated items with a configured openWB mqtt topic (register.h) will send out too |