Raspberry Pi Distro for Winlink RMS
Branch: master
Clone or download
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Permalink
Type Name Latest commit message Commit time
Failed to load latest commit information.
src
.gitignore
COPYING
README.md

README.md

RMS Pi

Winlink Linux RMS Server Raspberry Pi Distribution. The goal is to make an easy to install/deploy winlink gateway/client in one package. We use LinuxRMS and PAT as the core.

Supported TNC/Devices

Currently we only support the TNCPi as that is the hardware I have access to. Others can be supported as time/equipment allow

Download

Downloads are available as releases from releases

Installation

  1. Download the file from releases
  2. Unzip the image and install it to an sd card like any other Raspberry Pi image
  3. Configure your WiFi by editing rmspi-wpa-supplicant.txt or rmspi-network.txt on the root(boot partition) of the flashed card when using it like a thumb drive
  4. Configure RMS/PAT settings by editing rmspi.txt on the root(boot partition) of the flashed card
  5. Log into your Pi via SSH (it is located at rmspi.local if your computer supports bonjour or the IP address assigned by your router), default username is "pi", default password is "raspberry", change the password using the passwd command

The pat interface is available at http://rmspi.local:8080

Credit

This is based upon:

RMSPi is not affiliated with The Winlink Development Team nor the Winlink 2000 project [http://winlink.org].