Zehnder ComfoConnect LAN C support for Athom Homey

I've made this app to be able to control my Zehnder ComfoAir Q350/450/600 ventilation unit connected to the Zehnder ComfoConnect LAN C gateway.

The way this works is:

• the app connect to the gateway via local IP address (set in app Settings)
• the app controls the connected ventilation unit through the gateway interface.

App was build and tested on:

• Homey PRO
• Zehner ComfoConnect LAN C gateway (software version: U1.2.6)
• Zehnder ComfoAir Q450 PL R VV Basic ST (firmware version: R1.8.2)

Please make sure you provide your gateway IP and PIN in the app settings after installation. This is required to list and add the device. The default PIN is 0000

Known Issues

See Issue Tracker

Supported Languages

• English

Notes

• Build
  • homey app run to run the dev build of the App on your Homey PRO.
  • homey app install to drop a production build onto your Homey PRO.

Change Log

• 1.0.0 Initial release (2022-07-31).

Feedback

Please report issues at the issues section on GitHub.

Thank you notes / credits

This work relies heavily on the ComfoAirQ protocol implementation created by herrJones, found at node-comfoairq