Notes for next rev:
- The holes for the level converter board are not big enough
- There is a resistor in the way of the microsd slot (had to cut the slot a bit)
- There are vias near the microsd slot that contact the metal of the slot
Generic NeoPixel Driver using the Propeller
Part Name | Part | DigiKey |
---|---|---|
J1 | PropPlug Header | 609-3401-ND |
J2 | 3 pin power | 609-3401-ND |
J3 | 4 pin digital out | 609-3401-ND |
J4 | 4 pin expansion | 609-3401-ND |
J5 | 4 pin expansion | 609-3401-ND |
J4 | MicroSD | HR1941CT-ND |
C1, C2, C3, C4, C5 | 0.1uF | 587-1227-1-ND |
R1, R2, R3, R4 | 10KOhm | A121523CT-ND |
R5, R6, R7, R8 | 470Ohm | 311-470HRTR-ND |
X1 | 5MHz | X1050-ND |
U1 | P8X32A | P8X32A-Q44-ND |
U2 | 24LC256 | 24LC256T-I/SNCT-ND |
or U2 | 24LC512 | 24LC512T-I/SNCT-ND |
U3 | 3.3V regulator | ZLDO1117G33DICT-ND |