/
atl1.c
3649 lines (3184 loc) · 97.7 KB
/
atl1.c
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved.
* Copyright(c) 2006 - 2007 Chris Snook <csnook@redhat.com>
* Copyright(c) 2006 - 2008 Jay Cliburn <jcliburn@gmail.com>
*
* Derived from Intel e1000 driver
* Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
*
* Contact Information:
* Xiong Huang <xiong.huang@atheros.com>
* Jie Yang <jie.yang@atheros.com>
* Chris Snook <csnook@redhat.com>
* Jay Cliburn <jcliburn@gmail.com>
*
* This version is adapted from the Attansic reference driver.
*
* TODO:
* Add more ethtool functions.
* Fix abstruse irq enable/disable condition described here:
* http://marc.theaimsgroup.com/?l=linux-netdev&m=116398508500553&w=2
*
* NEEDS TESTING:
* VLAN
* multicast
* promiscuous mode
* interrupt coalescing
* SMP torture testing
*/
#include <linux/atomic.h>
#include <asm/byteorder.h>
#include <linux/compiler.h>
#include <linux/crc32.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/etherdevice.h>
#include <linux/hardirq.h>
#include <linux/if_ether.h>
#include <linux/if_vlan.h>
#include <linux/in.h>
#include <linux/interrupt.h>
#include <linux/ip.h>
#include <linux/irqflags.h>
#include <linux/irqreturn.h>
#include <linux/jiffies.h>
#include <linux/mii.h>
#include <linux/module.h>
#include <linux/net.h>
#include <linux/netdevice.h>
#include <linux/pci.h>
#include <linux/pci_ids.h>
#include <linux/pm.h>
#include <linux/skbuff.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/string.h>
#include <linux/tcp.h>
#include <linux/timer.h>
#include <linux/types.h>
#include <linux/workqueue.h>
#include <net/checksum.h>
#include "atl1.h"
MODULE_AUTHOR("Xiong Huang <xiong.huang@atheros.com>, "
"Chris Snook <csnook@redhat.com>, "
"Jay Cliburn <jcliburn@gmail.com>");
MODULE_LICENSE("GPL");
/* Temporary hack for merging atl1 and atl2 */
#include "atlx.c"
static const struct ethtool_ops atl1_ethtool_ops;
/*
* This is the only thing that needs to be changed to adjust the
* maximum number of ports that the driver can manage.
*/
#define ATL1_MAX_NIC 4
#define OPTION_UNSET -1
#define OPTION_DISABLED 0
#define OPTION_ENABLED 1
#define ATL1_PARAM_INIT { [0 ... ATL1_MAX_NIC] = OPTION_UNSET }
/*
* Interrupt Moderate Timer in units of 2 us
*
* Valid Range: 10-65535
*
* Default Value: 100 (200us)
*/
static int int_mod_timer[ATL1_MAX_NIC+1] = ATL1_PARAM_INIT;
static unsigned int num_int_mod_timer;
module_param_array_named(int_mod_timer, int_mod_timer, int,
&num_int_mod_timer, 0);
MODULE_PARM_DESC(int_mod_timer, "Interrupt moderator timer");
#define DEFAULT_INT_MOD_CNT 100 /* 200us */
#define MAX_INT_MOD_CNT 65000
#define MIN_INT_MOD_CNT 50
struct atl1_option {
enum { enable_option, range_option, list_option } type;
char *name;
char *err;
int def;
union {
struct { /* range_option info */
int min;
int max;
} r;
struct { /* list_option info */
int nr;
struct atl1_opt_list {
int i;
char *str;
} *p;
} l;
} arg;
};
static int atl1_validate_option(int *value, struct atl1_option *opt,
struct pci_dev *pdev)
{
if (*value == OPTION_UNSET) {
*value = opt->def;
return 0;
}
switch (opt->type) {
case enable_option:
switch (*value) {
case OPTION_ENABLED:
dev_info(&pdev->dev, "%s enabled\n", opt->name);
return 0;
case OPTION_DISABLED:
dev_info(&pdev->dev, "%s disabled\n", opt->name);
return 0;
}
break;
case range_option:
if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
dev_info(&pdev->dev, "%s set to %i\n", opt->name,
*value);
return 0;
}
break;
case list_option:{
int i;
struct atl1_opt_list *ent;
for (i = 0; i < opt->arg.l.nr; i++) {
ent = &opt->arg.l.p[i];
if (*value == ent->i) {
if (ent->str[0] != '\0')
dev_info(&pdev->dev, "%s\n",
ent->str);
return 0;
}
}
}
break;
default:
break;
}
dev_info(&pdev->dev, "invalid %s specified (%i) %s\n",
opt->name, *value, opt->err);
*value = opt->def;
return -1;
}
/**
* atl1_check_options - Range Checking for Command Line Parameters
* @adapter: board private structure
*
* This routine checks all command line parameters for valid user
* input. If an invalid value is given, or if no user specified
* value exists, a default value is used. The final value is stored
* in a variable in the adapter structure.
*/
static void atl1_check_options(struct atl1_adapter *adapter)
{
struct pci_dev *pdev = adapter->pdev;
int bd = adapter->bd_number;
if (bd >= ATL1_MAX_NIC) {
dev_notice(&pdev->dev, "no configuration for board#%i\n", bd);
dev_notice(&pdev->dev, "using defaults for all values\n");
}
{ /* Interrupt Moderate Timer */
struct atl1_option opt = {
.type = range_option,
.name = "Interrupt Moderator Timer",
.err = "using default of "
__MODULE_STRING(DEFAULT_INT_MOD_CNT),
.def = DEFAULT_INT_MOD_CNT,
.arg = {.r = {.min = MIN_INT_MOD_CNT,
.max = MAX_INT_MOD_CNT} }
};
int val;
if (num_int_mod_timer > bd) {
val = int_mod_timer[bd];
atl1_validate_option(&val, &opt, pdev);
adapter->imt = (u16) val;
} else
adapter->imt = (u16) (opt.def);
}
}
/*
* atl1_pci_tbl - PCI Device ID Table
*/
static const struct pci_device_id atl1_pci_tbl[] = {
{PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATTANSIC_L1)},
/* required last entry */
{0,}
};
MODULE_DEVICE_TABLE(pci, atl1_pci_tbl);
static const u32 atl1_default_msg = NETIF_MSG_DRV | NETIF_MSG_PROBE |
NETIF_MSG_LINK | NETIF_MSG_TIMER | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP;
static int debug = -1;
module_param(debug, int, 0);
MODULE_PARM_DESC(debug, "Message level (0=none,...,16=all)");
/*
* Reset the transmit and receive units; mask and clear all interrupts.
* hw - Struct containing variables accessed by shared code
* return : 0 or idle status (if error)
*/
static s32 atl1_reset_hw(struct atl1_hw *hw)
{
struct pci_dev *pdev = hw->back->pdev;
struct atl1_adapter *adapter = hw->back;
u32 icr;
int i;
/*
* Clear Interrupt mask to stop board from generating
* interrupts & Clear any pending interrupt events
*/
/*
* atlx_irq_disable(adapter);
* iowrite32(0xffffffff, hw->hw_addr + REG_ISR);
*/
/*
* Issue Soft Reset to the MAC. This will reset the chip's
* transmit, receive, DMA. It will not effect
* the current PCI configuration. The global reset bit is self-
* clearing, and should clear within a microsecond.
*/
iowrite32(MASTER_CTRL_SOFT_RST, hw->hw_addr + REG_MASTER_CTRL);
ioread32(hw->hw_addr + REG_MASTER_CTRL);
iowrite16(1, hw->hw_addr + REG_PHY_ENABLE);
ioread16(hw->hw_addr + REG_PHY_ENABLE);
/* delay about 1ms */
msleep(1);
/* Wait at least 10ms for All module to be Idle */
for (i = 0; i < 10; i++) {
icr = ioread32(hw->hw_addr + REG_IDLE_STATUS);
if (!icr)
break;
/* delay 1 ms */
msleep(1);
/* FIXME: still the right way to do this? */
cpu_relax();
}
if (icr) {
if (netif_msg_hw(adapter))
dev_dbg(&pdev->dev, "ICR = 0x%x\n", icr);
return icr;
}
return 0;
}
/* function about EEPROM
*
* check_eeprom_exist
* return 0 if eeprom exist
*/
static int atl1_check_eeprom_exist(struct atl1_hw *hw)
{
u32 value;
value = ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL);
if (value & SPI_FLASH_CTRL_EN_VPD) {
value &= ~SPI_FLASH_CTRL_EN_VPD;
iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL);
}
value = ioread16(hw->hw_addr + REG_PCIE_CAP_LIST);
return ((value & 0xFF00) == 0x6C00) ? 0 : 1;
}
static bool atl1_read_eeprom(struct atl1_hw *hw, u32 offset, u32 *p_value)
{
int i;
u32 control;
if (offset & 3)
/* address do not align */
return false;
iowrite32(0, hw->hw_addr + REG_VPD_DATA);
control = (offset & VPD_CAP_VPD_ADDR_MASK) << VPD_CAP_VPD_ADDR_SHIFT;
iowrite32(control, hw->hw_addr + REG_VPD_CAP);
ioread32(hw->hw_addr + REG_VPD_CAP);
for (i = 0; i < 10; i++) {
msleep(2);
control = ioread32(hw->hw_addr + REG_VPD_CAP);
if (control & VPD_CAP_VPD_FLAG)
break;
}
if (control & VPD_CAP_VPD_FLAG) {
*p_value = ioread32(hw->hw_addr + REG_VPD_DATA);
return true;
}
/* timeout */
return false;
}
/*
* Reads the value from a PHY register
* hw - Struct containing variables accessed by shared code
* reg_addr - address of the PHY register to read
*/
static s32 atl1_read_phy_reg(struct atl1_hw *hw, u16 reg_addr, u16 *phy_data)
{
u32 val;
int i;
val = ((u32) (reg_addr & MDIO_REG_ADDR_MASK)) << MDIO_REG_ADDR_SHIFT |
MDIO_START | MDIO_SUP_PREAMBLE | MDIO_RW | MDIO_CLK_25_4 <<
MDIO_CLK_SEL_SHIFT;
iowrite32(val, hw->hw_addr + REG_MDIO_CTRL);
ioread32(hw->hw_addr + REG_MDIO_CTRL);
for (i = 0; i < MDIO_WAIT_TIMES; i++) {
udelay(2);
val = ioread32(hw->hw_addr + REG_MDIO_CTRL);
if (!(val & (MDIO_START | MDIO_BUSY)))
break;
}
if (!(val & (MDIO_START | MDIO_BUSY))) {
*phy_data = (u16) val;
return 0;
}
return ATLX_ERR_PHY;
}
#define CUSTOM_SPI_CS_SETUP 2
#define CUSTOM_SPI_CLK_HI 2
#define CUSTOM_SPI_CLK_LO 2
#define CUSTOM_SPI_CS_HOLD 2
#define CUSTOM_SPI_CS_HI 3
static bool atl1_spi_read(struct atl1_hw *hw, u32 addr, u32 *buf)
{
int i;
u32 value;
iowrite32(0, hw->hw_addr + REG_SPI_DATA);
iowrite32(addr, hw->hw_addr + REG_SPI_ADDR);
value = SPI_FLASH_CTRL_WAIT_READY |
(CUSTOM_SPI_CS_SETUP & SPI_FLASH_CTRL_CS_SETUP_MASK) <<
SPI_FLASH_CTRL_CS_SETUP_SHIFT | (CUSTOM_SPI_CLK_HI &
SPI_FLASH_CTRL_CLK_HI_MASK) <<
SPI_FLASH_CTRL_CLK_HI_SHIFT | (CUSTOM_SPI_CLK_LO &
SPI_FLASH_CTRL_CLK_LO_MASK) <<
SPI_FLASH_CTRL_CLK_LO_SHIFT | (CUSTOM_SPI_CS_HOLD &
SPI_FLASH_CTRL_CS_HOLD_MASK) <<
SPI_FLASH_CTRL_CS_HOLD_SHIFT | (CUSTOM_SPI_CS_HI &
SPI_FLASH_CTRL_CS_HI_MASK) <<
SPI_FLASH_CTRL_CS_HI_SHIFT | (1 & SPI_FLASH_CTRL_INS_MASK) <<
SPI_FLASH_CTRL_INS_SHIFT;
iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL);
value |= SPI_FLASH_CTRL_START;
iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL);
ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL);
for (i = 0; i < 10; i++) {
msleep(1);
value = ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL);
if (!(value & SPI_FLASH_CTRL_START))
break;
}
if (value & SPI_FLASH_CTRL_START)
return false;
*buf = ioread32(hw->hw_addr + REG_SPI_DATA);
return true;
}
/*
* get_permanent_address
* return 0 if get valid mac address,
*/
static int atl1_get_permanent_address(struct atl1_hw *hw)
{
u32 addr[2];
u32 i, control;
u16 reg;
u8 eth_addr[ETH_ALEN];
bool key_valid;
if (is_valid_ether_addr(hw->perm_mac_addr))
return 0;
/* init */
addr[0] = addr[1] = 0;
if (!atl1_check_eeprom_exist(hw)) {
reg = 0;
key_valid = false;
/* Read out all EEPROM content */
i = 0;
while (1) {
if (atl1_read_eeprom(hw, i + 0x100, &control)) {
if (key_valid) {
if (reg == REG_MAC_STA_ADDR)
addr[0] = control;
else if (reg == (REG_MAC_STA_ADDR + 4))
addr[1] = control;
key_valid = false;
} else if ((control & 0xff) == 0x5A) {
key_valid = true;
reg = (u16) (control >> 16);
} else
break;
} else
/* read error */
break;
i += 4;
}
*(u32 *) ð_addr[2] = swab32(addr[0]);
*(u16 *) ð_addr[0] = swab16(*(u16 *) &addr[1]);
if (is_valid_ether_addr(eth_addr)) {
memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN);
return 0;
}
}
/* see if SPI FLAGS exist ? */
addr[0] = addr[1] = 0;
reg = 0;
key_valid = false;
i = 0;
while (1) {
if (atl1_spi_read(hw, i + 0x1f000, &control)) {
if (key_valid) {
if (reg == REG_MAC_STA_ADDR)
addr[0] = control;
else if (reg == (REG_MAC_STA_ADDR + 4))
addr[1] = control;
key_valid = false;
} else if ((control & 0xff) == 0x5A) {
key_valid = true;
reg = (u16) (control >> 16);
} else
/* data end */
break;
} else
/* read error */
break;
i += 4;
}
*(u32 *) ð_addr[2] = swab32(addr[0]);
*(u16 *) ð_addr[0] = swab16(*(u16 *) &addr[1]);
if (is_valid_ether_addr(eth_addr)) {
memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN);
return 0;
}
/*
* On some motherboards, the MAC address is written by the
* BIOS directly to the MAC register during POST, and is
* not stored in eeprom. If all else thus far has failed
* to fetch the permanent MAC address, try reading it directly.
*/
addr[0] = ioread32(hw->hw_addr + REG_MAC_STA_ADDR);
addr[1] = ioread16(hw->hw_addr + (REG_MAC_STA_ADDR + 4));
*(u32 *) ð_addr[2] = swab32(addr[0]);
*(u16 *) ð_addr[0] = swab16(*(u16 *) &addr[1]);
if (is_valid_ether_addr(eth_addr)) {
memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN);
return 0;
}
return 1;
}
/*
* Reads the adapter's MAC address from the EEPROM
* hw - Struct containing variables accessed by shared code
*/
static s32 atl1_read_mac_addr(struct atl1_hw *hw)
{
s32 ret = 0;
u16 i;
if (atl1_get_permanent_address(hw)) {
eth_random_addr(hw->perm_mac_addr);
ret = 1;
}
for (i = 0; i < ETH_ALEN; i++)
hw->mac_addr[i] = hw->perm_mac_addr[i];
return ret;
}
/*
* Hashes an address to determine its location in the multicast table
* hw - Struct containing variables accessed by shared code
* mc_addr - the multicast address to hash
*
* atl1_hash_mc_addr
* purpose
* set hash value for a multicast address
* hash calcu processing :
* 1. calcu 32bit CRC for multicast address
* 2. reverse crc with MSB to LSB
*/
static u32 atl1_hash_mc_addr(struct atl1_hw *hw, u8 *mc_addr)
{
u32 crc32, value = 0;
int i;
crc32 = ether_crc_le(6, mc_addr);
for (i = 0; i < 32; i++)
value |= (((crc32 >> i) & 1) << (31 - i));
return value;
}
/*
* Sets the bit in the multicast table corresponding to the hash value.
* hw - Struct containing variables accessed by shared code
* hash_value - Multicast address hash value
*/
static void atl1_hash_set(struct atl1_hw *hw, u32 hash_value)
{
u32 hash_bit, hash_reg;
u32 mta;
/*
* The HASH Table is a register array of 2 32-bit registers.
* It is treated like an array of 64 bits. We want to set
* bit BitArray[hash_value]. So we figure out what register
* the bit is in, read it, OR in the new bit, then write
* back the new value. The register is determined by the
* upper 7 bits of the hash value and the bit within that
* register are determined by the lower 5 bits of the value.
*/
hash_reg = (hash_value >> 31) & 0x1;
hash_bit = (hash_value >> 26) & 0x1F;
mta = ioread32((hw->hw_addr + REG_RX_HASH_TABLE) + (hash_reg << 2));
mta |= (1 << hash_bit);
iowrite32(mta, (hw->hw_addr + REG_RX_HASH_TABLE) + (hash_reg << 2));
}
/*
* Writes a value to a PHY register
* hw - Struct containing variables accessed by shared code
* reg_addr - address of the PHY register to write
* data - data to write to the PHY
*/
static s32 atl1_write_phy_reg(struct atl1_hw *hw, u32 reg_addr, u16 phy_data)
{
int i;
u32 val;
val = ((u32) (phy_data & MDIO_DATA_MASK)) << MDIO_DATA_SHIFT |
(reg_addr & MDIO_REG_ADDR_MASK) << MDIO_REG_ADDR_SHIFT |
MDIO_SUP_PREAMBLE |
MDIO_START | MDIO_CLK_25_4 << MDIO_CLK_SEL_SHIFT;
iowrite32(val, hw->hw_addr + REG_MDIO_CTRL);
ioread32(hw->hw_addr + REG_MDIO_CTRL);
for (i = 0; i < MDIO_WAIT_TIMES; i++) {
udelay(2);
val = ioread32(hw->hw_addr + REG_MDIO_CTRL);
if (!(val & (MDIO_START | MDIO_BUSY)))
break;
}
if (!(val & (MDIO_START | MDIO_BUSY)))
return 0;
return ATLX_ERR_PHY;
}
/*
* Make L001's PHY out of Power Saving State (bug)
* hw - Struct containing variables accessed by shared code
* when power on, L001's PHY always on Power saving State
* (Gigabit Link forbidden)
*/
static s32 atl1_phy_leave_power_saving(struct atl1_hw *hw)
{
s32 ret;
ret = atl1_write_phy_reg(hw, 29, 0x0029);
if (ret)
return ret;
return atl1_write_phy_reg(hw, 30, 0);
}
/*
* Resets the PHY and make all config validate
* hw - Struct containing variables accessed by shared code
*
* Sets bit 15 and 12 of the MII Control regiser (for F001 bug)
*/
static s32 atl1_phy_reset(struct atl1_hw *hw)
{
struct pci_dev *pdev = hw->back->pdev;
struct atl1_adapter *adapter = hw->back;
s32 ret_val;
u16 phy_data;
if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
hw->media_type == MEDIA_TYPE_1000M_FULL)
phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN;
else {
switch (hw->media_type) {
case MEDIA_TYPE_100M_FULL:
phy_data =
MII_CR_FULL_DUPLEX | MII_CR_SPEED_100 |
MII_CR_RESET;
break;
case MEDIA_TYPE_100M_HALF:
phy_data = MII_CR_SPEED_100 | MII_CR_RESET;
break;
case MEDIA_TYPE_10M_FULL:
phy_data =
MII_CR_FULL_DUPLEX | MII_CR_SPEED_10 | MII_CR_RESET;
break;
default:
/* MEDIA_TYPE_10M_HALF: */
phy_data = MII_CR_SPEED_10 | MII_CR_RESET;
break;
}
}
ret_val = atl1_write_phy_reg(hw, MII_BMCR, phy_data);
if (ret_val) {
u32 val;
int i;
/* pcie serdes link may be down! */
if (netif_msg_hw(adapter))
dev_dbg(&pdev->dev, "pcie phy link down\n");
for (i = 0; i < 25; i++) {
msleep(1);
val = ioread32(hw->hw_addr + REG_MDIO_CTRL);
if (!(val & (MDIO_START | MDIO_BUSY)))
break;
}
if ((val & (MDIO_START | MDIO_BUSY)) != 0) {
if (netif_msg_hw(adapter))
dev_warn(&pdev->dev,
"pcie link down at least 25ms\n");
return ret_val;
}
}
return 0;
}
/*
* Configures PHY autoneg and flow control advertisement settings
* hw - Struct containing variables accessed by shared code
*/
static s32 atl1_phy_setup_autoneg_adv(struct atl1_hw *hw)
{
s32 ret_val;
s16 mii_autoneg_adv_reg;
s16 mii_1000t_ctrl_reg;
/* Read the MII Auto-Neg Advertisement Register (Address 4). */
mii_autoneg_adv_reg = MII_AR_DEFAULT_CAP_MASK;
/* Read the MII 1000Base-T Control Register (Address 9). */
mii_1000t_ctrl_reg = MII_ATLX_CR_1000T_DEFAULT_CAP_MASK;
/*
* First we clear all the 10/100 mb speed bits in the Auto-Neg
* Advertisement Register (Address 4) and the 1000 mb speed bits in
* the 1000Base-T Control Register (Address 9).
*/
mii_autoneg_adv_reg &= ~MII_AR_SPEED_MASK;
mii_1000t_ctrl_reg &= ~MII_ATLX_CR_1000T_SPEED_MASK;
/*
* Need to parse media_type and set up
* the appropriate PHY registers.
*/
switch (hw->media_type) {
case MEDIA_TYPE_AUTO_SENSOR:
mii_autoneg_adv_reg |= (MII_AR_10T_HD_CAPS |
MII_AR_10T_FD_CAPS |
MII_AR_100TX_HD_CAPS |
MII_AR_100TX_FD_CAPS);
mii_1000t_ctrl_reg |= MII_ATLX_CR_1000T_FD_CAPS;
break;
case MEDIA_TYPE_1000M_FULL:
mii_1000t_ctrl_reg |= MII_ATLX_CR_1000T_FD_CAPS;
break;
case MEDIA_TYPE_100M_FULL:
mii_autoneg_adv_reg |= MII_AR_100TX_FD_CAPS;
break;
case MEDIA_TYPE_100M_HALF:
mii_autoneg_adv_reg |= MII_AR_100TX_HD_CAPS;
break;
case MEDIA_TYPE_10M_FULL:
mii_autoneg_adv_reg |= MII_AR_10T_FD_CAPS;
break;
default:
mii_autoneg_adv_reg |= MII_AR_10T_HD_CAPS;
break;
}
/* flow control fixed to enable all */
mii_autoneg_adv_reg |= (MII_AR_ASM_DIR | MII_AR_PAUSE);
hw->mii_autoneg_adv_reg = mii_autoneg_adv_reg;
hw->mii_1000t_ctrl_reg = mii_1000t_ctrl_reg;
ret_val = atl1_write_phy_reg(hw, MII_ADVERTISE, mii_autoneg_adv_reg);
if (ret_val)
return ret_val;
ret_val = atl1_write_phy_reg(hw, MII_ATLX_CR, mii_1000t_ctrl_reg);
if (ret_val)
return ret_val;
return 0;
}
/*
* Configures link settings.
* hw - Struct containing variables accessed by shared code
* Assumes the hardware has previously been reset and the
* transmitter and receiver are not enabled.
*/
static s32 atl1_setup_link(struct atl1_hw *hw)
{
struct pci_dev *pdev = hw->back->pdev;
struct atl1_adapter *adapter = hw->back;
s32 ret_val;
/*
* Options:
* PHY will advertise value(s) parsed from
* autoneg_advertised and fc
* no matter what autoneg is , We will not wait link result.
*/
ret_val = atl1_phy_setup_autoneg_adv(hw);
if (ret_val) {
if (netif_msg_link(adapter))
dev_dbg(&pdev->dev,
"error setting up autonegotiation\n");
return ret_val;
}
/* SW.Reset , En-Auto-Neg if needed */
ret_val = atl1_phy_reset(hw);
if (ret_val) {
if (netif_msg_link(adapter))
dev_dbg(&pdev->dev, "error resetting phy\n");
return ret_val;
}
hw->phy_configured = true;
return ret_val;
}
static void atl1_init_flash_opcode(struct atl1_hw *hw)
{
if (hw->flash_vendor >= ARRAY_SIZE(flash_table))
/* Atmel */
hw->flash_vendor = 0;
/* Init OP table */
iowrite8(flash_table[hw->flash_vendor].cmd_program,
hw->hw_addr + REG_SPI_FLASH_OP_PROGRAM);
iowrite8(flash_table[hw->flash_vendor].cmd_sector_erase,
hw->hw_addr + REG_SPI_FLASH_OP_SC_ERASE);
iowrite8(flash_table[hw->flash_vendor].cmd_chip_erase,
hw->hw_addr + REG_SPI_FLASH_OP_CHIP_ERASE);
iowrite8(flash_table[hw->flash_vendor].cmd_rdid,
hw->hw_addr + REG_SPI_FLASH_OP_RDID);
iowrite8(flash_table[hw->flash_vendor].cmd_wren,
hw->hw_addr + REG_SPI_FLASH_OP_WREN);
iowrite8(flash_table[hw->flash_vendor].cmd_rdsr,
hw->hw_addr + REG_SPI_FLASH_OP_RDSR);
iowrite8(flash_table[hw->flash_vendor].cmd_wrsr,
hw->hw_addr + REG_SPI_FLASH_OP_WRSR);
iowrite8(flash_table[hw->flash_vendor].cmd_read,
hw->hw_addr + REG_SPI_FLASH_OP_READ);
}
/*
* Performs basic configuration of the adapter.
* hw - Struct containing variables accessed by shared code
* Assumes that the controller has previously been reset and is in a
* post-reset uninitialized state. Initializes multicast table,
* and Calls routines to setup link
* Leaves the transmit and receive units disabled and uninitialized.
*/
static s32 atl1_init_hw(struct atl1_hw *hw)
{
u32 ret_val = 0;
/* Zero out the Multicast HASH table */
iowrite32(0, hw->hw_addr + REG_RX_HASH_TABLE);
/* clear the old settings from the multicast hash table */
iowrite32(0, (hw->hw_addr + REG_RX_HASH_TABLE) + (1 << 2));
atl1_init_flash_opcode(hw);
if (!hw->phy_configured) {
/* enable GPHY LinkChange Interrupt */
ret_val = atl1_write_phy_reg(hw, 18, 0xC00);
if (ret_val)
return ret_val;
/* make PHY out of power-saving state */
ret_val = atl1_phy_leave_power_saving(hw);
if (ret_val)
return ret_val;
/* Call a subroutine to configure the link */
ret_val = atl1_setup_link(hw);
}
return ret_val;
}
/*
* Detects the current speed and duplex settings of the hardware.
* hw - Struct containing variables accessed by shared code
* speed - Speed of the connection
* duplex - Duplex setting of the connection
*/
static s32 atl1_get_speed_and_duplex(struct atl1_hw *hw, u16 *speed, u16 *duplex)
{
struct pci_dev *pdev = hw->back->pdev;
struct atl1_adapter *adapter = hw->back;
s32 ret_val;
u16 phy_data;
/* ; --- Read PHY Specific Status Register (17) */
ret_val = atl1_read_phy_reg(hw, MII_ATLX_PSSR, &phy_data);
if (ret_val)
return ret_val;
if (!(phy_data & MII_ATLX_PSSR_SPD_DPLX_RESOLVED))
return ATLX_ERR_PHY_RES;
switch (phy_data & MII_ATLX_PSSR_SPEED) {
case MII_ATLX_PSSR_1000MBS:
*speed = SPEED_1000;
break;
case MII_ATLX_PSSR_100MBS:
*speed = SPEED_100;
break;
case MII_ATLX_PSSR_10MBS:
*speed = SPEED_10;
break;
default:
if (netif_msg_hw(adapter))
dev_dbg(&pdev->dev, "error getting speed\n");
return ATLX_ERR_PHY_SPEED;
}
if (phy_data & MII_ATLX_PSSR_DPLX)
*duplex = FULL_DUPLEX;
else
*duplex = HALF_DUPLEX;
return 0;
}
static void atl1_set_mac_addr(struct atl1_hw *hw)
{
u32 value;
/*
* 00-0B-6A-F6-00-DC
* 0: 6AF600DC 1: 000B
* low dword
*/
value = (((u32) hw->mac_addr[2]) << 24) |
(((u32) hw->mac_addr[3]) << 16) |
(((u32) hw->mac_addr[4]) << 8) | (((u32) hw->mac_addr[5]));
iowrite32(value, hw->hw_addr + REG_MAC_STA_ADDR);
/* high dword */
value = (((u32) hw->mac_addr[0]) << 8) | (((u32) hw->mac_addr[1]));
iowrite32(value, (hw->hw_addr + REG_MAC_STA_ADDR) + (1 << 2));
}
/**
* atl1_sw_init - Initialize general software structures (struct atl1_adapter)
* @adapter: board private structure to initialize
*
* atl1_sw_init initializes the Adapter private data structure.
* Fields are initialized based on PCI device information and
* OS network device settings (MTU size).
*/
static int atl1_sw_init(struct atl1_adapter *adapter)
{
struct atl1_hw *hw = &adapter->hw;
struct net_device *netdev = adapter->netdev;
hw->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN;
hw->min_frame_size = ETH_ZLEN + ETH_FCS_LEN;
adapter->wol = 0;
device_set_wakeup_enable(&adapter->pdev->dev, false);
adapter->rx_buffer_len = (hw->max_frame_size + 7) & ~7;
adapter->ict = 50000; /* 100ms */
adapter->link_speed = SPEED_0; /* hardware init */
adapter->link_duplex = FULL_DUPLEX;
hw->phy_configured = false;
hw->preamble_len = 7;
hw->ipgt = 0x60;
hw->min_ifg = 0x50;
hw->ipgr1 = 0x40;
hw->ipgr2 = 0x60;
hw->max_retry = 0xf;
hw->lcol = 0x37;
hw->jam_ipg = 7;
hw->rfd_burst = 8;
hw->rrd_burst = 8;
hw->rfd_fetch_gap = 1;
hw->rx_jumbo_th = adapter->rx_buffer_len / 8;
hw->rx_jumbo_lkah = 1;
hw->rrd_ret_timer = 16;
hw->tpd_burst = 4;
hw->tpd_fetch_th = 16;
hw->txf_burst = 0x100;
hw->tx_jumbo_task_th = (hw->max_frame_size + 7) >> 3;
hw->tpd_fetch_gap = 1;
hw->rcb_value = atl1_rcb_64;
hw->dma_ord = atl1_dma_ord_enh;
hw->dmar_block = atl1_dma_req_256;
hw->dmaw_block = atl1_dma_req_256;
hw->cmb_rrd = 4;
hw->cmb_tpd = 4;
hw->cmb_rx_timer = 1; /* about 2us */
hw->cmb_tx_timer = 1; /* about 2us */
hw->smb_timer = 100000; /* about 200ms */
spin_lock_init(&adapter->lock);
spin_lock_init(&adapter->mb_lock);
return 0;
}
static int mdio_read(struct net_device *netdev, int phy_id, int reg_num)
{
struct atl1_adapter *adapter = netdev_priv(netdev);
u16 result;
atl1_read_phy_reg(&adapter->hw, reg_num & 0x1f, &result);
return result;
}
static void mdio_write(struct net_device *netdev, int phy_id, int reg_num,
int val)
{
struct atl1_adapter *adapter = netdev_priv(netdev);
atl1_write_phy_reg(&adapter->hw, reg_num, val);
}
static int atl1_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
{
struct atl1_adapter *adapter = netdev_priv(netdev);
unsigned long flags;