platform/x86: thinkpad_acpi: Add a s2idle resume quirk for a number o…

…f laptops

Lenovo laptops that contain NVME SSDs across a variety of generations have
trouble resuming from suspend to idle when the IOMMU translation layer is
active for the NVME storage device.

This generally manifests as a large resume delay or page faults. These
delays and page faults occur as a result of a Lenovo BIOS specific SMI
that runs during the D3->D0 transition on NVME devices.

This SMI occurs because of a flag that is set during resume by Lenovo
firmware:

```
OperationRegion (PM80, SystemMemory, 0xFED80380, 0x10)
Field (PM80, AnyAcc, NoLock, Preserve)
{
	SI3R,   1
}

Method (_ON, 0, NotSerialized)  // _ON_: Power On
{
	TPST (0x60D0)
	If ((DAS3 == 0x00))
	{
		If (SI3R)
		{
			TPST (0x60E0)
			M020 (NBRI, 0x00, 0x00, 0x04, (NCMD | 0x06))
			M020 (NBRI, 0x00, 0x00, 0x10, NBAR)
			APMC = HDSI /* \HDSI */
			SLPS = 0x01
			SI3R = 0x00
			TPST (0x60E1)
		}
		D0NV = 0x01
	}
}
```

Create a quirk that will run early in the resume process to prevent this
SMI from running. As any of these machines are fixed, they can be peeled
back from this quirk or narrowed down to individual firmware versions.

Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1910
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/1689
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Mark Pearson <markpearson@lenvo.com>
Link: https://lore.kernel.org/r/20220429030501.1909-3-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

drivers/platform/x86/thinkpad_acpi.c

@@ -312,12 +312,17 @@ struct ibm_init_struct {
 /* DMI Quirks */
 struct quirk_entry {
 	bool btusb_bug;
+	u32 s2idle_bug_mmio;
 };
 
 static struct quirk_entry quirk_btusb_bug = {
 	.btusb_bug = true,
 };
 
+static struct quirk_entry quirk_s2idle_bug = {
+	.s2idle_bug_mmio = 0xfed80380,
+};
+
 static struct {
 	u32 bluetooth:1;
 	u32 hotkey:1;
@@ -4418,9 +4423,119 @@ static const struct dmi_system_id fwbug_list[] __initconst = {
 			DMI_MATCH(DMI_BOARD_NAME, "20MV"),
 		},
 	},
+	{
+		.ident = "L14 Gen2 AMD",
+		.driver_data = &quirk_s2idle_bug,
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "20X5"),
+		}
+	},
+	{
+		.ident = "T14s Gen2 AMD",
+		.driver_data = &quirk_s2idle_bug,
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "20XF"),
+		}
+	},
+	{
+		.ident = "X13 Gen2 AMD",
+		.driver_data = &quirk_s2idle_bug,
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "20XH"),
+		}
+	},
+	{
+		.ident = "T14 Gen2 AMD",
+		.driver_data = &quirk_s2idle_bug,
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "20XK"),
+		}
+	},
+	{
+		.ident = "T14 Gen1 AMD",
+		.driver_data = &quirk_s2idle_bug,
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "20UD"),
+		}
+	},
+	{
+		.ident = "T14 Gen1 AMD",
+		.driver_data = &quirk_s2idle_bug,
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "20UE"),
+		}
+	},
+	{
+		.ident = "T14s Gen1 AMD",
+		.driver_data = &quirk_s2idle_bug,
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "20UH"),
+		}
+	},
+	{
+		.ident = "P14s Gen1 AMD",
+		.driver_data = &quirk_s2idle_bug,
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "20Y1"),
+		}
+	},
+	{
+		.ident = "P14s Gen2 AMD",
+		.driver_data = &quirk_s2idle_bug,
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "21A0"),
+		}
+	},
 	{}
 };
 
+#ifdef CONFIG_SUSPEND
+/*
+ * Lenovo laptops from a variety of generations run a SMI handler during the D3->D0
+ * transition that occurs specifically when exiting suspend to idle which can cause
+ * large delays during resume when the IOMMU translation layer is enabled (the default
+ * behavior) for NVME devices:
+ *
+ * To avoid this firmware problem, skip the SMI handler on these machines before the
+ * D0 transition occurs.
+ */
+static void thinkpad_acpi_amd_s2idle_restore(void)
+{
+	struct resource *res;
+	void __iomem *addr;
+	u8 val;
+
+	res = request_mem_region_muxed(tp_features.quirks->s2idle_bug_mmio, 1,
+					"thinkpad_acpi_pm80");
+	if (!res)
+		return;
+
+	addr = ioremap(tp_features.quirks->s2idle_bug_mmio, 1);
+	if (!addr)
+		goto cleanup_resource;
+
+	val = ioread8(addr);
+	iowrite8(val & ~BIT(0), addr);
+
+	iounmap(addr);
+cleanup_resource:
+	release_resource(res);
+}
+
+static struct acpi_s2idle_dev_ops thinkpad_acpi_s2idle_dev_ops = {
+	.restore = thinkpad_acpi_amd_s2idle_restore,
+};
+#endif
+
 static const struct pci_device_id fwbug_cards_ids[] __initconst = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x24F3) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x24FD) },
@@ -11472,6 +11587,10 @@ static void thinkpad_acpi_module_exit(void)
 
 	tpacpi_lifecycle = TPACPI_LIFE_EXITING;
 
+#ifdef CONFIG_SUSPEND
+	if (tp_features.quirks && tp_features.quirks->s2idle_bug_mmio)
+		acpi_unregister_lps0_dev(&thinkpad_acpi_s2idle_dev_ops);
+#endif
 	if (tpacpi_hwmon)
 		hwmon_device_unregister(tpacpi_hwmon);
 	if (tp_features.sensors_pdrv_registered)
@@ -11645,6 +11764,13 @@ static int __init thinkpad_acpi_module_init(void)
 		tp_features.input_device_registered = 1;
 	}
 
+#ifdef CONFIG_SUSPEND
+	if (tp_features.quirks && tp_features.quirks->s2idle_bug_mmio) {
+		if (!acpi_register_lps0_dev(&thinkpad_acpi_s2idle_dev_ops))
+			pr_info("Using s2idle quirk to avoid %s platform firmware bug\n",
+				(dmi_id && dmi_id->ident) ? dmi_id->ident : "");
+	}
+#endif
 	return 0;
 }