Merge tag 'pci-v4.12-changes' of git://git.kernel.org/pub/scm/linux/k…

…ernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:

 - add framework for supporting PCIe devices in Endpoint mode (Kishon
   Vijay Abraham I)

 - use non-postable PCI config space mappings when possible (Lorenzo
   Pieralisi)

 - clean up and unify mmap of PCI BARs (David Woodhouse)

 - export and unify Function Level Reset support (Christoph Hellwig)

 - avoid FLR for Intel 82579 NICs (Sasha Neftin)

 - add pci_request_irq() and pci_free_irq() helpers (Christoph Hellwig)

 - short-circuit config access failures for disconnected devices (Keith
   Busch)

 - remove D3 sleep delay when possible (Adrian Hunter)

 - freeze PME scan before suspending devices (Lukas Wunner)

 - stop disabling MSI/MSI-X in pci_device_shutdown() (Prarit Bhargava)

 - disable boot interrupt quirk for ASUS M2N-LR (Stefan Assmann)

 - add arch-specific alignment control to improve device passthrough by
   avoiding multiple BARs in a page (Yongji Xie)

 - add sysfs sriov_drivers_autoprobe to control VF driver binding
   (Bodong Wang)

 - allow slots below PCI-to-PCIe "reverse bridges" (Bjorn Helgaas)

 - fix crashes when unbinding host controllers that don't support
   removal (Brian Norris)

 - add driver for MicroSemi Switchtec management interface (Logan
   Gunthorpe)

 - add driver for Faraday Technology FTPCI100 host bridge (Linus
   Walleij)

 - add i.MX7D support (Andrey Smirnov)

 - use generic MSI support for Aardvark (Thomas Petazzoni)

 - make Rockchip driver modular (Brian Norris)

 - advertise 128-byte Read Completion Boundary support for Rockchip
   (Shawn Lin)

 - advertise PCI_EXP_LNKSTA_SLC for Rockchip root port (Shawn Lin)

 - convert atomic_t to refcount_t in HV driver (Elena Reshetova)

 - add CPU IRQ affinity in HV driver (K. Y. Srinivasan)

 - fix PCI bus removal in HV driver (Long Li)

 - add support for ThunderX2 DMA alias topology (Jayachandran C)

 - add ThunderX pass2.x 2nd node MCFG quirk (Tomasz Nowicki)

 - add ITE 8893 bridge DMA alias quirk (Jarod Wilson)

 - restrict Cavium ACS quirk only to CN81xx/CN83xx/CN88xx devices
   (Manish Jaggi)

* tag 'pci-v4.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (146 commits)
  PCI: Don't allow unbinding host controllers that aren't prepared
  ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP
  MAINTAINERS: Add PCI Endpoint maintainer
  Documentation: PCI: Add userguide for PCI endpoint test function
  tools: PCI: Add sample test script to invoke pcitest
  tools: PCI: Add a userspace tool to test PCI endpoint
  Documentation: misc-devices: Add Documentation for pci-endpoint-test driver
  misc: Add host side PCI driver for PCI test function device
  PCI: Add device IDs for DRA74x and DRA72x
  dt-bindings: PCI: dra7xx: Add DT bindings to enable unaligned access
  PCI: dwc: dra7xx: Workaround for errata id i870
  dt-bindings: PCI: dra7xx: Add DT bindings for PCI dra7xx EP mode
  PCI: dwc: dra7xx: Add EP mode support
  PCI: dwc: dra7xx: Facilitate wrapper and MSI interrupts to be enabled independently
  dt-bindings: PCI: Add DT bindings for PCI designware EP mode
  PCI: dwc: designware: Add EP mode support
  Documentation: PCI: Add binding documentation for pci-test endpoint function
  ixgbe: Use pcie_flr() instead of duplicating it
  IB/hfi1: Use pcie_flr() instead of duplicating it
  PCI: imx6: Fix spelling mistake: "contol" -> "control"
  ...

Documentation/ABI/testing/sysfs-bus-pci

@@ -301,3 +301,25 @@ Contact:	Emil Velikov <emil.l.velikov@gmail.com>
 Description:
 		This file contains the revision field of the PCI device.
 		The value comes from device config space. The file is read only.
+
+What:		/sys/bus/pci/devices/.../sriov_drivers_autoprobe
+Date:		April 2017
+Contact:	Bodong Wang<bodong@mellanox.com>
+Description:
+		This file is associated with the PF of a device that
+		supports SR-IOV.  It determines whether newly-enabled VFs
+		are immediately bound to a driver.  It initially contains
+		1, which means the kernel automatically binds VFs to a
+		compatible driver immediately after they are enabled.  If
+		an application writes 0 to the file before enabling VFs,
+		the kernel will not bind VFs to a driver.
+
+		A typical use case is to write 0 to this file, then enable
+		VFs, then assign the newly-created VFs to virtual machines.
+		Note that changing this file does not affect already-
+		enabled VFs.  In this scenario, the user must first disable
+		the VFs, write 0 to sriov_drivers_autoprobe, then re-enable
+		the VFs.
+
+		This is similar to /sys/bus/pci/drivers_autoprobe, but
+		affects only the VFs associated with a specific PF.

Documentation/ABI/testing/sysfs-class-switchtec

@@ -0,0 +1,96 @@
+switchtec - Microsemi Switchtec PCI Switch Management Endpoint
+
+For details on this subsystem look at Documentation/switchtec.txt.
+
+What: 		/sys/class/switchtec
+Date:		05-Jan-2017
+KernelVersion:	v4.11
+Contact:	Logan Gunthorpe <logang@deltatee.com>
+Description:	The switchtec class subsystem folder.
+		Each registered switchtec driver is represented by a switchtecX
+		subfolder (X being an integer >= 0).
+
+
+What:		/sys/class/switchtec/switchtec[0-9]+/component_id
+Date:		05-Jan-2017
+KernelVersion:	v4.11
+Contact:	Logan Gunthorpe <logang@deltatee.com>
+Description:	Component identifier as stored in the hardware (eg. PM8543)
+		(read only)
+Values: 	arbitrary string.
+
+
+What:		/sys/class/switchtec/switchtec[0-9]+/component_revision
+Date:		05-Jan-2017
+KernelVersion:	v4.11
+Contact:	Logan Gunthorpe <logang@deltatee.com>
+Description:	Component revision stored in the hardware (read only)
+Values: 	integer.
+
+
+What:		/sys/class/switchtec/switchtec[0-9]+/component_vendor
+Date:		05-Jan-2017
+KernelVersion:	v4.11
+Contact:	Logan Gunthorpe <logang@deltatee.com>
+Description:	Component vendor as stored in the hardware (eg. MICROSEM)
+		(read only)
+Values: 	arbitrary string.
+
+
+What:		/sys/class/switchtec/switchtec[0-9]+/device_version
+Date:		05-Jan-2017
+KernelVersion:	v4.11
+Contact:	Logan Gunthorpe <logang@deltatee.com>
+Description:	Device version as stored in the hardware (read only)
+Values: 	integer.
+
+
+What:		/sys/class/switchtec/switchtec[0-9]+/fw_version
+Date:		05-Jan-2017
+KernelVersion:	v4.11
+Contact:	Logan Gunthorpe <logang@deltatee.com>
+Description:	Currently running firmware version (read only)
+Values: 	integer (in hexadecimal).
+
+
+What:		/sys/class/switchtec/switchtec[0-9]+/partition
+Date:		05-Jan-2017
+KernelVersion:	v4.11
+Contact:	Logan Gunthorpe <logang@deltatee.com>
+Description:	Partition number for this device in the switch (read only)
+Values: 	integer.
+
+
+What:		/sys/class/switchtec/switchtec[0-9]+/partition_count
+Date:		05-Jan-2017
+KernelVersion:	v4.11
+Contact:	Logan Gunthorpe <logang@deltatee.com>
+Description:	Total number of partitions in the switch (read only)
+Values: 	integer.
+
+
+What:		/sys/class/switchtec/switchtec[0-9]+/product_id
+Date:		05-Jan-2017
+KernelVersion:	v4.11
+Contact:	Logan Gunthorpe <logang@deltatee.com>
+Description:	Product identifier as stored in the hardware (eg. PSX 48XG3)
+		(read only)
+Values: 	arbitrary string.
+
+
+What:		/sys/class/switchtec/switchtec[0-9]+/product_revision
+Date:		05-Jan-2017
+KernelVersion:	v4.11
+Contact:	Logan Gunthorpe <logang@deltatee.com>
+Description:	Product revision stored in the hardware (eg. RevB)
+		(read only)
+Values: 	arbitrary string.
+
+
+What:		/sys/class/switchtec/switchtec[0-9]+/product_vendor
+Date:		05-Jan-2017
+KernelVersion:	v4.11
+Contact:	Logan Gunthorpe <logang@deltatee.com>
+Description:	Product vendor as stored in the hardware (eg. MICROSEM)
+		(read only)
+Values: 	arbitrary string.

Documentation/PCI/00-INDEX

@@ -12,3 +12,13 @@ pci.txt
 	- info on the PCI subsystem for device driver authors
 pcieaer-howto.txt
 	- the PCI Express Advanced Error Reporting Driver Guide HOWTO
+endpoint/pci-endpoint.txt
+	- guide to add endpoint controller driver and endpoint function driver.
+endpoint/pci-endpoint-cfs.txt
+	- guide to use configfs to configure the PCI endpoint function.
+endpoint/pci-test-function.txt
+	- specification of *PCI test* function device.
+endpoint/pci-test-howto.txt
+	- userguide for PCI endpoint test function.
+endpoint/function/binding/
+	- binding documentation for PCI endpoint function

Documentation/PCI/endpoint/function/binding/pci-test.txt

@@ -0,0 +1,17 @@
+PCI TEST ENDPOINT FUNCTION
+
+name: Should be "pci_epf_test" to bind to the pci_epf_test driver.
+
+Configurable Fields:
+vendorid	 : should be 0x104c
+deviceid	 : should be 0xb500 for DRA74x and 0xb501 for DRA72x
+revid		 : don't care
+progif_code	 : don't care
+subclass_code	 : don't care
+baseclass_code	 : should be 0xff
+cache_line_size	 : don't care
+subsys_vendor_id : don't care
+subsys_id	 : don't care
+interrupt_pin	 : Should be 1 - INTA, 2 - INTB, 3 - INTC, 4 -INTD
+msi_interrupts	 : Should be 1 to 32 depending on the number of MSI interrupts
+		   to test

Documentation/PCI/endpoint/pci-endpoint-cfs.txt

@@ -0,0 +1,105 @@
+                   CONFIGURING PCI ENDPOINT USING CONFIGFS
+                    Kishon Vijay Abraham I <kishon@ti.com>
+
+The PCI Endpoint Core exposes configfs entry (pci_ep) to configure the
+PCI endpoint function and to bind the endpoint function
+with the endpoint controller. (For introducing other mechanisms to
+configure the PCI Endpoint Function refer to [1]).
+
+*) Mounting configfs
+
+The PCI Endpoint Core layer creates pci_ep directory in the mounted configfs
+directory. configfs can be mounted using the following command.
+
+	mount -t configfs none /sys/kernel/config
+
+*) Directory Structure
+
+The pci_ep configfs has two directories at its root: controllers and
+functions. Every EPC device present in the system will have an entry in
+the *controllers* directory and and every EPF driver present in the system
+will have an entry in the *functions* directory.
+
+/sys/kernel/config/pci_ep/
+	.. controllers/
+	.. functions/
+
+*) Creating EPF Device
+
+Every registered EPF driver will be listed in controllers directory. The
+entries corresponding to EPF driver will be created by the EPF core.
+
+/sys/kernel/config/pci_ep/functions/
+	.. <EPF Driver1>/
+		... <EPF Device 11>/
+		... <EPF Device 21>/
+	.. <EPF Driver2>/
+		... <EPF Device 12>/
+		... <EPF Device 22>/
+
+In order to create a <EPF device> of the type probed by <EPF Driver>, the
+user has to create a directory inside <EPF DriverN>.
+
+Every <EPF device> directory consists of the following entries that can be
+used to configure the standard configuration header of the endpoint function.
+(These entries are created by the framework when any new <EPF Device> is
+created)
+
+	.. <EPF Driver1>/
+		... <EPF Device 11>/
+			... vendorid
+			... deviceid
+			... revid
+			... progif_code
+			... subclass_code
+			... baseclass_code
+			... cache_line_size
+			... subsys_vendor_id
+			... subsys_id
+			... interrupt_pin
+
+*) EPC Device
+
+Every registered EPC device will be listed in controllers directory. The
+entries corresponding to EPC device will be created by the EPC core.
+
+/sys/kernel/config/pci_ep/controllers/
+	.. <EPC Device1>/
+		... <Symlink EPF Device11>/
+		... <Symlink EPF Device12>/
+		... start
+	.. <EPC Device2>/
+		... <Symlink EPF Device21>/
+		... <Symlink EPF Device22>/
+		... start
+
+The <EPC Device> directory will have a list of symbolic links to
+<EPF Device>. These symbolic links should be created by the user to
+represent the functions present in the endpoint device.
+
+The <EPC Device> directory will also have a *start* field. Once
+"1" is written to this field, the endpoint device will be ready to
+establish the link with the host. This is usually done after
+all the EPF devices are created and linked with the EPC device.
+
+
+			 | controllers/
+				| <Directory: EPC name>/
+					| <Symbolic Link: Function>
+					| start
+			 | functions/
+				| <Directory: EPF driver>/
+					| <Directory: EPF device>/
+						| vendorid
+						| deviceid
+						| revid
+						| progif_code
+						| subclass_code
+						| baseclass_code
+						| cache_line_size
+						| subsys_vendor_id
+						| subsys_id
+						| interrupt_pin
+						| function
+
+[1] -> Documentation/PCI/endpoint/pci-endpoint.txt