Merge branch 'for-6.5/cxl-fwupd' into for-6.5/cxl

Add the first typical (non-sanitization) consumer of the new background command infrastructure, firmware update. Given both firmware-update and sanitization were developed in parallel from the common background-command baseline, resolve some minor context conflicts.
torvalds · Jun 25, 2023 · 867eab6 · 867eab6
2 parents dcfb706 + f6448cb
commit 867eab6
Show file tree

Hide file tree

Showing 6 changed files with 589 additions and 9 deletions.
diff --git a/Documentation/ABI/testing/sysfs-bus-cxl b/Documentation/ABI/testing/sysfs-bus-cxl
@@ -95,6 +95,17 @@ Description:
 		all user data areas of the device.
 
 
+What:		/sys/bus/cxl/devices/memX/firmware/
+Date:		April, 2023
+KernelVersion:	v6.5
+Contact:	linux-cxl@vger.kernel.org
+Description:
+		(RW) Firmware uploader mechanism. The different files under
+		this directory can be used to upload and activate new
+		firmware for CXL devices. The interfaces under this are
+		documented in sysfs-class-firmware.
+
+
 What:		/sys/bus/cxl/devices/*/devtype
 Date:		June, 2021
 KernelVersion:	v5.14

diff --git a/drivers/cxl/Kconfig b/drivers/cxl/Kconfig
@@ -82,6 +82,7 @@ config CXL_PMEM
 config CXL_MEM
 	tristate "CXL: Memory Expansion"
 	depends on CXL_PCI
+	select FW_UPLOAD
 	default CXL_BUS
 	help
 	  The CXL.mem protocol allows a device to act as a provider of "System

diff --git a/drivers/cxl/core/memdev.c b/drivers/cxl/core/memdev.c
@@ -2,6 +2,7 @@
 /* Copyright(c) 2020 Intel Corporation. */
 
 #include <linux/io-64-nonatomic-lo-hi.h>
+#include <linux/firmware.h>
 #include <linux/device.h>
 #include <linux/slab.h>
 #include <linux/idr.h>
@@ -648,6 +649,313 @@ static int cxl_memdev_release_file(struct inode *inode, struct file *file)
 	return 0;
 }
 
+/**
+ * cxl_mem_get_fw_info - Get Firmware info
+ * @cxlds: The device data for the operation
+ *
+ * Retrieve firmware info for the device specified.
+ *
+ * Return: 0 if no error: or the result of the mailbox command.
+ *
+ * See CXL-3.0 8.2.9.3.1 Get FW Info
+ */
+static int cxl_mem_get_fw_info(struct cxl_dev_state *cxlds)
+{
+	struct cxl_mbox_get_fw_info info;
+	struct cxl_mbox_cmd mbox_cmd;
+	int rc;
+
+	mbox_cmd = (struct cxl_mbox_cmd) {
+		.opcode = CXL_MBOX_OP_GET_FW_INFO,
+		.size_out = sizeof(info),
+		.payload_out = &info,
+	};
+
+	rc = cxl_internal_send_cmd(cxlds, &mbox_cmd);
+	if (rc < 0)
+		return rc;
+
+	cxlds->fw.num_slots = info.num_slots;
+	cxlds->fw.cur_slot = FIELD_GET(CXL_FW_INFO_SLOT_INFO_CUR_MASK,
+				       info.slot_info);
+
+	return 0;
+}
+
+/**
+ * cxl_mem_activate_fw - Activate Firmware
+ * @cxlds: The device data for the operation
+ * @slot: slot number to activate
+ *
+ * Activate firmware in a given slot for the device specified.
+ *
+ * Return: 0 if no error: or the result of the mailbox command.
+ *
+ * See CXL-3.0 8.2.9.3.3 Activate FW
+ */
+static int cxl_mem_activate_fw(struct cxl_dev_state *cxlds, int slot)
+{
+	struct cxl_mbox_activate_fw activate;
+	struct cxl_mbox_cmd mbox_cmd;
+
+	if (slot == 0 || slot > cxlds->fw.num_slots)
+		return -EINVAL;
+
+	mbox_cmd = (struct cxl_mbox_cmd) {
+		.opcode = CXL_MBOX_OP_ACTIVATE_FW,
+		.size_in = sizeof(activate),
+		.payload_in = &activate,
+	};
+
+	/* Only offline activation supported for now */
+	activate.action = CXL_FW_ACTIVATE_OFFLINE;
+	activate.slot = slot;
+
+	return cxl_internal_send_cmd(cxlds, &mbox_cmd);
+}
+
+/**
+ * cxl_mem_abort_fw_xfer - Abort an in-progress FW transfer
+ * @cxlds: The device data for the operation
+ *
+ * Abort an in-progress firmware transfer for the device specified.
+ *
+ * Return: 0 if no error: or the result of the mailbox command.
+ *
+ * See CXL-3.0 8.2.9.3.2 Transfer FW
+ */
+static int cxl_mem_abort_fw_xfer(struct cxl_dev_state *cxlds)
+{
+	struct cxl_mbox_transfer_fw *transfer;
+	struct cxl_mbox_cmd mbox_cmd;
+	int rc;
+
+	transfer = kzalloc(struct_size(transfer, data, 0), GFP_KERNEL);
+	if (!transfer)
+		return -ENOMEM;
+
+	/* Set a 1s poll interval and a total wait time of 30s */
+	mbox_cmd = (struct cxl_mbox_cmd) {
+		.opcode = CXL_MBOX_OP_TRANSFER_FW,
+		.size_in = sizeof(*transfer),
+		.payload_in = transfer,
+		.poll_interval_ms = 1000,
+		.poll_count = 30,
+	};
+
+	transfer->action = CXL_FW_TRANSFER_ACTION_ABORT;
+
+	rc = cxl_internal_send_cmd(cxlds, &mbox_cmd);
+	kfree(transfer);
+	return rc;
+}
+
+static void cxl_fw_cleanup(struct fw_upload *fwl)
+{
+	struct cxl_dev_state *cxlds = fwl->dd_handle;
+
+	cxlds->fw.next_slot = 0;
+}
+
+static int cxl_fw_do_cancel(struct fw_upload *fwl)
+{
+	struct cxl_dev_state *cxlds = fwl->dd_handle;
+	struct cxl_memdev *cxlmd = cxlds->cxlmd;
+	int rc;
+
+	rc = cxl_mem_abort_fw_xfer(cxlds);
+	if (rc < 0)
+		dev_err(&cxlmd->dev, "Error aborting FW transfer: %d\n", rc);
+
+	return FW_UPLOAD_ERR_CANCELED;
+}
+
+static enum fw_upload_err cxl_fw_prepare(struct fw_upload *fwl, const u8 *data,
+					 u32 size)
+{
+	struct cxl_dev_state *cxlds = fwl->dd_handle;
+	struct cxl_mbox_transfer_fw *transfer;
+
+	if (!size)
+		return FW_UPLOAD_ERR_INVALID_SIZE;
+
+	cxlds->fw.oneshot = struct_size(transfer, data, size) <
+			    cxlds->payload_size;
+
+	if (cxl_mem_get_fw_info(cxlds))
+		return FW_UPLOAD_ERR_HW_ERROR;
+
+	/*
+	 * So far no state has been changed, hence no other cleanup is
+	 * necessary. Simply return the cancelled status.
+	 */
+	if (test_and_clear_bit(CXL_FW_CANCEL, cxlds->fw.state))
+		return FW_UPLOAD_ERR_CANCELED;
+
+	return FW_UPLOAD_ERR_NONE;
+}
+
+static enum fw_upload_err cxl_fw_write(struct fw_upload *fwl, const u8 *data,
+				       u32 offset, u32 size, u32 *written)
+{
+	struct cxl_dev_state *cxlds = fwl->dd_handle;
+	struct cxl_memdev *cxlmd = cxlds->cxlmd;
+	struct cxl_mbox_transfer_fw *transfer;
+	struct cxl_mbox_cmd mbox_cmd;
+	u32 cur_size, remaining;
+	size_t size_in;
+	int rc;
+
+	*written = 0;
+
+	/* Offset has to be aligned to 128B (CXL-3.0 8.2.9.3.2 Table 8-57) */
+	if (!IS_ALIGNED(offset, CXL_FW_TRANSFER_ALIGNMENT)) {
+		dev_err(&cxlmd->dev,
+			"misaligned offset for FW transfer slice (%u)\n",
+			offset);
+		return FW_UPLOAD_ERR_RW_ERROR;
+	}
+
+	/*
+	 * Pick transfer size based on cxlds->payload_size
+	 * @size must bw 128-byte aligned, ->payload_size is a power of 2
+	 * starting at 256 bytes, and sizeof(*transfer) is 128.
+	 * These constraints imply that @cur_size will always be 128b aligned.
+	 */
+	cur_size = min_t(size_t, size, cxlds->payload_size - sizeof(*transfer));
+
+	remaining = size - cur_size;
+	size_in = struct_size(transfer, data, cur_size);
+
+	if (test_and_clear_bit(CXL_FW_CANCEL, cxlds->fw.state))
+		return cxl_fw_do_cancel(fwl);
+
+	/*
+	 * Slot numbers are 1-indexed
+	 * cur_slot is the 0-indexed next_slot (i.e. 'cur_slot - 1 + 1')
+	 * Check for rollover using modulo, and 1-index it by adding 1
+	 */
+	cxlds->fw.next_slot = (cxlds->fw.cur_slot % cxlds->fw.num_slots) + 1;
+
+	/* Do the transfer via mailbox cmd */
+	transfer = kzalloc(size_in, GFP_KERNEL);
+	if (!transfer)
+		return FW_UPLOAD_ERR_RW_ERROR;
+
+	transfer->offset = cpu_to_le32(offset / CXL_FW_TRANSFER_ALIGNMENT);
+	memcpy(transfer->data, data + offset, cur_size);
+	if (cxlds->fw.oneshot) {
+		transfer->action = CXL_FW_TRANSFER_ACTION_FULL;
+		transfer->slot = cxlds->fw.next_slot;
+	} else {
+		if (offset == 0) {
+			transfer->action = CXL_FW_TRANSFER_ACTION_INITIATE;
+		} else if (remaining == 0) {
+			transfer->action = CXL_FW_TRANSFER_ACTION_END;
+			transfer->slot = cxlds->fw.next_slot;
+		} else {
+			transfer->action = CXL_FW_TRANSFER_ACTION_CONTINUE;
+		}
+	}
+
+	mbox_cmd = (struct cxl_mbox_cmd) {
+		.opcode = CXL_MBOX_OP_TRANSFER_FW,
+		.size_in = size_in,
+		.payload_in = transfer,
+		.poll_interval_ms = 1000,
+		.poll_count = 30,
+	};
+
+	rc = cxl_internal_send_cmd(cxlds, &mbox_cmd);
+	if (rc < 0) {
+		rc = FW_UPLOAD_ERR_RW_ERROR;
+		goto out_free;
+	}
+
+	*written = cur_size;
+
+	/* Activate FW if oneshot or if the last slice was written */
+	if (cxlds->fw.oneshot || remaining == 0) {
+		dev_dbg(&cxlmd->dev, "Activating firmware slot: %d\n",
+			cxlds->fw.next_slot);
+		rc = cxl_mem_activate_fw(cxlds, cxlds->fw.next_slot);
+		if (rc < 0) {
+			dev_err(&cxlmd->dev, "Error activating firmware: %d\n",
+				rc);
+			rc = FW_UPLOAD_ERR_HW_ERROR;
+			goto out_free;
+		}
+	}
+
+	rc = FW_UPLOAD_ERR_NONE;
+
+out_free:
+	kfree(transfer);
+	return rc;
+}
+
+static enum fw_upload_err cxl_fw_poll_complete(struct fw_upload *fwl)
+{
+	struct cxl_dev_state *cxlds = fwl->dd_handle;
+
+	/*
+	 * cxl_internal_send_cmd() handles background operations synchronously.
+	 * No need to wait for completions here - any errors would've been
+	 * reported and handled during the ->write() call(s).
+	 * Just check if a cancel request was received, and return success.
+	 */
+	if (test_and_clear_bit(CXL_FW_CANCEL, cxlds->fw.state))
+		return cxl_fw_do_cancel(fwl);
+
+	return FW_UPLOAD_ERR_NONE;
+}
+
+static void cxl_fw_cancel(struct fw_upload *fwl)
+{
+	struct cxl_dev_state *cxlds = fwl->dd_handle;
+
+	set_bit(CXL_FW_CANCEL, cxlds->fw.state);
+}
+
+static const struct fw_upload_ops cxl_memdev_fw_ops = {
+        .prepare = cxl_fw_prepare,
+        .write = cxl_fw_write,
+        .poll_complete = cxl_fw_poll_complete,
+        .cancel = cxl_fw_cancel,
+        .cleanup = cxl_fw_cleanup,
+};
+
+static void devm_cxl_remove_fw_upload(void *fwl)
+{
+	firmware_upload_unregister(fwl);
+}
+
+int cxl_memdev_setup_fw_upload(struct cxl_dev_state *cxlds)
+{
+	struct device *dev = &cxlds->cxlmd->dev;
+	struct fw_upload *fwl;
+	int rc;
+
+	if (!test_bit(CXL_MEM_COMMAND_ID_GET_FW_INFO, cxlds->enabled_cmds))
+		return 0;
+
+	fwl = firmware_upload_register(THIS_MODULE, dev, dev_name(dev),
+				       &cxl_memdev_fw_ops, cxlds);
+	if (IS_ERR(fwl))
+		return dev_err_probe(dev, PTR_ERR(fwl),
+				     "Failed to register firmware loader\n");
+
+	rc = devm_add_action_or_reset(cxlds->dev, devm_cxl_remove_fw_upload,
+				      fwl);
+	if (rc)
+		dev_err(dev,
+			"Failed to add firmware loader remove action: %d\n",
+			rc);
+
+	return rc;
+}
+EXPORT_SYMBOL_NS_GPL(cxl_memdev_setup_fw_upload, CXL);
+
 static const struct file_operations cxl_memdev_fops = {
 	.owner = THIS_MODULE,
 	.unlocked_ioctl = cxl_memdev_ioctl,