[MIPS] Ocelot C: Fix MAC address detection after platform_device conv…

…ersion. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
torvalds · Nov 6, 2006 · 907c51b · 907c51b
1 parent d6b861c
commit 907c51b
Show file tree

Hide file tree

Showing 4 changed files with 202 additions and 180 deletions.
diff --git a/arch/mips/momentum/ocelot_c/Makefile b/arch/mips/momentum/ocelot_c/Makefile
@@ -2,7 +2,7 @@
 # Makefile for Momentum Computer's Ocelot-C and -CS boards.
 #
 
-obj-y	 		+= cpci-irq.o irq.o prom.o reset.o \
+obj-y	 		+= cpci-irq.o irq.o platform.o prom.o reset.o \
 			   setup.o uart-irq.o
 
 obj-$(CONFIG_KGDB)	+= dbg_io.o
diff --git a/arch/mips/momentum/ocelot_c/platform.c b/arch/mips/momentum/ocelot_c/platform.c
@@ -0,0 +1,201 @@
+#include <linux/delay.h>
+#include <linux/if_ether.h>
+#include <linux/ioport.h>
+#include <linux/mv643xx.h>
+#include <linux/platform_device.h>
+
+#include "ocelot_c_fpga.h"
+
+#if defined(CONFIG_MV643XX_ETH) || defined(CONFIG_MV643XX_ETH_MODULE)
+
+static struct resource mv643xx_eth_shared_resources[] = {
+	[0] = {
+		.name   = "ethernet shared base",
+		.start  = 0xf1000000 + MV643XX_ETH_SHARED_REGS,
+		.end    = 0xf1000000 + MV643XX_ETH_SHARED_REGS +
+		                       MV643XX_ETH_SHARED_REGS_SIZE - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device mv643xx_eth_shared_device = {
+	.name		= MV643XX_ETH_SHARED_NAME,
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(mv643xx_eth_shared_resources),
+	.resource	= mv643xx_eth_shared_resources,
+};
+
+#define MV_SRAM_BASE			0xfe000000UL
+#define MV_SRAM_SIZE			(256 * 1024)
+
+#define MV_SRAM_RXRING_SIZE		(MV_SRAM_SIZE / 4)
+#define MV_SRAM_TXRING_SIZE		(MV_SRAM_SIZE / 4)
+
+#define MV_SRAM_BASE_ETH0		MV_SRAM_BASE
+#define MV_SRAM_BASE_ETH1		(MV_SRAM_BASE + (MV_SRAM_SIZE / 2))
+
+#define MV64x60_IRQ_ETH_0 48
+#define MV64x60_IRQ_ETH_1 49
+
+#ifdef CONFIG_MV643XX_ETH_0
+
+static struct resource mv64x60_eth0_resources[] = {
+	[0] = {
+		.name	= "eth0 irq",
+		.start	= MV64x60_IRQ_ETH_0,
+		.end	= MV64x60_IRQ_ETH_0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static char eth0_mac_addr[ETH_ALEN];
+
+static struct mv643xx_eth_platform_data eth0_pd = {
+	.mac_addr	= eth0_mac_addr,
+
+	.tx_sram_addr	= MV_SRAM_BASE_ETH0,
+	.tx_sram_size	= MV_SRAM_TXRING_SIZE,
+	.tx_queue_size	= MV_SRAM_TXRING_SIZE / 16,
+
+	.rx_sram_addr	= MV_SRAM_BASE_ETH0 + MV_SRAM_TXRING_SIZE,
+	.rx_sram_size	= MV_SRAM_RXRING_SIZE,
+	.rx_queue_size	= MV_SRAM_RXRING_SIZE / 16,
+};
+
+static struct platform_device eth0_device = {
+	.name		= MV643XX_ETH_NAME,
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(mv64x60_eth0_resources),
+	.resource	= mv64x60_eth0_resources,
+	.dev = {
+		.platform_data = &eth0_pd,
+	},
+};
+#endif /* CONFIG_MV643XX_ETH_0 */
+
+#ifdef CONFIG_MV643XX_ETH_1
+
+static struct resource mv64x60_eth1_resources[] = {
+	[0] = {
+		.name	= "eth1 irq",
+		.start	= MV64x60_IRQ_ETH_1,
+		.end	= MV64x60_IRQ_ETH_1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static char eth1_mac_addr[ETH_ALEN];
+
+static struct mv643xx_eth_platform_data eth1_pd = {
+	.mac_addr	= eth1_mac_addr,
+
+	.tx_sram_addr	= MV_SRAM_BASE_ETH1,
+	.tx_sram_size	= MV_SRAM_TXRING_SIZE,
+	.tx_queue_size	= MV_SRAM_TXRING_SIZE / 16,
+
+	.rx_sram_addr	= MV_SRAM_BASE_ETH1 + MV_SRAM_TXRING_SIZE,
+	.rx_sram_size	= MV_SRAM_RXRING_SIZE,
+	.rx_queue_size	= MV_SRAM_RXRING_SIZE / 16,
+};
+
+static struct platform_device eth1_device = {
+	.name		= MV643XX_ETH_NAME,
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(mv64x60_eth1_resources),
+	.resource	= mv64x60_eth1_resources,
+	.dev = {
+		.platform_data = &eth1_pd,
+	},
+};
+#endif /* CONFIG_MV643XX_ETH_1 */
+
+static struct platform_device *mv643xx_eth_pd_devs[] __initdata = {
+	&mv643xx_eth_shared_device,
+#ifdef CONFIG_MV643XX_ETH_0
+	&eth0_device,
+#endif
+#ifdef CONFIG_MV643XX_ETH_1
+	&eth1_device,
+#endif
+	/* The third port is not wired up on the Ocelot C */
+};
+
+static u8 __init exchange_bit(u8 val, u8 cs)
+{
+	/* place the data */
+	OCELOT_FPGA_WRITE((val << 2) | cs, EEPROM_MODE);
+	udelay(1);
+
+	/* turn the clock on */
+	OCELOT_FPGA_WRITE((val << 2) | cs | 0x2, EEPROM_MODE);
+	udelay(1);
+
+	/* turn the clock off and read-strobe */
+	OCELOT_FPGA_WRITE((val << 2) | cs | 0x10, EEPROM_MODE);
+
+	/* return the data */
+	return (OCELOT_FPGA_READ(EEPROM_MODE) >> 3) & 0x1;
+}
+
+static void __init get_mac(char dest[6])
+{
+	u8 read_opcode[12] = {1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
+	int i,j;
+
+	for (i = 0; i < 12; i++)
+		exchange_bit(read_opcode[i], 1);
+
+	for (j = 0; j < 6; j++) {
+		dest[j] = 0;
+		for (i = 0; i < 8; i++) {
+			dest[j] <<= 1;
+			dest[j] |= exchange_bit(0, 1);
+		}
+	}
+
+	/* turn off CS */
+	exchange_bit(0,0);
+}
+
+/*
+ * Copy and increment ethernet MAC address by a small value.
+ *
+ * This is useful for systems where the only one MAC address is stored in
+ * non-volatile memory for multiple ports.
+ */
+static inline void eth_mac_add(unsigned char *dst, unsigned char *src,
+	unsigned int add)
+{
+	int i;
+
+	BUG_ON(add >= 256);
+
+	for (i = ETH_ALEN; i >= 0; i--) {
+		dst[i] = src[i] + add;
+		add = dst[i] < src[i];		/* compute carry */
+	}
+
+	WARN_ON(add);
+}
+
+static int __init mv643xx_eth_add_pds(void)
+{
+	unsigned char mac[ETH_ALEN];
+	int ret;
+
+	get_mac(mac);
+#ifdef CONFIG_MV643XX_ETH_0
+	eth_mac_add(eth1_mac_addr, mac, 0);
+#endif
+#ifdef CONFIG_MV643XX_ETH_1
+	eth_mac_add(eth1_mac_addr, mac, 1);
+#endif
+	ret = platform_add_devices(mv643xx_eth_pd_devs,
+			ARRAY_SIZE(mv643xx_eth_pd_devs));
+
+	return ret;
+}
+
+device_initcall(mv643xx_eth_add_pds);
+
+#endif /* defined(CONFIG_MV643XX_ETH) || defined(CONFIG_MV643XX_ETH_MODULE) */
diff --git a/arch/mips/momentum/ocelot_c/prom.c b/arch/mips/momentum/ocelot_c/prom.c
@@ -31,10 +31,6 @@ struct callvectors* debug_vectors;
 extern unsigned long marvell_base;
 extern unsigned int cpu_clock;
 
-#ifdef CONFIG_MV643XX_ETH
-extern unsigned char prom_mac_addr_base[6];
-#endif
-
 const char *get_system_type(void)
 {
 #ifdef CONFIG_CPU_SR71000
@@ -44,55 +40,6 @@ const char *get_system_type(void)
 #endif
 }
 
-#ifdef CONFIG_MV643XX_ETH
-static void burn_clocks(void)
-{
-	int i;
-
-	/* this loop should burn at least 1us -- this should be plenty */
-	for (i = 0; i < 0x10000; i++)
-		;
-}
-
-static u8 exchange_bit(u8 val, u8 cs)
-{
-	/* place the data */
-	OCELOT_FPGA_WRITE((val << 2) | cs, EEPROM_MODE);
-	burn_clocks();
-
-	/* turn the clock on */
-	OCELOT_FPGA_WRITE((val << 2) | cs | 0x2, EEPROM_MODE);
-	burn_clocks();
-
-	/* turn the clock off and read-strobe */
-	OCELOT_FPGA_WRITE((val << 2) | cs | 0x10, EEPROM_MODE);
-
-	/* return the data */
-	return ((OCELOT_FPGA_READ(EEPROM_MODE) >> 3) & 0x1);
-}
-
-void get_mac(char dest[6])
-{
-	u8 read_opcode[12] = {1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
-	int i,j;
-
-	for (i = 0; i < 12; i++)
-		exchange_bit(read_opcode[i], 1);
-
-	for (j = 0; j < 6; j++) {
-		dest[j] = 0;
-		for (i = 0; i < 8; i++) {
-			dest[j] <<= 1;
-			dest[j] |= exchange_bit(0, 1);
-		}
-	}
-
-	/* turn off CS */
-	exchange_bit(0,0);
-}
-#endif
-
-
 #ifdef CONFIG_64BIT
 
 unsigned long signext(unsigned long addr)
@@ -226,11 +173,6 @@ void __init prom_init(void)
 	mips_machgroup = MACH_GROUP_MOMENCO;
 	mips_machtype = MACH_MOMENCO_OCELOT_C;
 
-#ifdef CONFIG_MV643XX_ETH
-	/* get the base MAC address for on-board ethernet ports */
-	get_mac(prom_mac_addr_base);
-#endif
-
 #ifndef CONFIG_64BIT
 	debug_vectors->printf("Booting Linux kernel...\n");
 #endif