Move rate limit documentation.

docs/basics.md

@@ -321,35 +321,6 @@ In this example, traffic routed through the first frontend will have the `X-Fram
 !!! note
     The detailed documentation for those security headers can be found in [unrolled/secure](https://github.com/unrolled/secure#available-options).
 
-#### Rate limiting
-
-Rate limiting can be configured per frontend.  
-Multiple sets of rates can be added to each frontend, but the time periods must be unique.
-
-```toml
-[frontends]
-    [frontends.frontend1]
-    passHostHeader = true
-    entrypoints = ["http"]
-    backend = "backend1"
-        [frontends.frontend1.routes.test_1]
-        rule = "Path:/"
-    [frontends.frontend1.ratelimit]
-    extractorfunc = "client.ip"
-        [frontends.frontend1.ratelimit.rateset.rateset1]
-        period = "10s"
-        average = 100
-        burst = 200
-        [frontends.frontend1.ratelimit.rateset.rateset2]
-        period = "3s"
-        average = 5
-        burst = 10
-```
-
-In the above example, frontend1 is configured to limit requests by the client's ip address.  
-An average of 5 requests every 3 seconds is allowed and an average of 100 requests every 10 seconds.  
-These can "burst" up to 10 and 200 in each period respectively.
-
 ### Backends
 
 A backend is responsible to load-balance the traffic coming from one or more frontends to a set of http servers.

docs/configuration/commons.md

@@ -277,6 +277,36 @@ Custom error pages are easiest to implement using the file provider.
 For dynamic providers, the corresponding template file needs to be customized accordingly and referenced in the Traefik configuration.
 
 
+## Rate limiting
+
+Rate limiting can be configured per frontend.  
+Multiple sets of rates can be added to each frontend, but the time periods must be unique.
+
+```toml
+[frontends]
+    [frontends.frontend1]
+    passHostHeader = true
+    entrypoints = ["http"]
+    backend = "backend1"
+        [frontends.frontend1.routes.test_1]
+        rule = "Path:/"
+    [frontends.frontend1.ratelimit]
+    extractorfunc = "client.ip"
+        [frontends.frontend1.ratelimit.rateset.rateset1]
+        period = "10s"
+        average = 100
+        burst = 200
+        [frontends.frontend1.ratelimit.rateset.rateset2]
+        period = "3s"
+        average = 5
+        burst = 10
+```
+
+In the above example, frontend1 is configured to limit requests by the client's ip address.  
+An average of 5 requests every 3 seconds is allowed and an average of 100 requests every 10 seconds.  
+These can "burst" up to 10 and 200 in each period respectively.
+
+
 ## Retry Configuration
 
 ```toml