Skip to content

Commit

Permalink
config.teensypp.h: Modify pins to be more like Teensylu and Printrboard.
Browse files Browse the repository at this point in the history
  • Loading branch information
@drf5n @Traumflug
drf5n authored and Traumflug committed May 29, 2014
1 parent 6dbc7a7 commit e771d23
Showing 1 changed file with 41 additions and 31 deletions.
72 changes: 41 additions & 31 deletions config.teensypp.h
View file
Expand Up @@ -241,29 +241,38 @@ DaveX plan for Teensylu/printrboard-type pinouts (ref teensylu & sprinter) for a
USB
GND GND |-----#####-----| +5V ATX +5SB
ATX PS_ON PWM 27 |b7 ##### b6| 26 PWM* Stepper Enable
PWM 0 |d0 b5| 25 PWM* X STEP
PWM 1 |d1 b4| 24 PWM X DIR
X_MIN 2 |d2 b3| 23 Y STEP
Y_MIN 3 |d3 b2| 22 Y DIR
Z_MIN 4 |d4 * * b1| 21 Z STEP
5 |d5 e e b0| 20 Z DIR
LED 6 |d6 5 4 e7| 19 E STEP
7 |d7 e6| 18 E DIR
SDSS 8 |e0 | GND
SCK 9 |e1 4 0 R| AREF
MOSI 10 |c0 5 1 f0| 38 A0 Extruder TC
MISO 11 |c1 6 2 f1| 39 A1 Bed TC
12 |c2 7 3 f2| 40 A2
PWM 0 |d0 b5| 25 PWM*
PWM 1 |d1 b4| 24 PWM
X_MIN 2 |d2 b3| 23
Y_MIN 3 |d3 b2| 22
Z_MIN 4 |d4 * * b1| 21
5 |d5 e e b0| 20
LED 6 |d6 5 4 e7| 19
7 |d7 e6| 18
8 |e0 | GND
9 |e1 a4 a0 R| AREF
10 |c0 a5 a1 f0| 38 A0
11 |c1 a6 a2 f1| 39 A1
12 |c2 a7 a3 f2| 40 A2
13 |c3 f3| 41 A3
Fan PWM 14 |c4 V G R f4| 42 A4
Bed Heat PWM 15 |c5 c n S f5| 43 A5
Extruder Heat PWM 16 |c6 c d T f6| 44 A6
17 |c7 * * * f7| 45 A7
Bed Heat PWM 14 |c4 V G R f4| 42 A4
Extruder Heat PWM 15 |c5 c n S f5| 43 A5
Fan PWM 16 |c6 c d T f6| 44 A6 Bed TC
17 |c7 * * * f7| 45 A7 Extruder TC *4.7k *+5
-----------------
Interior E4: 36, INT4
Interior E5: 37, INT5
Interior PA0-7: 28-35 -- Printrboard and Teensylu use these pins for step & direction
Interior PA0-7: 28-35 -- Printrboard and Teensylu use these pins for step & direction:
T++ PA Signal Marlin
28 a0 X_STEP 0
29 a1 X_DIR 1
30 a2 Y_STEP 2
31 a3 Y_DIR 3
32 a4 Z_STEP 4
33 a5 Z_DIR 5
34 a6 E_STEP 6
35 a7 E_DIR 7
* PWM on pins PB5/25/OC1A and PB6/26/OC1B pins would interfere with timer/counter1 for Teacup.
Avoid trying to use these two PWMs, and try to use the other 7 PWMs instead.
Expand All @@ -288,8 +297,8 @@ DaveX plan for Teensylu/printrboard-type pinouts (ref teensylu & sprinter) for a
/* starting down the left side for digital, and later down the right for analog */
/* General layout: ccw from upper left: stops, heaters, E,Z,Y,X, temp sensors */

#define X_STEP_PIN DIO25
#define X_DIR_PIN DIO24
#define X_STEP_PIN DIO28
#define X_DIR_PIN DIO29
#define X_MIN_PIN DIO2
//#define X_MAX_PIN xxxx
//#define X_ENABLE_PIN xxxx
Expand All @@ -298,8 +307,8 @@ DaveX plan for Teensylu/printrboard-type pinouts (ref teensylu & sprinter) for a
//#define X_INVERT_MAX
//#define X_INVERT_ENABLE

#define Y_STEP_PIN DIO23
#define Y_DIR_PIN DIO22
#define Y_STEP_PIN DIO30
#define Y_DIR_PIN DIO31
#define Y_MIN_PIN DIO3
//#define Y_MAX_PIN xxxx
//#define Y_ENABLE_PIN xxxx
Expand All @@ -308,8 +317,8 @@ DaveX plan for Teensylu/printrboard-type pinouts (ref teensylu & sprinter) for a
//#define Y_INVERT_MAX
//#define Y_INVERT_ENABLE

#define Z_STEP_PIN DIO21
#define Z_DIR_PIN DIO20
#define Z_STEP_PIN DIO32
#define Z_DIR_PIN DIO33
#define Z_MIN_PIN DIO4
//#define Z_MAX_PIN xxxx
//#define Z_ENABLE_PIN DIO17
Expand All @@ -318,8 +327,8 @@ DaveX plan for Teensylu/printrboard-type pinouts (ref teensylu & sprinter) for a
//#define Z_INVERT_MAX
//#define Z_INVERT_ENABLE

#define E_STEP_PIN DIO19
#define E_DIR_PIN DIO18
#define E_STEP_PIN DIO34
#define E_DIR_PIN DIO35
//#define E_ENABLE_PIN xxxx
#define E_INVERT_DIR
//#define E_INVERT_ENABLE
Expand Down Expand Up @@ -395,8 +404,8 @@ DaveX plan for Teensylu/printrboard-type pinouts (ref teensylu & sprinter) for a
#endif

// name type pin additional
DEFINE_TEMP_SENSOR(extruder, TT_THERMISTOR, AIO0, THERMISTOR_EXTRUDER)
DEFINE_TEMP_SENSOR(bed, TT_THERMISTOR, AIO1, THERMISTOR_EXTRUDER)
DEFINE_TEMP_SENSOR(extruder, TT_THERMISTOR, AIO7, THERMISTOR_EXTRUDER)
DEFINE_TEMP_SENSOR(bed, TT_THERMISTOR, AIO6, THERMISTOR_EXTRUDER)
// "noheater" is a special name for a sensor which doesn't have a heater.
// Use "M105 P#" to read it, where # is a zero-based index into this list.
// DEFINE_TEMP_SENSOR(noheater, TT_THERMISTOR, 1, 0)
Expand Down Expand Up @@ -450,9 +459,9 @@ DEFINE_TEMP_SENSOR(bed, TT_THERMISTOR, AIO1, THERMISTOR_EXTRUDER)
#endif

// name port pwm
DEFINE_HEATER(extruder, DIO16, 1)
DEFINE_HEATER(bed, DIO15, 1)
DEFINE_HEATER(fan, DIO14, 0)
DEFINE_HEATER(extruder, DIO15, 1)
DEFINE_HEATER(bed, DIO14, 1)
DEFINE_HEATER(fan, DIO16, 0)
// DEFINE_HEATER(chamber, PIND7, 1)
// DEFINE_HEATER(motor, PIND6, 1)

Expand Down Expand Up @@ -658,5 +667,6 @@ PWM value for 'off'
* OCR3B - PC5 - DIO15 *
* OCR3C - PC4 - DIO14 *
* OCR2A - PB4 - DIO24 *
* OCR2B - PD1 - DIO1 *
* *
\***************************************************************************/

0 comments on commit e771d23

Please sign in to comment.