Skip to content

Cogs for a Discord bot related to the mobile game Puzzle & Dragons

License

Notifications You must be signed in to change notification settings

TsubakiBotPad/pad-cogs

Repository files navigation

pad-cogs

Important: You must use Python 3.8 for the setup!! If you use an earlier or later version, things WILL break. It's not just convenient to be on the same version as us, it's mandatory.

Setting up your own Tsubaki instance

Prerequisites / Tools

  • Install Git
  • Install Python 3.8
  • Familiarize yourself with how to use a command prompt and Git Bash (if you can't do this you will have a bad time)

Red's Installation Guide is a useful resource if you're a first timer.

I suggest using PyCharm Community for development. Change into the PycharmProjects directory and clone your fork of the repo:

Check out the repo

Fork this repo (you are probably already on the page, but if not go here).

Note: If you are developing a cog that is in the misc-cogs repo, you may need to complete some steps for both pad-cogs AND misc-cogs.

You will need a GitHub account to do this. Click the button that says "Fork" in the upper-right-hand corner of the page.

Git clone your forked repository.

Create a Discord Bot

If you don't have one already, follow the instructions to create a bot in Red's official documentation:

Creating a bot account

Keep the bot token that you get from Discord at the end of the instructions handy - you will need it to set up the bot later.

Installation

  1. Clone this repo (fork if you're contributing)
  2. Create a python 3 venv. virtualenv -p python3 <envname>
  3. Activate the venv.
  4. pip install -r requirements.txt

The above steps install Red automatically. You can now follow the Red instructions to startup the bot:

Setting Up and Running Red (macOS)

In command line:

  • redbot-setup
  • redbot <bot_name>

Configure Your Bot

The rest of the guide takes place from inside Discord. Replace ^ with your prefix to talk to your bot.

Tell your bot where to find the code

Once the bot is launched, set it to use your repo directory as a cog path. Type this in Discord where the bot is:

^addpath path/to/repo/root

e.g

^addpath /Users/Tsubaki/src/pad-cogs

Note: you may have to do this for pad-cogs, core-cogs, and misc-cogs. If you have forked and cloned core & misc cogs, this process is the same! However, if you are only developing in pad-cogs, and installing core-cogs & misc-cogs from remote repos then:

  1. ^load downloader (this cog is always installed by default)
  2. ^repo install misc https://github.com/TsubakiBotPad/misc-cogs
  3. ^repo install core https://github.com/TsubakiBotPad/core-cogs
  4. Now you can install, for example, the menulistener cog with ^repo install core menulistener. The menulistener cog is what makes the ^id menus interactive instead of single-panel static screens with unusable emoji below them.

Load cogs

Load relevant cogs (whichever cogs you are developing, dbcog, and padinfo) using the ^load command.

Note: We suggest you load dbcog and padinfo so that you will have something to test that your bot installation correctly installed; however, if your development does not involve dbcog as a dependency, you may want to keep it unloaded (^unload dbcog, get it back with ^load dbcog at any time), simply because it is very slow for the bot to initialize dbcog on startup, and you might be restarting your bot a lot during development, e.g. if you ever need to edit or update a library.

Syntax: ^load <cog 1> ... <cog n>

e.g
^load dbcog padinfo

You can see which cogs you have loaded using the ^cogs command.

Test a simple command

You should now be able to run basic commands like ^id

^id tsubaki

Should return something like:

image

Happy developing!

Appendix

Debugging

  • Use ^traceback 1 if you encounter any errors to display them in discord.

Emoji

You may have noticed that emojis are replaced with placeholders in some commands. This is because the bot does not have access to the specific emojis.

  • If you are doing in-depth development of the ^id command, your bot will need to be invited to the emoji servers. Talk to River to get access to these servers.

  • Once you and your bot have joined the servers, use ^padinfo emojiserver add <server_id_1> ... <server_id_n> with the IDs she gives you.

Cog list

Most cogs here relate to the mobile game 'Puzzle & Dragons'.

Cog Purpose
azurlane Azur Lane card lookup
crowddata Crowdsourced data collection
crud Database editor. Not useful for bots other than prod Tsubaki
dbcog Central cog to host all PAD data
dungeoncog A cog to search and get info for dungeons
damagecalc Simple attack damage calculator
feedback A specialized feedback cog for Tsubaki specifically
monidlistener A listener to give info for monster ids
padboard Converts board images to dawnglare board/solved board links
padbuildimg Creates images of PAD teams via a special query language
padbuilds See user-made builds for dungeons i think??? (nobody uses this)
padevents A scheduler cog to help players see upcoming daily GH dungeons.
padglobal Global PAD info commands
padle A wordle-inspired monster guessing game
padinfo Monster lookup and info display
padmonitor Keeps an eye out for PAD updates
pipelineui Interface for running the pipeline (Tsubaki-only)
pricecheck Lumon's thing. Something about stamina trade equivalence
profile Global user PAD profile storage and lookup

About

Cogs for a Discord bot related to the mobile game Puzzle & Dragons

Topics

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Sponsor this project

Packages

No packages published

Languages