This is guide where I have dumped my personal steps to getting Ubuntu 16.04 running smoothly with my Alienware 13 R3 (Early 2017 with Kaby Lake) with OLED.
Please be aware that your mileage my vary. I am definitely no Linux/Ubuntu expert. If you have any feedback, please raise an issue!
I take no responsibility for any damage or problems that arise as a result from following this guide.
Running Linux on a "hybrid" GPU (e.g. Nvidia Optimus) is a little trickier than without. It's important that you understand the technology and what trade-offs you want to make by using Linux.
I highly recommend that you read the following before continuing:
- Dell's Knowledge Base article on Nvidia Optimus and Ubuntu
- A great summary of Nvidia Optimus (from one of the bumblebee devs)
This guide will result in primarily using the integrated GPU (intel) with the option of invoking the discrete (NVIDIA GTX 1060) card via bumblebee.
My reasoning was:
- get the most out of the 76 watt-hour-battery by using the integrated GPU as much as possible
- able to be explicit about when I want to use the discrete GPU (e.g. When I'm using Blender)
- primarily do my gaming in Windows
- currently the most stable configuration that I've been able to achieve
Please be aware that running permanently on the discrete GPU via sudo prime-select nvidia will not work if you follow the steps in this guide.
Turn off Secure Boot in the BIOS. This will make it easier to install several 3rd party drivers.
I recommend leaving UEFI on. Be aware that to get entries in your bios, you will need to manually add a new entry and select the appropriate *.efi file.
I believe that you need to switch the SATA interface from RAID to AHCI before you're able to install Ubuntu.
(I couldn't get the Ubuntu installer to detect the drive when using RAID but maybe this could be resolved with extra drivers).
WARNING: If Windows was installed with RAID, switching the SATA interface to AHCI will cause Windows to BSOD.
Be very wary of some guides that give instruction on to continue using Windows even after switching to ACHI. You can very easily stop Windows booting properly. Even with recovery points, don't expect this to be easy to undo. I highly recommend that you backup any important data.
trunet has advised me that this solution works.
It is recommended that you have Windows 10 installed first. If you need to reinstall, you shouldn't need a product key as it should be embedded in the BIOS. If necessary, shrink the partition to make room for Ubuntu.
Installing Windows 10 is easy. Simply create a bootable USB using the Windows 10 Media Creation Tool. Get the drivers from Dell's website and get it all working.
Creating a bootable USB Ubuntu installer can be done using Rufus, using these instructions.
I had an intermittent issue where Wifi wouldn't always come back after suspending. I'm yet to resolve this, but running sudo service network-manager restart resolves the problem.
Install Ubuntu 16.04 from the bootable USB.
Go into System Settings.... In Brightness & Lock, change Turn off screen when inactive for: to Never.
Otherwise your screen may get stuck on a black screen (but the system is still responsive).
Go into System Settings... again. In Screen Display, change Scale for menu and title bars: to 1.5.
sudo apt purge 'nvidia.*'
sudo add-apt-repository ppa:graphics-drivers/ppa
sudo apt update
sudo apt install nvidia-367 nvidia-prime
I can't confirm if a newer version works, but 367 worked for me.
Edit: I'm actually using the 378.09 drivers now, but upgraded after following these steps.
sudo prime-select intel
sudo apt-get update
sudo apt-get upgrade
sudo apt-get dist-upgrade
Install v2.0.2 and run the Intel Graphics Update Tool.
Verify that you're using the integrated GPU. Run the following and confirm it returns intel:
prime-select query
We're going to fix 2 things:
- a bug which causes
lspciorlshwto hang - disable gpu-manager, which crashes resuming after suspending when using the integrated GPU
sudo vi /etc/default/grub
Modify GRUB_CMD_LINUX_DEFAULT and add options nogpumanager and acpi_osi=! acpi_osi="Windows 2009".
For example, mine looks like this now:
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nogpumanager acpi_osi=! acpi_osi=\"Windows 2009\""
Regenerate/update:
sudo update-grub
After rebooting, check
- that you can correctly suspend/resume.
- running
lspciorlshwdoesn't crash
These steps here were taken from this guide..
sudo add-apt-repository ppa:bumblebee/testing
sudo apt update
sudo apt install bumblebee
sudo vi /etc/modprobe.d/bumblebee.conf
# 367
blacklist nvidia-367
blacklist nvidia-367-updates
blacklist nvidia-experimental-367
sudo vi /etc/bumblebee/bumblebee.conf
Change to the following:
- Driver=nvidia
- KernelDriver=nvidia-367
- LibraryPath=/usr/lib/nvidia-367:/usr/lib32/nvidia-367
- XorgModulePath=/usr/lib/nvidia-367/xorg,/usr/lib/xorg/modules
Reboot and afterwards confirm the following returns OFF:
cat /proc/acpi/bbswitch
You're able to configure the nvidia settings using the below command:
optirun -b none /usr/bin/nvidia-settings -c :8
Whilst this is running cat /proc/acpi/bbswitch should now return ON.
This is a great little indicator that helps you know if the discrete GPU is being used.
sudo add-apt-repository ppa:nilarimogard/webupd8
sudo apt update
sudo apt install nvidia-power-indicator
Follow this guide. Personally, instead of outline, I selected rectangle.
When the window is maximized and you scroll, you can sometimes see flicker.
The solution was to modify /usr/share/applications/google-chrome.desktop and update to the following:
Exec=/usr/bin/google-chrome-stable --disable-gpu-driver-bug-workarounds --enable-native-gpu-memory-buffers %U
There's some great scripts on a reddit thread which can continously monitor and restore brightness.
Personally, I just use a script that executes the following:
xrandr --output eDP1 --brightness 0.35
Note: Try the script a few times if it doesn't work at first.
I'm intermittently ending up with a permanent black screen when trying to resume using the computer.
I initially thought this was causing the computer to freeze/crash, but ssh sessions from another machine were still responsive.
The following script (even run via an external ssh session) seems to fix the problem:
xrandr -d :0.0 --output eDP1 --off && xrandr -d :0.0 --output eDP1 --auto
Note: Try the script a few times if it doesn't work at first.
This solution seemed to work for me.
Create /usr/share/X11/xorg.conf.d/20-intel.conf and add the following contents:
Section "Device"
Identifier "Intel Graphics"
Driver "intel"
Option "TearFree" "true"
EndSection
Log out and back in to see changes.
sudo apt-get install git build-essential
git clone https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/backport-iwlwifi.git/
cd backport-iwlwifi
make defconfig-iwlwifi-public
sed -i 's/CPTCFG_IWLMVM_VENDOR_CMDS=y/# CPTCFG_IWLMVM_VENDOR_CMDS is not set/' .config
make -j4
sudo make install
Restart, disable securedboot
cd backport-iwlwifi
make clean
make defconfig-iwlwifi-public
make -j4
sudo make install
restart
optirun -b primus -vv env DISPLAY=:8 /opt/VirtualGL/bin/glxspheres64
tham khao Bumblebee-Project/Bumblebee#971
vblank_mode=0 optirun xxx to avoid fps limitation
You can install Bumblebee to Linux Mint 19 as following
- Installation of required packages
sudo add-apt-repository ppa:graphics-drivers/ppa -y sudo apt update sudo apt install bumblebee nvidia-390 primus primus-libs-ia32 linux-headers-$(uname -r) -y 2. Post-installation configuration
Change following lines from
LibraryPath=/usr/lib/nvidia-current:/usr/lib32/nvidia-current XorgModulePath=/usr/lib/nvidia-current/xorg,/usr/lib/xorg/modules to
LibraryPath=/usr/lib/x86_64-linux-gnu:/usr/lib/i386-linux-gnu XorgModulePath=/usr/lib/x86_64-linux-gnu/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules/input in /etc/bumblebee/bumblebee.conf file.
Add following line to /etc/environment file.
__GLVND_DISALLOW_PATCHING=1
Add following lines to /etc/modprobe.d/blacklist-nvidia.conf file.
blacklist nouveau blacklist nvidia blacklist nvidia-drm blacklist nvidia-modeset alias nouveau off alias nvidia-drm off alias nvidia-modeset off 3. Disable gpumanager
You can disable gpumanager with following commands.
echo 'GRUB_CMDLINE_LINUX="$GRUB_CMDLINE_LINUX nogpumanager"' | sudo tee /etc/default/grub.d/nogpumanager.cfg sudo update-grub
3a. Add acpi parameter for some BIOS types with following commands.
echo 'GRUB_CMDLINE_LINUX="$GRUB_CMDLINE_LINUX acpi_osi=! acpi_osi="Windows 2009""' | sudo tee /etc/default/grub.d/nvidia-acpi.cfg sudo update-grub
- Disable unnecessary services
sudo systemctl disable nvidia-fallback.service sudo systemctl disable nvidia-persistenced.service
- Reboot
Tip: You can use optirun -b primus instead of primusrun.