Skip to content
p2pool fork for auroracoin
Python C
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Failed to load latest commit information.
SOAPpy
conf
dev
litecoin_scrypt
nattraverso
p2pool
web-static
wstools
.gitignore
COPYING
Makefile
README.md
configure
fpconst.py
run_p2pool.py
setup.py

README.md

Requirements:

Generic:

  • AuroraCoin >=1.2.0.0
  • Python >=2.6
  • Twisted >=10.0.0
  • python-argparse (for Python =2.6)

Linux:

  • sudo apt-get install python-zope.interface python-twisted python-twisted-web
  • sudo apt-get install python-argparse # if on Python 2.6

Windows:

Running P2Pool:

To use P2Pool, you must be running your own local AuroraCoind. For standard configurations, using P2Pool should be as simple as:

python run_p2pool.py --net auroracoin

Then run your miner program, connecting to 127.0.0.1 on port 12347 with any username and password.

If you are behind a NAT, you should enable TCP port forwarding on your router. Forward port 12348 to the host running P2Pool.

Run for additional options.

python run_p2pool.py --help

Donations towards further development:

1HNeqi3pJRNvXybNX4FKzZgYJsdTSqJTbk

Official wiki :

https://en.bitcoin.it/wiki/P2Pool

Alternate web front end :

Notes for AuroraCoin:

Requirements:

In order to run P2Pool with the AuroraCoin network, you would need to build and install the ltc_scrypt module that includes the scrypt proof of work code that Litecoin uses for hashes.

Linux:

cd litecoin_scrypt
sudo python setup.py install

Windows (mingw):

In bash type this:

cd litecoin_scrypt
C:\Python27\python.exe setup.py build --compile=mingw32 install

Windows (microsoft visual c++)

  • Open visual studio console

In bash type this:

SET VS90COMNTOOLS=%VS110COMNTOOLS%             # For visual c++ 2012
SET VS90COMNTOOLS=%VS100COMNTOOLS%             # For visual c++ 2010
cd litecoin_scrypt
C:\Python27\python.exe setup.py build --compile=mingw32 install

If you run into an error with unrecognized command line option '-mno-cygwin', see this: http://stackoverflow.com/questions/6034390/compiling-with-cython-and-mingw-produces-gcc-error-unrecognized-command-line-o

Running P2Pool:

Run P2Pool with the "--net auroracoin" option. Run your miner program, connecting to 127.0.0.1 on port 12347. Forward port 12348 to the host running P2Pool.

Sponsors:

Thanks to:

  • The Bitcoin Foundation for its generous support of P2Pool
  • The Litecoin Project for its generous donations to P2Pool
Something went wrong with that request. Please try again.