Vote for Tuya Integration New Device Driver Support!

[zlinoliver]

• ASAKUKI Wi-Fi Smart Essential Oil Diffuser Echo Alexa Control
• Feit Electric string lights (Adding String Lights 2/4/3 dic / de viceid)
• Smart Curtain
• BLE Gateway
• Anytek P22 BLE Smart Padlock
• Adaptive Lighting
• Power monitoring smart plug
• Light sensor
• Temp sensor

[vookimedlo]

I vote for the Air Purifier support. Thanks! :)

[pplucky]

Vote for Diffuser (will it also work for Blitzwolf BW-FUN3)?

[kondi06]

i vote to BlitzWolf BW-SH2 4L Smart Air Humidifier

[Ndrinta]

Hosome Air Purifier

[SunilKhusal]

The previous integration for Blitzwolf BW-FUN3 had 7 entities created, but the current only creates one entity. any chance these can be added so we can have better control of the Humidifier. Here is a sample of what it used to be:

We new only get one entity:

[mleon0304]

Please, add support for smartlocks, I want to control my doors using Home Assitant and Tuya

[munichrich1932]

I´d upvote this .. I want to add smartlocks to the house but I need to have them work perfectly with HA before purchase

[Zednine9]

please smart locks!! tuya locks are cheap and awesome with fingerprint/card/password..

[almighty059]

Smart locks and the mesh gateway.

[Benriverato]

Smart Lock Category MK

[alexxx113]

please smart locks!! Product Category: jtmspro

[markusg1234]

Power monitoring for smart power points and smart plugs.
Regards,
markus

[markusg1234]

Can confirm this now works partly with 2021.11.3.
Tested yesterday with a grid connect bunnings smart power point. Long term statistics isn't working as there isn't a Total Consumption so it can't be added to Energy .
Only Current, power and voltage sensors exist.

[Docas09]

Please current, power and voltage

[pbulteel]

I see those were disabled sensors for the plugs that I had. I went in to enable them and they started showing up. Thanks for letting me know @markusg1234

[Docas09]

Thanks for the info,
I've already tested it and it works.
The only problem I encounter is the status change, which is very slow (it takes more than 1 minute)

[andy26nash]

I have a wifi power monitoring device type cz. Picks up power, current and voltage but no Kwh value. Would be great to get the total usage

[rishabmehta7]

BLE GW!!

[DavidFFerreira]

I vote for IR device and Power monitoring smart plug

[Mosoonk]

OK, WAIT, I found https://www.reddit.com/r/homeassistant/comments/nmzwgy/ha_not_picking_up_a_tuya_compatible_ir_controller/ and checked with my universal IR remote in Tuya and sure enough, this works!

To be more clear, a Wifi connected Universal IR Remote added to Tuya as Others>Universal Remote Control works if you create a Scene (Tap-to-Run>Run the Device) for each button....

thanks, that helped me a lot

[schnellecom]

Would love the support for IR devices, as I have my AC connected with an IR bridge (which as far as I know) just creates an AC device in the app and would love to be able to automate it. Somehow the Alexa integration just works with it.

[Beta-Computer]

I would love too see how much power my devices are using in HA

[ardiankr]

OK, WAIT, I found https://www.reddit.com/r/homeassistant/comments/nmzwgy/ha_not_picking_up_a_tuya_compatible_ir_controller/ and checked with my universal IR remote in Tuya and sure enough, this works!

To be more clear, a Wifi connected Universal IR Remote added to Tuya as Others>Universal Remote Control works if you create a Scene (Tap-to-Run>Run the Device) for each button....

Thanks, this trick is great!

[igorsantos07]

The scenes trick is great for IR remoting, but otherwise it's a very tiring task. The IR Remote interface in the app itself needs some revamp, since you can't "design" custom remotes, can't even reorder buttons, not to mention you can't backup/copy remotes, so if you have the same model in multiple rooms, you have to configure it all over again, multiple times.

First-class IR support in HA (activating buttons directly instead of using scenes) would be good addition to all that, I'd say.

I see in the Tuya web debugger that the IR-based "virtual devices" show as follows, all of them at the qt category:

• custom IR controller: 红外其他-学习功能
• TV: 红外电视
• fan: 红外风扇

The actual IR-wifi bridges are also qt, named 智能红外遥控器.

[hACKrus]

IR

[iq85k]

IR Devices Please

[WildeRNS]

Power monitoring smart plug and Smart Curtain, please

[javixuhc]

Smart Curtain

[ismileatyou]

Smart Curtain

[Docas09]

Smart plug current, power and voltage, please

[pbulteel]

smart plug current, power and voltage are already available on HA. The sensors may be disabled and you'll need to enable them. Thanks to @markusg1234 for pointing this out.

[Docas09]

Thanks for the info,
I've already tested it and it works.
The only problem I encounter is the status change, which is very slow (it takes more than 1 minute)

[iculookn]

ASAKUKI Wi-Fi Smart Essential Oil Diffuser Echo Alexa Control
Power monitoring smart plug

[calebwarta]

My defuser from them is working now!

[JoErTo]

Wifi Scale would be a great.

[station4automation]

Yes, would love to integrate my Nedis WiFi Smart Scale :)

[Sthopeless]

wifi scales & doorlocks

[b3nnyk22]

Dehumidifiers. I imagine they're similar to a Humidifier but my Kogan smart dehumidifier doesn't show up with this integration.

[jjmuriel]

Smart Curtain

[eldelapura]

Yes Plss!!! Smart Curtain (clkg)

[inreinbek]

Also this one
Product Name RJ-Curtain switch
Product Category qt

[cvroque]

Alarms. I have an RF gateway and it shows some of the sensors but there's no way to arm/disarm the alarm.

[johnw230873]

Yep, I have a Home Security System which would be great to link into Home assistant.
If it helps
Device Information
Product Name Cellular+WiFi Alarm Pro
Device ID eb32aa02b715f52fc8ulmu
Product Category mal

[clivetimmins]

I want this too my doorbell works like a bridge for 433mhz door sensors

Product name: CPVAN Wi-Fi Alarm with Doorbell Pro
Device ID: 86178520e8db84c78362
Product category: mal

[kraouette]

SWDK ZDG300s Smart Sweeping Robot (global, not the Xiaomi version)

[kefor]

Please Add:
Product Name:
Wireless Doorbell
Device ID:
bfac44a5128b32f209vff7
Product Category:
wxml

Standard Codes(Sets)
`

Code	Type	Values
doorbell_ring_value	Integer	{ "unit": "", "min": 0, "max": 32, "scale": 0, "step": 1 }
doorbell_volume_value	Integer	{ "min": 0, "max": 100, "scale": 0, "step": 1 }
switch_night_light	Boolean	"{true,false}"
alarm_propel_switch	Boolean	"{true,false}"
doorbell_call	Integer	{ "min": 1, "max": 255, "scale": 0, "step": 1 }

`

The Product is traded by the brand Metzler https://edelstahl-tuerklingel.de/Smarte-Tuerklingel-Weiterleitung-Universal-Set-mit-Smartphone-App-Alexa-kompatibel and easy to install and use device to change a conservative doorbell into a smart one.

[juanesf]

• ASAKUKI Wi-Fi Smart Essential Oil Diffuser Echo Alexa Control
• Feit Electric string lights (Adding String Lights 2/4/3 dic / de viceid)
• Smart Curtain
• BLE Gateway
• Anytek P22 BLE Smart Padlock
• Adaptive Lighting
• Power monitoring smart plug
• Light sensor
• Temp sensor

[chuckie007]

Another vote for a doorbell, specifically the Self-Powered Wireless Doorbell G6L. Great little button, needs no battery, would love to be able to have it trigger automations.

[botaneta]

Please add AC charger for electric vehicle

{
"result": {
"category": "qccdz",
"functions": [
{
"code": "work_mode",
"lang_config": {
"charge_energy": "Charge base on energy",
"charge_now": "Charging now",
"charge_pct": "Charge base on Percentage",
"charge_schedule": "Charge base on schedule"
},
"name": "Work Mode",
"type": "Enum",
"values": "{"range":["charge_now","charge_pct","charge_energy","charge_schedule"]}"
},
{
"code": "clear_energy",
"lang_config": {
"false": "OFF",
"true": "ON"
},
"name": "Clear Energy",
"type": "Boolean",
"values": "{}"
},
{
"code": "switch",
"lang_config": {
"false": "OFF",
"true": "ON"
},
"name": "Switch",
"type": "Boolean",
"values": "{}"
}
],
"status": [
{
"code": "work_state",
"lang_config": {
"charger_charging": "Charger Charging",
"charger_end": "Charge finished",
"charger_fault": "Charge with fault",
"charger_free": "Charger Free",
"charger_free_fault": "Free with fault",
"charger_insert": "Charger Inserted",
"charger_pause": "Charger Pause",
"charger_wait": "Charger Wait"
},
"name": "Work State",
"type": "Enum",
"values": "{"range":["charger_free","charger_insert","charger_free_fault","charger_wait","charger_charging","charger_pause","charger_end","charger_fault"]}"
},
{
"code": "work_mode",
"lang_config": {
"charge_energy": "Charge base on energy",
"charge_now": "Charging now",
"charge_pct": "Charge base on Percentage",
"charge_schedule": "Charge base on schedule"
},
"name": "Work Mode",
"type": "Enum",
"values": "{"range":["charge_now","charge_pct","charge_energy","charge_schedule"]}"
},
{
"code": "balance_energy",
"lang_config": {
"unit": "kWh"
},
"name": "Balance Energy",
"type": "Integer",
"values": "{"unit":"kW·h","min":0,"max":99999999,"scale":3,"step":1}"
},
{
"code": "clear_energy",
"lang_config": {
"false": "OFF",
"true": "ON"
},
"name": "Clear Energy",
"type": "Boolean",
"values": "{}"
},
{
"code": "switch",
"lang_config": {
"false": "OFF",
"true": "ON"
},
"name": "Switch",
"type": "Boolean",
"values": "{}"
},
{
"code": "charge_energy_once",
"lang_config": {
"unit": "kWh"
},
"name": "Once Charge Energy",
"type": "Integer",
"values": "{"unit":"kW·h","min":1,"max":999999,"scale":2,"step":1}"
}
]
},
"success": true,
"t": 1686076376192,
"tid": "8e1e6c64049811eeac8032ebdb7f4f6c"
}

[FancyNerd92]

PH / ORP sensors for water monitors!!! We are getting only Temperature!

[matthewnicholas]

support for the night light feature of these tuya devices would be appreciated:
https://www.amazon.com/dp/B0BL742577?psc=1&ref=ppx_yo2ov_dt_b_product_details

seems like an easy add for category "xdd" as it looks like it's just an additional call to the "white_switch" dpcode bool to change between the white down light and the colored side ring but i'm not familiar enough with either platform to get it done

[Dep1911]

Please Add:
Valve Controller. Used as an irrigation system.
Product Name
S-tap
Device ID
bf65710822e467f7743axx
Product Category
sfkzq

[urbmar]

Please add full support for:

    "name": "SmartDoorBell",
    "model": "86706",
    "category": "sp",
    "product_id": "obtloc9hkl46jjgg",
    "product_name": "Security Camera",

[stub2k2]

BLE Gateway, Though I might need support for Smart Water Valves first?

[djaksic84]

Please add smart motorized handles for valves.

[morenod]

Silk Air Connect AC

I can see it on HASS, but no entities:

[AlexBedeker-1]

I've got a PIR with Lux sensor. Working fine in Tuya Smart app (both sensors working).
But in Home Assistant only a PIR sensor... no lux sensor found..
Would love to have a working integration of Pir AND Lux sensor...

[haleksandrov]

Smart curtain robot (kcy0x4pi)

[lory256]

HI. Can be added a heat recovery ventilator?
Product Name Ventoxx Harmony
Device ID bfe9b6954931eef37ekycl
Product Category qt

"endpoint": "https://openapi.tuyaeu.com",
"auth_type": 0,
"country_code": "40",
"app_type": "tuyaSmart",
"mqtt_connected": true,
"disabled_by": null,
"disabled_polling": false,
"name": "Ventoxx Bathroom",
"model": "2.0.0.1",
"category": "qt",
"product_id": "hrzbmbcjambqizex",
"product_name": "Ventoxx Harmony",
"function": {
  "ModeFull": {
    "type": "Enum",
    "value": {
      "range": [
        "PowerOff",
        "Recuperation1In",
        "Recuperation1Out",
        "Recuperation2In",
        "Recuperation2Out",
        "Recuperation3In",
        "Recuperation3Out",
        "Normal1In",
        "Normal1Out",
        "Normal2In",
        "Normal2Out",
        "Normal3In",
        "Normal3Out",
        "AiringIn",
        "AiringOut"
      ]
    }
  },
  "IrCommand": {
    "type": "Enum",
    "value": {
      "range": [
        "Power",
        "Buzzer",
        "Speed_1",
        "Speed_3",
        "Brightness_plus",
        "Brightness_minus",
        "Airing",
        "Direction_in",
        "Direction_out",
        "Speed_2"
      ]
    }
  },
  "Power": {
    "type": "Boolean",
    "value": {}
  }
},
"status_range": {
  "Mode": {
    "type": "Enum",
    "value": {
      "range": [
        "Recuperation",
        "Normal",
        "Airing"
      ]
    }
  },
  "Speed": {
    "type": "Enum",
    "value": {
      "range": [
        "0",
        "1",
        "2",
        "3"
      ]
    }
  },
  "Direction": {
    "type": "Enum",
    "value": {
      "range": [
        "In",
        "Out"
      ]
    }
  },
  "Display": {
    "type": "Enum",
    "value": {
      "range": [
        "Off",
        "On"
      ]
    }
  },
  "Buzzer": {
    "type": "Enum",
    "value": {
      "range": [
        "Off",
        "On"
      ]
    }
  },
  "ModeFull": {
    "type": "Enum",
    "value": {
      "range": [
        "PowerOff",
        "Recuperation1In",
        "Recuperation1Out",
        "Recuperation2In",
        "Recuperation2Out",
        "Recuperation3In",
        "Recuperation3Out",
        "Normal1In",
        "Normal1Out",
        "Normal2In",
        "Normal2Out",
        "Normal3In",
        "Normal3Out",
        "AiringIn",
        "AiringOut"
      ]
    }
  },
  "Power": {
    "type": "Boolean",
    "value": {}
  }
},
"status": {
  "Mode": "Recuperation",
  "Speed": 2,
  "Direction": "In",
  "Display": "On",
  "Buzzer": "On",
  "ModeFull": "Recuperation2In",
  "Power": true
},
"home_assistant": {
  "name": "Ventoxx Bathroom",
  "name_by_user": null,
  "disabled": false,
  "disabled_by": null,
  "entities": []
}

}

[markoopapa]

iha the Ventoxx Twist model, if anyone knows how I can make it smart, thank you

[andretoma]

• Product Name: Ultrasonic level sensor
  Product Category: ywcgq