Skip to content

Synology

Jump to bottom
Tommy Mikkelsen edited this page Apr 23, 2016 · 19 revisions

WTInstaller (WebTools Installer) for Synology NAS

To get you started, here are the steps you need to perform to install the WebTools Installer (WTInstaller) on your Synology NAS

  1. Download the released, usually latest, version of the package (.spk)
  2. Save it on your computer
  3. Open your browser and log into your NAS as you always do
  4. Open Package Center.
  5. Click on "Settings"
  6. Under "General", "Trust Level", Click "Any Publisher" (This is necessary because Synology does not support this package. You may set it back to its previous setting after installation)

Click "Manual Install"

synology-webtools-1

"Browse" your computer for the file "Synology_Inst-WebTools_X.X.spk"

synology-webtools-2

Click "Next" and continue clicking "Next" until DSM tells you installation is complete.

synology-webtools-3 Start Plex if it is not already running.

You may now access WebTools directly from the Synology start menu.

Firewall Considerations:

If you actively use your firewall to control access, you will need to create active rules to permit access. Rule definitions have been provided for you. These are accessible in the normal Synology Firewall tool under the Built-in choices.

This plugin is in no way associated with Plex Inc.. It's merely a humble plugin, trying to improve on perfection. Use of this plugin is at own risk, no responsibility is taken from either Plex Inc.. or the developers of this plugin

WTInstaller Wiki

Clone this wiki locally