zz_healthcheck_types.go

/*
Copyright 2021 The Crossplane Authors.

Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/

// Code generated by upjet. DO NOT EDIT.

package v1beta1

import (
	metav1 "k8s.io/apimachinery/pkg/apis/meta/v1"
	"k8s.io/apimachinery/pkg/runtime/schema"

	v1 "github.com/crossplane/crossplane-runtime/apis/common/v1"
)

type GRPCHealthCheckObservation struct {
}

type GRPCHealthCheckParameters struct {

	// The gRPC service name for the health check.
	// The value of grpcServiceName has the following meanings by convention:
	// +kubebuilder:validation:Optional
	GRPCServiceName *string `json:"grpcServiceName,omitempty" tf:"grpc_service_name,omitempty"`

	// The port number for the health check request.
	// Must be specified if portName and portSpecification are not set
	// or if port_specification is USE_FIXED_PORT. Valid values are 1 through 65535.
	// +kubebuilder:validation:Optional
	Port *float64 `json:"port,omitempty" tf:"port,omitempty"`

	// Port name as defined in InstanceGroup#NamedPort#name. If both port and
	// port_name are defined, port takes precedence.
	// +kubebuilder:validation:Optional
	PortName *string `json:"portName,omitempty" tf:"port_name,omitempty"`

	// Specifies how port is selected for health checking, can be one of the
	// following values:
	// +kubebuilder:validation:Optional
	PortSpecification *string `json:"portSpecification,omitempty" tf:"port_specification,omitempty"`
}

type HTTPHealthCheckObservation struct {
}

type HTTPHealthCheckParameters struct {

	// The value of the host header in the HTTP health check request.
	// If left empty (default value), the public IP on behalf of which this health
	// check is performed will be used.
	// +kubebuilder:validation:Optional
	Host *string `json:"host,omitempty" tf:"host,omitempty"`

	// The TCP port number for the HTTP health check request.
	// The default value is 80.
	// +kubebuilder:validation:Optional
	Port *float64 `json:"port,omitempty" tf:"port,omitempty"`

	// Port name as defined in InstanceGroup#NamedPort#name. If both port and
	// port_name are defined, port takes precedence.
	// +kubebuilder:validation:Optional
	PortName *string `json:"portName,omitempty" tf:"port_name,omitempty"`

	// Specifies how port is selected for health checking, can be one of the
	// following values:
	// +kubebuilder:validation:Optional
	PortSpecification *string `json:"portSpecification,omitempty" tf:"port_specification,omitempty"`

	// Specifies the type of proxy header to append before sending data to the
	// backend.
	// Default value is NONE.
	// Possible values are NONE and PROXY_V1.
	// +kubebuilder:validation:Optional
	ProxyHeader *string `json:"proxyHeader,omitempty" tf:"proxy_header,omitempty"`

	// The request path of the HTTP health check request.
	// The default value is /.
	// +kubebuilder:validation:Optional
	RequestPath *string `json:"requestPath,omitempty" tf:"request_path,omitempty"`

	// The bytes to match against the beginning of the response data. If left empty
	// (the default value), any response will indicate health. The response data
	// can only be ASCII.
	// +kubebuilder:validation:Optional
	Response *string `json:"response,omitempty" tf:"response,omitempty"`
}

type HTTPSHealthCheckObservation struct {
}

type HTTPSHealthCheckParameters struct {

	// The value of the host header in the HTTPS health check request.
	// If left empty (default value), the public IP on behalf of which this health
	// check is performed will be used.
	// +kubebuilder:validation:Optional
	Host *string `json:"host,omitempty" tf:"host,omitempty"`

	// The TCP port number for the HTTPS health check request.
	// The default value is 443.
	// +kubebuilder:validation:Optional
	Port *float64 `json:"port,omitempty" tf:"port,omitempty"`

	// Port name as defined in InstanceGroup#NamedPort#name. If both port and
	// port_name are defined, port takes precedence.
	// +kubebuilder:validation:Optional
	PortName *string `json:"portName,omitempty" tf:"port_name,omitempty"`

	// Specifies how port is selected for health checking, can be one of the
	// following values:
	// +kubebuilder:validation:Optional
	PortSpecification *string `json:"portSpecification,omitempty" tf:"port_specification,omitempty"`

	// Specifies the type of proxy header to append before sending data to the
	// backend.
	// Default value is NONE.
	// Possible values are NONE and PROXY_V1.
	// +kubebuilder:validation:Optional
	ProxyHeader *string `json:"proxyHeader,omitempty" tf:"proxy_header,omitempty"`

	// The request path of the HTTPS health check request.
	// The default value is /.
	// +kubebuilder:validation:Optional
	RequestPath *string `json:"requestPath,omitempty" tf:"request_path,omitempty"`

	// The bytes to match against the beginning of the response data. If left empty
	// (the default value), any response will indicate health. The response data
	// can only be ASCII.
	// +kubebuilder:validation:Optional
	Response *string `json:"response,omitempty" tf:"response,omitempty"`
}

type HealthCheckLogConfigObservation struct {
}

type HealthCheckLogConfigParameters struct {

	// Indicates whether or not to export logs. This is false by default,
	// which means no health check logging will be done.
	// +kubebuilder:validation:Optional
	Enable *bool `json:"enable,omitempty" tf:"enable,omitempty"`
}

type HealthCheckObservation struct {

	// Creation timestamp in RFC3339 text format.
	CreationTimestamp *string `json:"creationTimestamp,omitempty" tf:"creation_timestamp,omitempty"`

	// an identifier for the resource with format projects/{{project}}/global/healthChecks/{{name}}
	ID *string `json:"id,omitempty" tf:"id,omitempty"`

	// The URI of the created resource.
	SelfLink *string `json:"selfLink,omitempty" tf:"self_link,omitempty"`

	// The type of the health check. One of HTTP, HTTPS, TCP, or SSL.
	Type *string `json:"type,omitempty" tf:"type,omitempty"`
}

type HealthCheckParameters struct {

	// How often (in seconds) to send a health check. The default value is 5
	// seconds.
	// +kubebuilder:validation:Optional
	CheckIntervalSec *float64 `json:"checkIntervalSec,omitempty" tf:"check_interval_sec,omitempty"`

	// An optional description of this resource. Provide this property when
	// you create the resource.
	// +kubebuilder:validation:Optional
	Description *string `json:"description,omitempty" tf:"description,omitempty"`

	// A nested object resource
	// Structure is documented below.
	// +kubebuilder:validation:Optional
	GRPCHealthCheck []GRPCHealthCheckParameters `json:"grpcHealthCheck,omitempty" tf:"grpc_health_check,omitempty"`

	// A nested object resource
	// Structure is documented below.
	// +kubebuilder:validation:Optional
	HTTPHealthCheck []HTTPHealthCheckParameters `json:"httpHealthCheck,omitempty" tf:"http_health_check,omitempty"`

	// A nested object resource
	// Structure is documented below.
	// +kubebuilder:validation:Optional
	HTTPSHealthCheck []HTTPSHealthCheckParameters `json:"httpsHealthCheck,omitempty" tf:"https_health_check,omitempty"`

	// A so-far unhealthy instance will be marked healthy after this many
	// consecutive successes. The default value is 2.
	// +kubebuilder:validation:Optional
	HealthyThreshold *float64 `json:"healthyThreshold,omitempty" tf:"healthy_threshold,omitempty"`

	// A nested object resource
	// Structure is documented below.
	// +kubebuilder:validation:Optional
	Http2HealthCheck []Http2HealthCheckParameters `json:"http2HealthCheck,omitempty" tf:"http2_health_check,omitempty"`

	// Configure logging on this health check.
	// Structure is documented below.
	// +kubebuilder:validation:Optional
	LogConfig []HealthCheckLogConfigParameters `json:"logConfig,omitempty" tf:"log_config,omitempty"`

	// The ID of the project in which the resource belongs.
	// If it is not provided, the provider project is used.
	// +kubebuilder:validation:Optional
	Project *string `json:"project,omitempty" tf:"project,omitempty"`

	// A nested object resource
	// Structure is documented below.
	// +kubebuilder:validation:Optional
	SSLHealthCheck []SSLHealthCheckParameters `json:"sslHealthCheck,omitempty" tf:"ssl_health_check,omitempty"`

	// A nested object resource
	// Structure is documented below.
	// +kubebuilder:validation:Optional
	TCPHealthCheck []TCPHealthCheckParameters `json:"tcpHealthCheck,omitempty" tf:"tcp_health_check,omitempty"`

	// How long (in seconds) to wait before claiming failure.
	// The default value is 5 seconds.  It is invalid for timeoutSec to have
	// greater value than checkIntervalSec.
	// +kubebuilder:validation:Optional
	TimeoutSec *float64 `json:"timeoutSec,omitempty" tf:"timeout_sec,omitempty"`

	// A so-far healthy instance will be marked unhealthy after this many
	// consecutive failures. The default value is 2.
	// +kubebuilder:validation:Optional
	UnhealthyThreshold *float64 `json:"unhealthyThreshold,omitempty" tf:"unhealthy_threshold,omitempty"`
}

type Http2HealthCheckObservation struct {
}

type Http2HealthCheckParameters struct {

	// The value of the host header in the HTTP2 health check request.
	// If left empty (default value), the public IP on behalf of which this health
	// check is performed will be used.
	// +kubebuilder:validation:Optional
	Host *string `json:"host,omitempty" tf:"host,omitempty"`

	// The TCP port number for the HTTP2 health check request.
	// The default value is 443.
	// +kubebuilder:validation:Optional
	Port *float64 `json:"port,omitempty" tf:"port,omitempty"`

	// Port name as defined in InstanceGroup#NamedPort#name. If both port and
	// port_name are defined, port takes precedence.
	// +kubebuilder:validation:Optional
	PortName *string `json:"portName,omitempty" tf:"port_name,omitempty"`

	// Specifies how port is selected for health checking, can be one of the
	// following values:
	// +kubebuilder:validation:Optional
	PortSpecification *string `json:"portSpecification,omitempty" tf:"port_specification,omitempty"`

	// Specifies the type of proxy header to append before sending data to the
	// backend.
	// Default value is NONE.
	// Possible values are NONE and PROXY_V1.
	// +kubebuilder:validation:Optional
	ProxyHeader *string `json:"proxyHeader,omitempty" tf:"proxy_header,omitempty"`

	// The request path of the HTTP2 health check request.
	// The default value is /.
	// +kubebuilder:validation:Optional
	RequestPath *string `json:"requestPath,omitempty" tf:"request_path,omitempty"`

	// The bytes to match against the beginning of the response data. If left empty
	// (the default value), any response will indicate health. The response data
	// can only be ASCII.
	// +kubebuilder:validation:Optional
	Response *string `json:"response,omitempty" tf:"response,omitempty"`
}

type SSLHealthCheckObservation struct {
}

type SSLHealthCheckParameters struct {

	// The TCP port number for the SSL health check request.
	// The default value is 443.
	// +kubebuilder:validation:Optional
	Port *float64 `json:"port,omitempty" tf:"port,omitempty"`

	// Port name as defined in InstanceGroup#NamedPort#name. If both port and
	// port_name are defined, port takes precedence.
	// +kubebuilder:validation:Optional
	PortName *string `json:"portName,omitempty" tf:"port_name,omitempty"`

	// Specifies how port is selected for health checking, can be one of the
	// following values:
	// +kubebuilder:validation:Optional
	PortSpecification *string `json:"portSpecification,omitempty" tf:"port_specification,omitempty"`

	// Specifies the type of proxy header to append before sending data to the
	// backend.
	// Default value is NONE.
	// Possible values are NONE and PROXY_V1.
	// +kubebuilder:validation:Optional
	ProxyHeader *string `json:"proxyHeader,omitempty" tf:"proxy_header,omitempty"`

	// The application data to send once the SSL connection has been
	// established (default value is empty). If both request and response are
	// empty, the connection establishment alone will indicate health. The request
	// data can only be ASCII.
	// +kubebuilder:validation:Optional
	Request *string `json:"request,omitempty" tf:"request,omitempty"`

	// The bytes to match against the beginning of the response data. If left empty
	// (the default value), any response will indicate health. The response data
	// can only be ASCII.
	// +kubebuilder:validation:Optional
	Response *string `json:"response,omitempty" tf:"response,omitempty"`
}

type TCPHealthCheckObservation struct {
}

type TCPHealthCheckParameters struct {

	// The TCP port number for the TCP health check request.
	// The default value is 443.
	// +kubebuilder:validation:Optional
	Port *float64 `json:"port,omitempty" tf:"port,omitempty"`

	// Port name as defined in InstanceGroup#NamedPort#name. If both port and
	// port_name are defined, port takes precedence.
	// +kubebuilder:validation:Optional
	PortName *string `json:"portName,omitempty" tf:"port_name,omitempty"`

	// Specifies how port is selected for health checking, can be one of the
	// following values:
	// +kubebuilder:validation:Optional
	PortSpecification *string `json:"portSpecification,omitempty" tf:"port_specification,omitempty"`

	// Specifies the type of proxy header to append before sending data to the
	// backend.
	// Default value is NONE.
	// Possible values are NONE and PROXY_V1.
	// +kubebuilder:validation:Optional
	ProxyHeader *string `json:"proxyHeader,omitempty" tf:"proxy_header,omitempty"`

	// The application data to send once the TCP connection has been
	// established (default value is empty). If both request and response are
	// empty, the connection establishment alone will indicate health. The request
	// data can only be ASCII.
	// +kubebuilder:validation:Optional
	Request *string `json:"request,omitempty" tf:"request,omitempty"`

	// The bytes to match against the beginning of the response data. If left empty
	// (the default value), any response will indicate health. The response data
	// can only be ASCII.
	// +kubebuilder:validation:Optional
	Response *string `json:"response,omitempty" tf:"response,omitempty"`
}

// HealthCheckSpec defines the desired state of HealthCheck
type HealthCheckSpec struct {
	v1.ResourceSpec `json:",inline"`
	ForProvider     HealthCheckParameters `json:"forProvider"`
}

// HealthCheckStatus defines the observed state of HealthCheck.
type HealthCheckStatus struct {
	v1.ResourceStatus `json:",inline"`
	AtProvider        HealthCheckObservation `json:"atProvider,omitempty"`
}

// +kubebuilder:object:root=true

// HealthCheck is the Schema for the HealthChecks API. Health Checks determine whether instances are responsive and able to do work.
// +kubebuilder:printcolumn:name="READY",type="string",JSONPath=".status.conditions[?(@.type=='Ready')].status"
// +kubebuilder:printcolumn:name="SYNCED",type="string",JSONPath=".status.conditions[?(@.type=='Synced')].status"
// +kubebuilder:printcolumn:name="EXTERNAL-NAME",type="string",JSONPath=".metadata.annotations.crossplane\\.io/external-name"
// +kubebuilder:printcolumn:name="AGE",type="date",JSONPath=".metadata.creationTimestamp"
// +kubebuilder:subresource:status
// +kubebuilder:resource:scope=Cluster,categories={crossplane,managed,gcp}
type HealthCheck struct {
	metav1.TypeMeta   `json:",inline"`
	metav1.ObjectMeta `json:"metadata,omitempty"`
	Spec              HealthCheckSpec   `json:"spec"`
	Status            HealthCheckStatus `json:"status,omitempty"`
}

// +kubebuilder:object:root=true

// HealthCheckList contains a list of HealthChecks
type HealthCheckList struct {
	metav1.TypeMeta `json:",inline"`
	metav1.ListMeta `json:"metadata,omitempty"`
	Items           []HealthCheck `json:"items"`
}

// Repository type metadata.
var (
	HealthCheck_Kind             = "HealthCheck"
	HealthCheck_GroupKind        = schema.GroupKind{Group: CRDGroup, Kind: HealthCheck_Kind}.String()
	HealthCheck_KindAPIVersion   = HealthCheck_Kind + "." + CRDGroupVersion.String()
	HealthCheck_GroupVersionKind = CRDGroupVersion.WithKind(HealthCheck_Kind)
)

func init() {
	SchemeBuilder.Register(&HealthCheck{}, &HealthCheckList{})
}