zz_router_types.go

// SPDX-FileCopyrightText: 2023 The Crossplane Authors <https://crossplane.io>
//
// SPDX-License-Identifier: Apache-2.0

/*
Copyright 2021 The Crossplane Authors.

Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at

    http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/

// Code generated by upjet. DO NOT EDIT.

package v1beta1

import (
	metav1 "k8s.io/apimachinery/pkg/apis/meta/v1"
	"k8s.io/apimachinery/pkg/runtime/schema"

	v1 "github.com/crossplane/crossplane-runtime/apis/common/v1"
)

type AdvertisedIPRangesInitParameters struct {

	// An optional description of this resource.
	Description *string `json:"description,omitempty" tf:"description,omitempty"`

	// The IP range to advertise. The value must be a
	// CIDR-formatted string.
	Range *string `json:"range,omitempty" tf:"range,omitempty"`
}

type AdvertisedIPRangesObservation struct {

	// An optional description of this resource.
	Description *string `json:"description,omitempty" tf:"description,omitempty"`

	// The IP range to advertise. The value must be a
	// CIDR-formatted string.
	Range *string `json:"range,omitempty" tf:"range,omitempty"`
}

type AdvertisedIPRangesParameters struct {

	// An optional description of this resource.
	// +kubebuilder:validation:Optional
	Description *string `json:"description,omitempty" tf:"description,omitempty"`

	// The IP range to advertise. The value must be a
	// CIDR-formatted string.
	// +kubebuilder:validation:Optional
	Range *string `json:"range" tf:"range,omitempty"`
}

type BGPInitParameters struct {

	// User-specified flag to indicate which mode to use for advertisement.
	// Default value is DEFAULT.
	// Possible values are: DEFAULT, CUSTOM.
	AdvertiseMode *string `json:"advertiseMode,omitempty" tf:"advertise_mode,omitempty"`

	// User-specified list of prefix groups to advertise in custom mode.
	// This field can only be populated if advertiseMode is CUSTOM and
	// is advertised to all peers of the router. These groups will be
	// advertised in addition to any specified prefixes. Leave this field
	// blank to advertise no custom groups.
	// This enum field has the one valid value: ALL_SUBNETS
	AdvertisedGroups []*string `json:"advertisedGroups,omitempty" tf:"advertised_groups,omitempty"`

	// User-specified list of individual IP ranges to advertise in
	// custom mode. This field can only be populated if advertiseMode
	// is CUSTOM and is advertised to all peers of the router. These IP
	// ranges will be advertised in addition to any specified groups.
	// Leave this field blank to advertise no custom IP ranges.
	// Structure is documented below.
	AdvertisedIPRanges []AdvertisedIPRangesInitParameters `json:"advertisedIpRanges,omitempty" tf:"advertised_ip_ranges,omitempty"`

	// Local BGP Autonomous System Number (ASN). Must be an RFC6996
	// private ASN, either 16-bit or 32-bit. The value will be fixed for
	// this router resource. All VPN tunnels that link to this router
	// will have the same local ASN.
	Asn *float64 `json:"asn,omitempty" tf:"asn,omitempty"`

	// The interval in seconds between BGP keepalive messages that are sent
	// to the peer. Hold time is three times the interval at which keepalive
	// messages are sent, and the hold time is the maximum number of seconds
	// allowed to elapse between successive keepalive messages that BGP
	// receives from a peer.
	// BGP will use the smaller of either the local hold time value or the
	// peer's hold time value as the hold time for the BGP connection
	// between the two peers. If set, this value must be between 20 and 60.
	// The default is 20.
	KeepaliveInterval *float64 `json:"keepaliveInterval,omitempty" tf:"keepalive_interval,omitempty"`
}

type BGPObservation struct {

	// User-specified flag to indicate which mode to use for advertisement.
	// Default value is DEFAULT.
	// Possible values are: DEFAULT, CUSTOM.
	AdvertiseMode *string `json:"advertiseMode,omitempty" tf:"advertise_mode,omitempty"`

	// User-specified list of prefix groups to advertise in custom mode.
	// This field can only be populated if advertiseMode is CUSTOM and
	// is advertised to all peers of the router. These groups will be
	// advertised in addition to any specified prefixes. Leave this field
	// blank to advertise no custom groups.
	// This enum field has the one valid value: ALL_SUBNETS
	AdvertisedGroups []*string `json:"advertisedGroups,omitempty" tf:"advertised_groups,omitempty"`

	// User-specified list of individual IP ranges to advertise in
	// custom mode. This field can only be populated if advertiseMode
	// is CUSTOM and is advertised to all peers of the router. These IP
	// ranges will be advertised in addition to any specified groups.
	// Leave this field blank to advertise no custom IP ranges.
	// Structure is documented below.
	AdvertisedIPRanges []AdvertisedIPRangesObservation `json:"advertisedIpRanges,omitempty" tf:"advertised_ip_ranges,omitempty"`

	// Local BGP Autonomous System Number (ASN). Must be an RFC6996
	// private ASN, either 16-bit or 32-bit. The value will be fixed for
	// this router resource. All VPN tunnels that link to this router
	// will have the same local ASN.
	Asn *float64 `json:"asn,omitempty" tf:"asn,omitempty"`

	// The interval in seconds between BGP keepalive messages that are sent
	// to the peer. Hold time is three times the interval at which keepalive
	// messages are sent, and the hold time is the maximum number of seconds
	// allowed to elapse between successive keepalive messages that BGP
	// receives from a peer.
	// BGP will use the smaller of either the local hold time value or the
	// peer's hold time value as the hold time for the BGP connection
	// between the two peers. If set, this value must be between 20 and 60.
	// The default is 20.
	KeepaliveInterval *float64 `json:"keepaliveInterval,omitempty" tf:"keepalive_interval,omitempty"`
}

type BGPParameters struct {

	// User-specified flag to indicate which mode to use for advertisement.
	// Default value is DEFAULT.
	// Possible values are: DEFAULT, CUSTOM.
	// +kubebuilder:validation:Optional
	AdvertiseMode *string `json:"advertiseMode,omitempty" tf:"advertise_mode,omitempty"`

	// User-specified list of prefix groups to advertise in custom mode.
	// This field can only be populated if advertiseMode is CUSTOM and
	// is advertised to all peers of the router. These groups will be
	// advertised in addition to any specified prefixes. Leave this field
	// blank to advertise no custom groups.
	// This enum field has the one valid value: ALL_SUBNETS
	// +kubebuilder:validation:Optional
	AdvertisedGroups []*string `json:"advertisedGroups,omitempty" tf:"advertised_groups,omitempty"`

	// User-specified list of individual IP ranges to advertise in
	// custom mode. This field can only be populated if advertiseMode
	// is CUSTOM and is advertised to all peers of the router. These IP
	// ranges will be advertised in addition to any specified groups.
	// Leave this field blank to advertise no custom IP ranges.
	// Structure is documented below.
	// +kubebuilder:validation:Optional
	AdvertisedIPRanges []AdvertisedIPRangesParameters `json:"advertisedIpRanges,omitempty" tf:"advertised_ip_ranges,omitempty"`

	// Local BGP Autonomous System Number (ASN). Must be an RFC6996
	// private ASN, either 16-bit or 32-bit. The value will be fixed for
	// this router resource. All VPN tunnels that link to this router
	// will have the same local ASN.
	// +kubebuilder:validation:Optional
	Asn *float64 `json:"asn" tf:"asn,omitempty"`

	// The interval in seconds between BGP keepalive messages that are sent
	// to the peer. Hold time is three times the interval at which keepalive
	// messages are sent, and the hold time is the maximum number of seconds
	// allowed to elapse between successive keepalive messages that BGP
	// receives from a peer.
	// BGP will use the smaller of either the local hold time value or the
	// peer's hold time value as the hold time for the BGP connection
	// between the two peers. If set, this value must be between 20 and 60.
	// The default is 20.
	// +kubebuilder:validation:Optional
	KeepaliveInterval *float64 `json:"keepaliveInterval,omitempty" tf:"keepalive_interval,omitempty"`
}

type RouterInitParameters struct {

	// BGP information specific to this router.
	// Structure is documented below.
	BGP []BGPInitParameters `json:"bgp,omitempty" tf:"bgp,omitempty"`

	// An optional description of this resource.
	Description *string `json:"description,omitempty" tf:"description,omitempty"`

	// Indicates if a router is dedicated for use with encrypted VLAN
	// attachments (interconnectAttachments).
	EncryptedInterconnectRouter *bool `json:"encryptedInterconnectRouter,omitempty" tf:"encrypted_interconnect_router,omitempty"`

	// The ID of the project in which the resource belongs.
	// If it is not provided, the provider project is used.
	Project *string `json:"project,omitempty" tf:"project,omitempty"`
}

type RouterObservation struct {

	// BGP information specific to this router.
	// Structure is documented below.
	BGP []BGPObservation `json:"bgp,omitempty" tf:"bgp,omitempty"`

	// Creation timestamp in RFC3339 text format.
	CreationTimestamp *string `json:"creationTimestamp,omitempty" tf:"creation_timestamp,omitempty"`

	// An optional description of this resource.
	Description *string `json:"description,omitempty" tf:"description,omitempty"`

	// Indicates if a router is dedicated for use with encrypted VLAN
	// attachments (interconnectAttachments).
	EncryptedInterconnectRouter *bool `json:"encryptedInterconnectRouter,omitempty" tf:"encrypted_interconnect_router,omitempty"`

	// an identifier for the resource with format projects/{{project}}/regions/{{region}}/routers/{{name}}
	ID *string `json:"id,omitempty" tf:"id,omitempty"`

	// A reference to the network to which this router belongs.
	Network *string `json:"network,omitempty" tf:"network,omitempty"`

	// The ID of the project in which the resource belongs.
	// If it is not provided, the provider project is used.
	Project *string `json:"project,omitempty" tf:"project,omitempty"`

	// Region where the router resides.
	Region *string `json:"region,omitempty" tf:"region,omitempty"`

	// The URI of the created resource.
	SelfLink *string `json:"selfLink,omitempty" tf:"self_link,omitempty"`
}

type RouterParameters struct {

	// BGP information specific to this router.
	// Structure is documented below.
	// +kubebuilder:validation:Optional
	BGP []BGPParameters `json:"bgp,omitempty" tf:"bgp,omitempty"`

	// An optional description of this resource.
	// +kubebuilder:validation:Optional
	Description *string `json:"description,omitempty" tf:"description,omitempty"`

	// Indicates if a router is dedicated for use with encrypted VLAN
	// attachments (interconnectAttachments).
	// +kubebuilder:validation:Optional
	EncryptedInterconnectRouter *bool `json:"encryptedInterconnectRouter,omitempty" tf:"encrypted_interconnect_router,omitempty"`

	// A reference to the network to which this router belongs.
	// +crossplane:generate:reference:type=Network
	// +crossplane:generate:reference:extractor=github.com/upbound/provider-gcp/config/common.SelfLinkExtractor()
	// +kubebuilder:validation:Optional
	Network *string `json:"network,omitempty" tf:"network,omitempty"`

	// Reference to a Network to populate network.
	// +kubebuilder:validation:Optional
	NetworkRef *v1.Reference `json:"networkRef,omitempty" tf:"-"`

	// Selector for a Network to populate network.
	// +kubebuilder:validation:Optional
	NetworkSelector *v1.Selector `json:"networkSelector,omitempty" tf:"-"`

	// The ID of the project in which the resource belongs.
	// If it is not provided, the provider project is used.
	// +kubebuilder:validation:Optional
	Project *string `json:"project,omitempty" tf:"project,omitempty"`

	// Region where the router resides.
	// +kubebuilder:validation:Required
	Region *string `json:"region" tf:"region,omitempty"`
}

// RouterSpec defines the desired state of Router
type RouterSpec struct {
	v1.ResourceSpec `json:",inline"`
	ForProvider     RouterParameters `json:"forProvider"`
	// THIS IS A BETA FIELD. It will be honored
	// unless the Management Policies feature flag is disabled.
	// InitProvider holds the same fields as ForProvider, with the exception
	// of Identifier and other resource reference fields. The fields that are
	// in InitProvider are merged into ForProvider when the resource is created.
	// The same fields are also added to the terraform ignore_changes hook, to
	// avoid updating them after creation. This is useful for fields that are
	// required on creation, but we do not desire to update them after creation,
	// for example because of an external controller is managing them, like an
	// autoscaler.
	InitProvider RouterInitParameters `json:"initProvider,omitempty"`
}

// RouterStatus defines the observed state of Router.
type RouterStatus struct {
	v1.ResourceStatus `json:",inline"`
	AtProvider        RouterObservation `json:"atProvider,omitempty"`
}

// +kubebuilder:object:root=true

// Router is the Schema for the Routers API. Represents a Router resource.
// +kubebuilder:printcolumn:name="READY",type="string",JSONPath=".status.conditions[?(@.type=='Ready')].status"
// +kubebuilder:printcolumn:name="SYNCED",type="string",JSONPath=".status.conditions[?(@.type=='Synced')].status"
// +kubebuilder:printcolumn:name="EXTERNAL-NAME",type="string",JSONPath=".metadata.annotations.crossplane\\.io/external-name"
// +kubebuilder:printcolumn:name="AGE",type="date",JSONPath=".metadata.creationTimestamp"
// +kubebuilder:subresource:status
// +kubebuilder:resource:scope=Cluster,categories={crossplane,managed,gcp}
type Router struct {
	metav1.TypeMeta   `json:",inline"`
	metav1.ObjectMeta `json:"metadata,omitempty"`
	Spec              RouterSpec   `json:"spec"`
	Status            RouterStatus `json:"status,omitempty"`
}

// +kubebuilder:object:root=true

// RouterList contains a list of Routers
type RouterList struct {
	metav1.TypeMeta `json:",inline"`
	metav1.ListMeta `json:"metadata,omitempty"`
	Items           []Router `json:"items"`
}

// Repository type metadata.
var (
	Router_Kind             = "Router"
	Router_GroupKind        = schema.GroupKind{Group: CRDGroup, Kind: Router_Kind}.String()
	Router_KindAPIVersion   = Router_Kind + "." + CRDGroupVersion.String()
	Router_GroupVersionKind = CRDGroupVersion.WithKind(Router_Kind)
)

func init() {
	SchemeBuilder.Register(&Router{}, &RouterList{})
}