add elastic

Elastic/filebeat.txt

@@ -0,0 +1,127 @@
+========
+Filebeat
+========
+
+- Tutorial: https://www.elastic.co/guide/en/beats/filebeat/current/index.html
+- Config example: https://github.com/elastic/beats/blob/master/filebeat/filebeat.yml
+
+
+Config template
+---------------
+
+``filebeat.yml``::
+
+    ###################### Filebeat Configuration Example #########################
+
+    # This file is an example configuration file highlighting only the most common
+    # options. The filebeat.full.yml file from the same directory contains all the
+    # supported options with more comments. You can use it as a reference.
+    #
+    # You can find the full configuration reference here:
+    # https://www.elastic.co/guide/en/beats/filebeat/index.html
+
+    #=========================== Filebeat prospectors =============================
+
+    filebeat.prospectors:
+
+    # Each - is a prospector. Most options can be set at the prospector level, so
+    # you can use different prospectors for various configurations.
+    # Below are the prospector specific configurations.
+
+    - input_type: log
+
+      # Paths that should be crawled and fetched. Glob based paths.
+      paths:
+        - /var/log/*.log
+        #- c:\programdata\elasticsearch\logs\*
+
+      # Exclude lines. A list of regular expressions to match. It drops the lines that are
+      # matching any regular expression from the list.
+      #exclude_lines: ["^DBG"]
+
+      # Include lines. A list of regular expressions to match. It exports the lines that are
+      # matching any regular expression from the list.
+      #include_lines: ["^ERR", "^WARN"]
+
+      # Exclude files. A list of regular expressions to match. Filebeat drops the files that
+      # are matching any regular expression from the list. By default, no files are dropped.
+      #exclude_files: [".gz$"]
+
+      # Optional additional fields. These field can be freely picked
+      # to add additional information to the crawled log files for filtering
+      #fields:
+      #  level: debug
+      #  review: 1
+
+      ### Multiline options
+
+      # Mutiline can be used for log messages spanning multiple lines. This is common
+      # for Java Stack Traces or C-Line Continuation
+
+      # The regexp Pattern that has to be matched. The example pattern matches all lines starting with [
+      #multiline.pattern: ^\[
+
+      # Defines if the pattern set under pattern should be negated or not. Default is false.
+      #multiline.negate: false
+
+      # Match can be set to "after" or "before". It is used to define if lines should be append to a pattern
+      # that was (not) matched before or after or as long as a pattern is not matched based on negate.
+      # Note: After is the equivalent to previous and before is the equivalent to to next in Logstash
+      #multiline.match: after
+
+
+    #================================ General =====================================
+
+    # The name of the shipper that publishes the network data. It can be used to group
+    # all the transactions sent by a single shipper in the web interface.
+    #name:
+
+    # The tags of the shipper are included in their own field with each
+    # transaction published.
+    #tags: ["service-X", "web-tier"]
+
+    # Optional fields that you can specify to add additional information to the
+    # output.
+    #fields:
+    #  env: staging
+
+    #================================ Outputs =====================================
+
+    # Configure what outputs to use when sending the data collected by the beat.
+    # Multiple outputs may be used.
+
+    #-------------------------- Elasticsearch output ------------------------------
+    output.elasticsearch:
+      # Array of hosts to connect to.
+      hosts: ["localhost:9200"]
+
+      # Optional protocol and basic auth credentials.
+      #protocol: "https"
+      #username: "elastic"
+      #password: "changeme"
+
+    #----------------------------- Logstash output --------------------------------
+    #output.logstash:
+      # The Logstash hosts
+      #hosts: ["localhost:5044"]
+
+      # Optional SSL. By default is off.
+      # List of root certificates for HTTPS server verifications
+      #ssl.certificate_authorities: ["/etc/pki/root/ca.pem"]
+
+      # Certificate for SSL client authentication
+      #ssl.certificate: "/etc/pki/client/cert.pem"
+
+      # Client Certificate Key
+      #ssl.key: "/etc/pki/client/cert.key"
+
+    #================================ Logging =====================================
+
+    # Sets log level. The default log level is info.
+    # Available log levels are: critical, error, warning, info, debug
+    #logging.level: debug
+
+    # At debug level, you can selectively enable logging only for some components.
+    # To enable all selectors use ["*"]. Examples of other selectors are "beat",
+    # "publish", "service".
+    #logging.selectors: ["*"]

Elastic/index.txt

@@ -0,0 +1,9 @@
+=======
+Elastic
+=======
+
+.. toctree::
+   :maxdepth: 2
+   :glob:
+
+   *