OrionXConfig.h

#ifndef ORIONXCONFIG_H
#define ORIONXCONFIG_H
/*
   OrionXConfig.h - Orion WSPR Beacon for pico-Balloon payloads for Arduino

   Copyright (C) 2018-2019 Michael Babineau <mbabineau.ve3wmb@gmail.com>

   This program is free software: you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
   the Free Software Foundation, either version 3 of the License, or
   (at your option) any later version.

   This program is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU General Public License for more details.

   You should have received a copy of the GNU General Public License
   along with this program.  If not, see <http://www.gnu.org/licenses/>.
*/
#include <Arduino.h>
#define OFF false
#define ON true

// THIS FILE CONTAINS THE USER MODIFIABLE #DEFINES TO CONFIGURE THE ORION WSPR BEACON
// See Orion Manual for configuration details. 

#define ORION_FW_VERSION "v1.0"  // Whole numbers are for released versions. (i.e. 1.0, 2.0 etc.)
// Numbers to the right of the decimal are allocated consecutively, one per GITHUB submission.(i.e. 0.01, 0.02 etc)
// a = alpha b=beta, r=release


#define DEBUG_LOG_INITIAL  OFF          // This is the intial setting for g_debug_on_off in the serial monitor.
                                        // THIS SHOULD BE SET TO OFF FOR FLIGHT
                                        
#define TX_LOG_INITIAL OFF               // This determines the intial setting for g_txlog_on_off in the serial monitor.
                                        // THIS SHOULD BE SET TO OFF FOR FLIGHT
                                        
#define INFO_LOG_INITIAL OFF             // This determines the intial setting for g_info_log_on_off in the serial monitor.
                                        // THIS SHOULD BE SET TO OFF FOR FLIGHT

/***********************************************************
   USER SPECIFIED PARAMETERS FOR WSPR
 ***********************************************************/
#define BEACON_FREQ_HZ            14097010UL    //  Base Frequency In Hz for use when QRM Avoidance is enabled. Actual Tx frequency is BEACON_FREQ_HZ + a random offset.
#define FIXED_BEACON_FREQ_HZ      14097070UL    //  Beacon Frequency In Hz for use when QRM Avoidance is disabled.
#define PARK_FREQ_HZ              108000000ULL  // Use this on clk SI5351A_PARK_CLK_NUM to keep the SI5351a warm to avoid thermal drift during WSPR transmissions. Max 109 Mhz.

// Configuration parameters for Primary WSPR Message (i.e. Callsign, 4 character grid square and power out in dBm)
#define BEACON_CALLSIGN_6CHAR   "VE3WMB"      // Your beacon Callsign, maximum of 6 characters
#define BEACON_GRID_SQ_4CHAR    "AA01"        // Your hardcoded 4 character Grid Square - this will be overwritten with GPS derived Grid
#define BEACON_TX_PWR_DBM          7          // Beacon Power Output in dBm (5mW = 7dBm)       

#define OPERATING_VOLTAGE_Vx10       30        // This is the sampled VCC value x 10  required to initiate beacon operation (i.e 33 means 3.3v) 
#define SHUTDOWN_VOLTAGE_Vx10        20        // Sampled VCC value x 10. Readings below this value will initiate the transition to SHUTDOWN_ST

#define OPERATING_VOLTAGE_GUARD_TMO_MS 3600000      // Guard Timeout value for  1 hour (60,000 ms / minute x 60 
#define CALIBRATION_GUARD_TMO_MS  90000             // Guard Timeout value for 1.5 minutes (60,000 ms / minute x 1.5) 
#define INITIAL_CALIBRATION_GUARD_TMO_MS  1200000   // Guard Timeout value for 20 minutes (60,000 ms / minute x 20)
#define GPS_LOS_GUARD_TMO_MS              1800000   // Guard Timeout value for 30 minutes (60,000 ms / minute x 30)

// Type Definitions

struct OrionTelemetryData {
  float latitude;
  float longitude;
  int32_t altitude_cm;
  uint32_t speed_mkn;
  int temperature_c;
  int processor_temperature_c;
  uint8_t battery_voltage_v_x10;
  uint8_t number_of_sats;
  uint8_t gps_status;
};

struct OrionTxData {
  char grid_sq_6char[7]; // 6 Character Grid Square calculated from GPS Lat/Long values.
  int32_t altitude_m;
  uint32_t speed_kn;
  int temperature_c;
  int processor_temperature_c;
  uint8_t number_of_sats;
  uint8_t gps_status;
  uint8_t battery_voltage_v_x10;
};


enum OrionCalibrationResult {PASS, FAIL_PPS, FAIL_SAMPLE};
enum OrionWsprMsgType {PRIMARY_WSPR_MSG, ALTITUDE_TELEM_MSG, TEMPERATURE_TELEM_MSG, VOLTAGE_TELEM_MSG};

enum QrssMode {MODE_NONE, MODE_QRSS, MODE_FSKCW, MODE_DFCW};
enum QrssSpeed {s12wpm, QRSS3, QRSS6, QRSS10};

#endif