Gallery

Three of a kind...

d.ti created the fantastic ESP32 based PCB Rev 1.2 for the SSD1322 OLED
Info: ESP32 Wroom 32D MCU, Micro USB Socket at back side, SPI and I2C Sockets for your own Projects.
You can add: MIC184 Temperature Sensor, Buzzer, WS2812 LED and a Tilt Switch.
Links to the free Rev 1.2 Project files: KiCad Project / Gerber Files / BOM / Schematics / 3D Model

rbz's Couch-Case 😃
rbz is the creator of the great i2c2oled and tty2oled picture viewer.

stefer09 new enclosure.

d.ti created an absolute fantastic ESP32 based PCB and a matching Case for an 3.12" OLED.
Some Infos: ESP32 Wroom 32D MCU, USB Socket at back side, MIC184 Temperature Sensor (if added), SPI and I2C Sockets for your own Projects.
Links to the free Rev1.1 Project files: KiCad Project / Gerber Files / BOM / Schematics / Case / Assembly Instructions

jawler's build. Little Bigger than mine 😃.

d.ti uses his own Case and PCB (KiCad & Gerber) for an 2.8" Display
He sent me an printed Case and a PCB which I use with my test system. Many Thx 😃!

stefer09 uses an 20 Pin OLED from Newhaven with an ESP8266.
The Display Connection Mode (SPI/Parallel) can be changed via Display Pins instead of re-solder tiny resistors.
See Electrical for his connection Scheme.

Mellified's Devkitc V4 solderless & breakout solution.
His MiSTer_SAM Tool supports tty2oled.

Reg's Checkmate 1500 build

WiteWulf got it soldered and working in less than an hour

RealLarry's external Set-Top Case for an 3.12" OLED, see Cases

RealLarry's testing of a 5.5" OLED with GreyScale picture

gojira54 uses the TTGO-T8 PCB

dave18's case with an 128x64 Pixel OLED

Jukk@M's digibox (HDTHUNDER HD5521SR)

My Final?

Testing Hardware (ESP32 Wemos Lolin32, ext. Adafruit SD-Breakout, 3.12" SSD1322)

Hope for some more Pics here.